ESQ Quest Retrograde Bruksanvisning

ESQ Titta Quest Retrograde

Läs gratis den bruksanvisning för ESQ Quest Retrograde (3 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11 recensioner. Har du en fråga om ESQ Quest Retrograde eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

RETROGRADE DAY MODELS

Includes Quest 3-hand Retrograde Weekday models with Big Date

Legend

H - Hour hand

M - Minute hand

S - Seconds hand

W - Retrograde weekday indicator

D - Big Date display

Crown positions:

Position 1: Normal function. Crown pushed against case. (Watch runs)

Position 2: Position for Quick Change of Big Date. Rotate crown

counterclockwise. (Watch continues to run)

Position 3: Time/Weekday setting. (Watch stops)

These 3-hand quartz models feature a pie-shaped Retrograde Weekday

indicator, and a Big Date display (an oversized date window with two

single-digit disks that rotate independently of one another) with direct

advance from 31 to 01.

TIME/DATE SETTING

To set the Time:

1. Pull crown out to position 3; watch stops.

2. Turn crown in either direction until hands indicate desired time.

3. Push crown back in to position 1; watch restarts.

To correct the Retrograde Weekday Setting:

1. Pull crown out to position 3; watch stops.

2. Turn crown clockwise, advancing hands past midnight one or more

times, until retrograde hand W indicates correct day of week.

NOTE: Big Date display D will advance by one each time the

hands pass midnight.

3. Push crown back in to position 1; watch restarts.

To set the Big Date (Quick Change Mode):

1. Pull crown out to position 2; watch continues to run.

2. Turn crown counterclockwise to advance date in Big Date display D.

3. When desired date is displayed in D, push crown back in to position 1.

NOTES: If you turn the crown too rapidly during Date Setting in Quick

Change Mode, you may inadvertently advance past desired date. If this

happens, continue to turn crown counterclockwise, advancing through

dates past 31 to 01, then on to correct date.

Each day during the calendar “jump phase” – the hours between 10:00

pm and 12:00 midnight – the Big Date will advance automatically. It may

be adjusted manually during these hours; however it must be set to the

following day: the date will not automatically change at midnight if it has

been manually adjusted during the jump phase.

Produktspecifikationer

Varumärke:	ESQ
Kategori:	Titta
Modell:	Quest Retrograde
Färg på produkten:	Wit
Lätt att städa:	Ja
Tillgångar:	200 W
På / Av knapp:	Ja
Sapcontainer:	Ja
Rengöringsborste:	Ja
Kan:	Ja
AC-ingångsspänning:	230 V
Strömförbrukning (typiskt):	200 W
Typ produkt:	Sapcentrifuge
Avtagbar juicebehållare:	Ja
Massabehållare:	Ja ml
Filtermaterial:	Roestvrijstaal