Ensemble Designs BrightEye 11 Bruksanvisning
Ensemble Designs
ej kategoriserat
BrightEye 11
Läs gratis den bruksanvisning för Ensemble Designs BrightEye 11 (20 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Ensemble Designs BrightEye 11 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
This user guide provides detailed information for using the BrightEye™11 SDI
to Analog Converter module.
The information is organized into the following sections:
• Product Overview
• Functional Description
• Rear Connectors
• Operation
• Front Panel Controls and Indicators
• Using The BrightEye Control Application
• Warranty and Factory Service
• Specifications
• Glossary
BrightEye-1
TM
BrightEye 11
SDI to Analog Converter
User Guide
Revision 3.0 SW v1.0.4
ENSEMBLE
DESIGNS
BrightEye 11 SDI to Analog Converter
PRODUCT OVERVIEW
BrightEye™ 11 provides digital to analog conversion with the full range of analog
output formats available: Beta, SMPTE, RGB, and Composite (with simultaneous
S-Video Y/C outputs). 12 bit processing and conversion at 8x oversampling mean
the best looking images possible.
Output format and gain are controlled from the front panel. The BrightEye
Control application also provides remote control of the unit from a personal
computer with USB support. A status display on the front panel indicates input
presence.
BrightEye 11 is the perfect choice to feed monitors, VTRs, or video projectors.
A glossary of commonly used video terms is provided at the end of this user guide.
FUNCTIONAL DESCRIPTION
As shown in the functional block diagram below, serial digital video is fed to the
converter on a single BNC connector.
The SDI input is routed directly to the SDI Out BNC and the reclocking and dese-
rializing circuitry before entering the D to A converter.
The converted analog signal is then encoded to the desired output format as
chosen on the front panel or with BrightEye PC or Mac. During this stage, gain
can be adjusted for the correct output levels.
BrightEye 11 is powered by a 12 volt DC universal power supply. This power
supply can accept an input voltage between 90 and 230 volts, at 50 or 60 Hertz. It
uses a standard IEC line cord and can be used anywhere in the world. It is
normal for the converter to be quite warm to the touch when operating.
BrightEye-2
Reclocker
Deserializer
SDI Out
SDI In
C, Pr, R Out
Cpst, Y, G Out
Y, Pb, B Out
Front Panel Controls
Gain Adjust
12-bit
D to A
Converter
and
Video
Encoder
BrightEye 11 Functional Block Diagram
Produktspecifikationer
| Varumärke: | Ensemble Designs |
| Kategori: | ej kategoriserat |
| Modell: | BrightEye 11 |
Behöver du hjälp?
Om du behöver hjälp med Ensemble Designs BrightEye 11 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Ensemble Designs Manualer
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
ej kategoriserat Manualer
- Plextor
- Hamilton Beach
- Sure Petcare
- Artusi
- Biltema
- Alden
- Graef
- Arturia
- Lagrange
- Cat & Hound
- Aqua Computer
- MRCOOL
- Nevadent
- AquaMAX
- ARC
Nyaste ej kategoriserat Manualer
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025