Extech FL700 Bruksanvisning
Extech
Multimeter
FL700
Läs gratis den bruksanvisning för Extech FL700 (8 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4.5 recensioner. Har du en fråga om Extech FL700 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
User Manual
ExStik® FL700
Fluoride Meter
AdditionalUserManualTranslationsavailable at www.extech.com
FL700-en-GB_V1.6 12/16
2
Introduction
The model FL700 is a system specifically designed for the quick and accurate measurement of
fluoride ions in drinking water and other aqueous samples. Unlike other electrode based systems
the FL700 consists of the sensing electrode, measuring electronics, and the display in one
convenient package. This meter is shipped fully tested; with proper use, this instrument will
provide years of reliable service.
Features
Automatic temperature compensation (±10
oC of calibration temperature)
Automatic calibration
Stability sensing to optimize accuracy
Internal Datalogger for storing up to 25 readings
Direct reading of ppm, mV, or mg/l units
Automatic power off after 12 minutes to preserve battery life
Internal error detection
Four separate calibration points available (0.5, 1.0, 5.0 and 10.0ppm)
FL700-en-GB_V1.6 12/16
3
Description
Meter Description
1. Battery compartment cover
2. LCD Display
3. MODE/HOLD button
4. CAL/RECALL button
5. ON/OFF button
6. Electrode Retaining Collar (ring)
7. Electrode Sensor
(Note: The Electrode storage cap is not shown this diagram)
Electrode Sensor Description
The sensing electrode is a europium doped lanthanum fluoride single crystal
that has been incorporated into a removable sensing module that houses a
reference electrode and temperature measurement system. The high
resistance electrode signals are impedance converted to a low resistance output in the sensing
module to ensure stable and noise free performance.
Reagent Tablets
The FL700 allows the users to follow the ASTM and EPA standard methodology using any of the
TISAB reagents and standards already in use. Also, Extech has developed tablet-form TISAB which
contains all of the essential and approved chemicals that are found in the usual TISAB reagents. A
total ionic strength adjustment buffer (TISAB) is a buffer solution which increases the ionic
strength of a solution to a relatively high level.
The “dry” TISAB reagent does not contribute to sample dilution. The benefits of this method are:
1. No volumetric errors
2. Independent of sample size (± 20% of nominal sample volume)
3. Easy to use in the field or laboratory
4. Can be shipped more easily than liquid reagents
5. Lower cost per test
LCD Display
1. Bargraph display
2. Measurement units
3. Main display
4. Low (L) and High (H) Calibration icons
5. Data HOLD indicator
6. Low Battery indicator
7. Temperature display
1
2
3
4
5 7
6
Produktspecifikationer
| Varumärke: | Extech |
| Kategori: | Multimeter |
| Modell: | FL700 |
Behöver du hjälp?
Om du behöver hjälp med Extech FL700 ställ en fråga nedan och andra användare kommer att svara dig
Multimeter Extech Manualer
23 December 2024
19 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
11 September 2024
6 September 2024
3 September 2024
2 September 2024
Multimeter Manualer
- Monacor
- Rigol
- EMOS
- Rohde & Schwarz
- Vimar
- Wago
- Clas Ohlson
- Perel
- Digitus
- Brandson
- Strex
- Bearware
- Basetech
- Uni-T
- Skandia
Nyaste Multimeter Manualer
17 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
14 Juli 2025
14 Juli 2025
14 Juli 2025
11 Juli 2025