ETC Source 4WRD II Bruksanvisning

ETC Inte kategoriserad Source 4WRD II

Läs gratis den bruksanvisning för ETC Source 4WRD II (28 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om ETC Source 4WRD II eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/28
Source 4WRD II
HPL to LED Retrofit (CE)
Installation and User Manual
Version 2.0.0
Part Number: 7067M1210-2.0.0 Rev B
Released: 2021-05
To view a list of ETCtrademarks and patents, go to
etcconnect.com/ip(missing or bad snippet). All other trademarks,
both marked and not marked, are the property of their respective
owners.
ETC intends this document, whether printed or electronic, to be
provided in its entirety.
Table of Contents
Source 4WRD II Installation and User Manual i
Introduction
1
Help from ETC Technical Services
2
Safety
3
Retrofit the Fixture
5
Wire the Power Connector
5
Remove Incandescent Lamp Housing
6
Install the Source 4WRD II Retrofit
7
Install the Fixture
9
Attach Hanging Clamp and Safety Cable
9
Connect Cables
10
Configure the Fixture
13
RDMValues
13
Focus the Fixture
14
Set the Z-adjustment
14
Adjust the Yoke Position
15
Shape the Beam
16


Produktspecifikationer

Varumärke: ETC
Kategori: Inte kategoriserad
Modell: Source 4WRD II

Behöver du hjälp?

Om du behöver hjälp med ETC Source 4WRD II ställ en fråga nedan och andra användare kommer att svara dig