Epson PowerLite 73c Bruksanvisning

Läs gratis den bruksanvisning för Epson PowerLite 73c (2 sidor) i kategorin Beamer. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Epson PowerLite 73c eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1Remove the lens cover.

2Connect the power cord to your projector and plug

the other end into an electrical outlet.

3Press the button. The Power lightPower

flashes green, and then stays on.

4Turn on or restart your laptop. (Windows®only:

If you see this Add New Hardware screen,

click Cancel.)

S

T

A

R

T

H

E

R

E

Turn over

Turn on your equipment

Connect the projector

to your laptop

Power cordComputer cable

Follow these instructions to connect the projector

to your laptop. To connect other devices, such as

a VCR, DVD, or desktop PC, see your User’s Guide.

EPSON®PowerLite®53c/73c

Quick Setup

Lens cover

Caution: Before unplugging

the projector...

To shut the projector down properly:

1. Press the Power button twice.

Let the projector cool while the

Power light flashes orange

(about 45 seconds).

2. Once the light stops flashing and

stays on, it’s safe to unplug

the projector.

Never unplug the projector when

the Power light is green or

flashing orange.

For most setups, you’ll need just these two cables:

Power light

1Make sure your projector and laptop are turned off.

2Connect one end of the computer cable to the

Computer/Component Video port on the projector.

3Connect the other end to your laptop’s video or monitor port.

If you can’t connect the cable to your PowerBook,

®you may need

to use an adapter. See your User’s Guide for instructions.

Monitor OutS-Video Video

Audio1L Audio2 RControl

(RS-232C)

Computer/

Component Video

Produktspecifikationer