Epcom X6465A Bruksanvisning
Epcom
Inte kategoriserad
X6465A
Läs gratis den bruksanvisning för Epcom X6465A (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 14.5 recensioner. Har du en fråga om Epcom X6465A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
A low prole LED beacon with a long, maintenance-free
service life. These beacons are ideal for industrial vehicle
applications and feature a 12-80 VDC operating range.
Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices
are essential to ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause
high current arcing, which can cause personal injury and/or severe vehicle damage, including re.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In
use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e.,
open trunks or compartment doors), people, vehicles, or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against trafc, responding at a high rate of speed, walking on or around trafc lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obey-
ing all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal
laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
Page 1 of 3
Installation and Operation Instructions
LED Beacon
Produktspecifikationer
| Varumärke: | Epcom |
| Kategori: | Inte kategoriserad |
| Modell: | X6465A |
Behöver du hjälp?
Om du behöver hjälp med Epcom X6465A ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Epcom Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Inte kategoriserad Manualer
- Voltcraft
- RCF
- Zenit
- Ilford
- Amgrow
- Econ Connect
- Enduro
- Max
- Parkside
- GRAUGEAR
- Multibrackets
- JOBY
- Umidigi
- Huion
- Flavour Blaster
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025