Energenie ENER008 Bruksanvisning
Sidor 1 Engels Elskena
Läs bruksanvisningen för Energenie ENER008 gratis online eller ladda ner PDF:en. 53 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
PC – Automatic Standby Shutdown
Installation
InstallationInstallation
Installation (see picture
(see picture (see picture
(see picture):
): ):
):
a.Plug your Desk Computer and other office appliances such
as printers, monitors, scanners etc into any of the 4
controlledcontrolledcontrolledcontrolled sockets of the extension lead. Plug any device
requiring continuous power e.g. fax machine into the
always
alwaysalways
always-
--
-on
onon
on socket.
b.Stick the reset button conveniently on or near to your
computer.
First time set up
First time set up First time set up
First time set up –
––
– power learning
power learning power learning
power learning
c.Plug the extension lead into a mains wall socket and
switch ON.
d.The operating light should flash slowly for 3 seconds then
remain illuminated. (If it doesn’t, press the button on the
device for 4 seconds at least until the light starts flashing).
The device is now in power learning modepower learning modepower learning modepower learning mode.
e. Place all your connected devices into Standby and wait for
at least 30 seconds.
f.Then press the button on the device to end the learning
cycle. The light will turn off and the sockets are off.
----To turn ON the SocketsTo turn ON the SocketsTo turn ON the SocketsTo turn ON the Sockets: : : :
Press the reset button on the flying lead. The light on the Standby
Shutdown will illuminate indicating all the controlled sockets are
re-powered. Power up your computer system as usual. *
-
--
-To tur
To turTo tur
To turn OFF
n OFFn OFF
n OFF:
::
:
Power down your desk computer as normal. After 1 minute the
Standby Shutdown will automatically
automaticallyautomatically
automatically turn off the power to all the
controlled sockets.
*
Note
: You may also press the button on the front of the Standby
Shutdown device to re-enable the sockets.
SpecificationSpecificationSpecificationSpecification
Voltage: 240V~ 50Hz
Max .current: 13A
Max. load: 3kW
Colour: Black/White
Mains cable: 1.5m
Sensor cable: 1.3m
4 controlled sockets
1 always ON socket
Product code: ENER008
Power consumption in standby: <1W.
Note
: The Standby Shutdown will retain
its memory after a loss of power.
If you wish to change the number of
connected appliances you will need to re-
enter the power learning cycle. Press the
button on the front of the device for 4
seconds to clear the previously set power
level.
The indicator light will start flashing
ready. Then carry on from e.
Note
: The Standby Shutdown will retain
its memory after a loss of power.
Produktspecifikationer
| Varumärke: | Energenie |
| Kategori: | Elskena |
| Modell: | ENER008 |
Behöver du hjälp?
Om du behöver hjälp med Energenie ENER008 ställ en fråga nedan och andra användare kommer att svara dig
Elskena Energenie Manualer
Energenie EG-PM2-LAN Bruksanvisning Energenie EG-PM2 Bruksanvisning Energenie EG-SMS Bruksanvisning Energenie ENER009 Bruksanvisning
Alla Energenie Elskena manualer
Elskena Manualer
Nyaste Elskena Manualer
Sven SF-08E-16 Bruksanvisning Brennenstuhl Estilo Bruksanvisning Huslog EMX-190224 Bruksanvisning Vivanco EPLS 4USB_ALU Bruksanvisning Vivanco EPLS 4ALU Bruksanvisning Vivanco EPLS 3_1ALU2M Bruksanvisning Vivanco EBLS 3W2USB Bruksanvisning Vivanco EPLS 5_1ALU2M Bruksanvisning Vivanco EPLS 7_1ALU2M Bruksanvisning Bauhn AP5W-0624 Bruksanvisning