Estella SLA13 Bruksanvisning
Estella
skärmaskin
SLA13
Läs gratis den bruksanvisning för Estella SLA13 (18 sidor) i kategorin skärmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om Estella SLA13 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/18
USER MANUAL
www.EstellaEquipment.com
HEAVY-DUTY
MEAT SLICERS
#348SLM12 • 12" Manual
#348SLM13 • 13" Manual
#348SLA13 • 13" Automatic
#348SLAS13 • 13" Automatic w/ Scale & Slice Counter
#9801614 #9801614
CONFORMS TO UL STD. 763
CONFORMS TO CSA C.22.2
CONFORMS TO NSF 8
08/2024
www.EstellaEquipment.com2
USER MANUAL
INTRODUCTION
Congratulations on your purchase of Estella Equipment. Estella Equipment takes pride in the design and quality
of our products. When used as intended and with proper care and maintenance, you will experience years
of reliable operation from this equipment. To ensure best results, it is important that you read and follow the
instructions in this manual carefully.
INDEX
Serial Plate ..................................................... 2
Unboxing ........................................................ 2
Safety Precautions ................................... 3-4
Parts Details ................................................... 5
Installation ...................................................... 6
Controls........................................................7-8
Preliminary Checks ...................................... 9
Operation ................................................ 10-13
Blade Sharpening ........................................14
Cleaning ................................................... 15-16
Maintenance ................................................. 17
Troubleshooting ...........................................18
SERIAL PLATE
Serial plate containing important electrical data, certifications, and warnings is located on the back of the unit.
UNBOXING
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All equipment should be examined for damage before and during unloading. The freight carrier has assumed
responsibility for its safe transit and delivery. If equipment is received damaged, either apparent or concealed,
a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed by
the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can supply the
necessary forms.
B) If concealed damage is not apparent until after equipment is uncrated, a request for inspection must be
made to the carrier within 5 days. The carrier should arrange an inspection. Be certain to hold all contents and
packaging material.
Installation and service should be performed by a qualified installer who thoroughly reads, understands, and
follows these instructions.
If you have questions concerning the installation, operation, maintenance, or service of this product, visit Estella
Equipment www.estellaequipment.com.
Produktspecifikationer
| Varumärke: | Estella |
| Kategori: | skärmaskin |
| Modell: | SLA13 |
Behöver du hjälp?
Om du behöver hjälp med Estella SLA13 ställ en fråga nedan och andra användare kommer att svara dig
skärmaskin Estella Manualer
23 Augusti 2025
skärmaskin Manualer
- Ecoline
- Ade
- Ritter
- Boska
- Prince Castle
- Dedra
- Continental Edison
- Globe
- Tristar
- GARDE
- Garde XL
- Avantco
- Graef
- Gude
- Create
Nyaste skärmaskin Manualer
26 Augusti 2025
26 Augusti 2025
25 Augusti 2025
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025