Epson WorkForce Pro WP-4090 Bruksanvisning

Epson Skrivare WorkForce Pro WP-4090

Läs gratis den bruksanvisning för Epson WorkForce Pro WP-4090 (4 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9 recensioner. Har du en fråga om Epson WorkForce Pro WP-4090 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Start Here
Read these instructions before using your printer.
1 Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2 Turn on
1 Connect the power cord to the back of the printer and to an
electrical outlet.
Do not connect to a computer yet.Caution:
2 Press the power button.
3 Install ink cartridges
1 Open the front cover.
2 Unpack the four ink cartridges.
3 Shake each cartridge as shown for about 5 seconds.
4 Install each cartridge in the correct slot for its color.
Push each cartridge in until it clicks.
5 Close the front cover.
The printer starts priming the ink. This takes about 12
minutes. When the green power light stops flashing,
priming is complete.
Note: The included cartridges prime the printer and print about 1000
black pages/900 color pages. Actual page count may vary.
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
*412216300*
*412216300*
WorkForce® Pro WP-4090


Produktspecifikationer

Varumärke: Epson
Kategori: Skrivare
Modell: WorkForce Pro WP-4090

Behöver du hjälp?

Om du behöver hjälp med Epson WorkForce Pro WP-4090 ställ en fråga nedan och andra användare kommer att svara dig