Extech 401025 Bruksanvisning
Extech
Ljusmätare
401025
Läs nedan 📖 manual på svenska för Extech 401025 (7 sidor) i kategorin Ljusmätare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/7
USER MANUAL
Model 401025
Digital Light Meter
Addional User Manual Translaons available at www.extech.com
401025- -GB_v2.9 5/18 en
2
Introduction
Congratulations on your purchase of the Extech Digital Light Meter. This device is shipped fully tested
and calibrated and, with proper use, will provide years of reliable service. Please visit our website
(www.extech.com) to check for the latest version of this User Guide, Product Updates, and Customer
Support.
Meter Description
1. LCD Display
2. Data Hold Switch
3. Power O/Range Switch
4. Analog Output Terminal
5. Battery Compartment (rear)
6. LUX/Fc Switch & Response Switch
7. Light Sensor
8. Zero adjust
401025- -GB_v2.9 5/18 en
3
Lux
Operation
1. Select Units (Lux or Ft-candle) and the Response Time (Fast/Slow) using the slide switch. Typical
selection is Slow and Fc using the gray lettering.
2. Select the maximum range using the Range Switch.
3. Hold the Light Sensor so that the sensor faces the light source to be measured.
4. The display will indicate measured values. Use a range display multiplier if on the Lux 20,000 and
50,000 ranges or on the Fc 5000 range (see notes below).
5. To hold (freeze) a measurement, slide the Data Hold Switch to the Hold ition. The reading will pos
freeze in the display until the Data Hold Switch is released.
Note 1: An Over Range indication is a display of "1__ ". If this occurs, switch to a higher range.
Note 2: For measurements made on the Fc 5000 range, the displayed reading must be multiplied by
10.
Note 3: For measurements made on the Lux 20000 or 50000 ranges the displayed reading must be
multiplied by 10 and 100 respectively.
Note 4: The meter will indicate values above the maximum ranges. The accuracy of these
measurements is unknown.
Range Display Multipliers
Range
Units
Multiplier
200
Fc
Direct reading
2000
Fc & Lux
Direct reading
5000
Fc
Reading x10
20,000
Lux
Reading x10
50,000
Lux
Reading x100
Example: If a measurement on the 5000 Fc range displays 350 the actual measured value is:
350 x 10 = 3500 Fc.
Produktspecifikationer
| Varumärke: | Extech |
| Kategori: | Ljusmätare |
| Modell: | 401025 |
Behöver du hjälp?
Om du behöver hjälp med Extech 401025 ställ en fråga nedan och andra användare kommer att svara dig
Ljusmätare Extech Manualer
24 Augusti 2024
20 Augusti 2024
15 Augusti 2024
10 Augusti 2024
7 Augusti 2024
Ljusmätare Manualer
- Ljusmätare Pyle
- Ljusmätare Voltcraft
- Ljusmätare Velleman
- Ljusmätare Steren
- Ljusmätare Kyoritsu
- Ljusmätare Gossen
- Ljusmätare Testboy
- Ljusmätare Fluke
- Ljusmätare Sekonic
- Ljusmätare Testo
- Ljusmätare Beha-Amprobe
- Ljusmätare Uni-T
- Ljusmätare Delta Ohm
- Ljusmätare PCE Instruments
- Ljusmätare Klein Tools
Nyaste Ljusmätare Manualer
8 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
29 December 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
21 September 2024
20 September 2024