Epcom X67-RB Bruksanvisning
Epcom
Inte kategoriserad
X67-RB
Läs gratis den bruksanvisning för Epcom X67-RB (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om Epcom X67-RB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Operation and Maintenance
To be able to manipulate the equipment, it is necessary to connect
the harness of the lightbar with the harness of the X303 controller,
making sure they are correctly connected until a click is heard.
It is recommended to periodically check the mounting bolts to
avoid any accidents.
Use mild soap and a soft cloth to clean the plastic
covers.
Note: Do not use gasoline or other organic solvents to clean the
plastic cover, otherwise they will crack or become opaque.
Content
•Lightbar X67RB 1 Pz
• Controller X 1 Pz 303
• 1 Pz Hook Mount
We are not responsible:
1) .Hits or scratches during use
2) If they use the wrong voltage.
3) By using a chemical to perform some maintenance
and / or cleaning of the equipment.
User Manual
Lightbar
X67RB
INTRODUCTION
Thank you for choosing our lightbar, which managesX67RB
70 Brilliant LED Gen III (Generation III); In order to meet your
needs and ensure excellent performance.
The X67RB lightbar, handles the highest LED technology, high
brightness, low power consumption and long service life.
Please read the manual before installing the lightbar, toX67RB
avoid damage due to improper use.
Technical Data
• Voltage: 12VDC
• Co : 12 A Max nsumption
• -40 55°C Temperature： ～
• : 13 Flash Patterns
• Dim sions: 1en 18cm x 34cm x 12cm
Power Supply Connnection
• Red Cable: VCC
• Black Cable: GND
C X 3 ontroller 30
Selector 1.- 4 : Has positions
1. Lightbar OFF
2. Turn on 1 red module and 1 blue module both from
the rear.
3. Turn on 1 red module and 1 blue module on the front;
2 red modules and 2 blue modules on the back.
4. They light 2 red modules and 2 blue modules on the front;
3 red modules and 3 blue modules on the back of the bar.
Switch 1.- Allows changing the type of lights pattern.
Switch 2.- It allows to light the left alleyway light.
Switch 3.- It allows to turn on the penetration lights.
Switch 4.- It allows to light the right alleyway light.
Selector 2.- This selector allows you to manipulate the Signal
master of the lightbar, it has 4 positions:
1. Sig l Master Turn OFF na
2. Addressing from right to left
3. Addressing from left to right
4. Addressing the center out
Produktspecifikationer
| Varumärke: | Epcom |
| Kategori: | Inte kategoriserad |
| Modell: | X67-RB |
Behöver du hjälp?
Om du behöver hjälp med Epcom X67-RB ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Epcom Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Inte kategoriserad Manualer
- Roccat
- Vermeiren
- Xigmatek
- Chrome-Q
- Walrus Audio
- Henry Engineering
- C2G
- Iseki
- DAB
- Franklin
- Libec
- Game Factor
- Truetone
- Korona
- RUBI
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025