Extech 380400 Bruksanvisning
Sidor 1 Engels Inte kategoriserad
Läs bruksanvisningen för Extech 380400 gratis online eller ladda ner PDF:en. 17 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
3--GB_V1.5 9/19 80400en
User Manual
Resistance Decade Box
Model 3800 40
Introduction
Congratulations on your purchase of the Extech 380400 Resistance Decade Box. This device
oers 7 decades of resistance ranges from 1 to over 11MOhms (in 1Ohm steps). Slide switches
allow easy addition and subtraction of resistance values. Binding posts (3) oer simp and le
secure connections. Careful use of this decade box will provide years of reliable service.
Specications
Resistance ranges 1 to 11,111,110 Ohms in 1 Ohm steps
Internal Resistance 0.3 Ohms
Power 0.3W Resistors
Connection Three (3) binding posts
Accuracy 1% Reading) + 0.3 Ohms ±(
Operating conditions Temperature: 32 to 122oF (0 to 50oC) / Humidity: 80%RH <
Dimensions/Weight 5.79 x 4.61 x 1.3" (14.7 x 11.7 x 3.3 Approx. 0.69 lbs. (312 cm) / g)
Operation
Binding Post Connections
The binding posts can be used for connections in several ways:
1. A banana plug can be inserted directly into the posts.
2. Bare wire can be threaded through the post after it has been unscrewed. Once the bare wire is threaded, tighten the posts as
necessary.
3. Alligator clips can be used but use caution not to strip the post threads or plastic post housing.
The resistance output is available on the RED and the BLACK binding posts. The WHITE post is case ground and is typically not
used. Connect the positive lead of the device under test to the RED post. Connect the negative lead to the BLACK post. Use the
WHITE grounding post only if the device under test will be grounded to the 380400 case.
Range Selection
The front panel switches are used to select the resistance that will be available on the RED and BLACK terminals. When a switch 28
is set to the IN position, the value printed above the switch is added to the total resistance available at the posts. When the switch is
set to OUT it is excluded from the total resistance. If all of the switches are set to OUT, the total output resistance zero (+ 0.3Ohms is
internal resistance approx.). –
For example, if the desired output value is 10.5KOhms, set the following switches to the IN position: 10K, 400Ohmsand 100Ohms , .
Testing
This device can be used to verify the calibration integrity of MultiMeters, LCR meters, Calibrators, etc. Connect as described above in
the Binding Post Connection section. Set the resistance switches to output the desired resistance. Ensure that the voltage supplied
by the device under test does not overload the 0.3W internal resistor power rating. The device under test should read the value of
resistance selected on the tester. If it does not, the device under test may need calibration, adjustment, or repair.
Copyright - FLIR Systems, Inc. ©2013 2019
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com
Produktspecifikationer
| Varumärke: | Extech |
| Kategori: | Inte kategoriserad |
| Modell: | 380400 |
| Färg på produkten: | Zwart |
| Vikt: | 38600 g |
| Bredd: | 438 mm |
| Djup: | 762 mm |
| Höjd: | 88 mm |
| LED-indikatorer: | Ja |
| På / Av knapp: | Ja |
| Processorfamilj: | Intel® Xeon® E5 v3 |
| Ethernet LAN: | Ja |
| VGA (D-Sub) port(ar): | 1 |
| Antal Ethernet LAN (RJ-45)-portar: | 3 |
| Nätförsörjning: | 2000 W |
| Hållbarhetscertifikat: | ENERGY STAR |
| Ethernet LAN, dataöverföringshastigheter: | 10,100,1000 Mbit/s |
| Förvaringstemperatur: | -40 - 70 °C |
| Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A: | 3 |
| Processoruttag: | LGA 2011 (Socket R) |
| Systembuss: | 9.6 GT/s |
| Maximalt internminne: | 1000 GB |
| Inbyggd grafikadaptermodell: | Aspeed AST2400 |
| Förvaringsfuktighet: | 5 - 95 procent |
| Bostadstyp: | Rack (2U) |
| ETC: | Ja |
| Ethernet-gränssnittstyp: | Fast Ethernet, Gigabit Ethernet |
| Chipset moderkort: | Intel® C612 |
| PCI Express x16-platser: | 1 |
| Koppar Ethernet-kabelteknik: | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Gränssnitt för lagringsenheter som stöds: | SATA III |
| Seriell port(ar): | 1 |
| Minnesspänning: | 1.2 V |
| LAN-kontroller: | Intel® X540 |
| Typer av RAID: | 0, 1,10 |
| Antal SATA III-kontakter: | 6 |
| Kompatibla processorer: | Intel® Xeon® |
| Antal processorer som stöds: | 2 |
| Intel® Xeon-serien: | E5-2600 |
| Maximalt UDIMM-minne: | 32 GB |
| Antal DIMM-platser: | 16 |
| Antal lagringsenheter som stöds: | 3 |
| Storlekar för lagringsenheter stöds: | 3.5 " |
| Minnestyper som stöds: | DDR4-SDRAM |
| Hot-swap hårddiskfack: | Ja |
| Drifttemperatur (TT): | 10 - 35 °C |
| Relativ luftfuktighet i drift (VV): | 8 - 90 procent |
| BIOS-typ: | AMI |
| BIOS-minnesstorlek: | 128 Mbit |
| ACPI-version: | 2.0 |
| IPMI LAN (RJ-45) port: | Ja |
| BIOS-funktioner: | APM 1.2, PCI 2.2, SMBIOS 2.3, UEFI |
Behöver du hjälp?
Om du behöver hjälp med Extech 380400 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Extech Manualer
Extech PH90 Bruksanvisning Extech MS6100 Bruksanvisning Extech 382260 Bruksanvisning Extech 382276 Bruksanvisning Extech SD200 Bruksanvisning Extech 380820 Bruksanvisning Extech MO55 Bruksanvisning Extech 382200 Bruksanvisning