Epson Powerlite 824+ Bruksanvisning

Läs gratis den bruksanvisning för Epson Powerlite 824+ (4 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 32 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9 recensioner. Har du en fråga om Epson Powerlite 824+ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User’s Guideon your projector CD.

Your projector may vary slightly from the one shown in this sheet, Quick Setup

but the procedures are the same.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector’s or port, and the Computer1 Computer2

other end to your computer’s monitor port. If you are using a notebook,

switch it to external display. You can also connect an audio cable to the

Audio1 Audio2or port.

Computer USB Port

Connect a computer (Windows®2000 SP4 or later or Mac OS® X 10.5.1-10.6)

using the USB cable that came with the projector.

Connect the square end of the USB cable to the projector’sTypeB

(square) USB port. Connect the flat end of the cable to any USB port on your

computer. Then turn on your projector (see “Turn on your equipment”). You

can also connect an audio cable to the port.Audio2

Follow the on-screen instructions to install the Epson USB Display software

(with Mac OS X, first double-click the icon that appears USB Display Installer

on your computer screen). Then press the button on the remote control. USB

(You need to install the software only the first time you connect.)

Video Player

Connect up to 4 video devices and use the remote control to switch between

them.

RCA video cable

(composite video)

(optional)

S-Video

cable

(optional)

Component-to-

VGA cable

(optional)

Audio cable

(optional)

Microphone

Connect a dynamic or condenser microphone to the port, using a 3.5 mm Mic

mini-jack cable.

NOTE:If you’re using a condenser microphone, set the setting Plug-in Power

to On. See the User’s Guideon your projector CD for more information.

For information on playing sound through the projector or connecting an

external monitor, see the User’s Guideon your projector CD.

Turn on your equipment

1Turn on your computer or video source.

2Plug in the projector.

3 Open the slide all the way.A/V Mute

PowerLite® 84+/824+

Produktspecifikationer