Extech PRC10 Bruksanvisning

Läs nedan 📖 manual på svenska för Extech PRC10 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
USER GUIDE
Current Calibrator
Model PRC10
2 PRC10-EU-EN-V1.2 01.13
Introduction
Thank you for selecting the Extech Model PRC10. This device is shipped fully tested and calibrated
and, with proper use, will provide years of reliable service. Please visit the Extech Instruments
website (www.extech.com) to check for the latest version of this User Guide. Extech Instruments is
an ISO-9001 certified company.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation
Safety Notes
Do not exceed the maximum allowable input range.
Turn the unit OFF when the device is not in use.
Remove the batteries if the device is to be stored for longer than 60 days.
Never dispose of batteries in a fire. Batteries may explode or leak.
Never mix battery types. Always install new batteries of the same type.
Cautions
Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter itself for any damage before operating the
meter. Repair or replace any damage before use.
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
3 PRC10-EU-EN-V1.2 01.13
Meter Description
1. AC adaptor input jack
2. Display
3. Power ON/OFF
4. Source output adjustment arrow buttons
5. Set button
6. Unit button (mA or %)
7. I/O MODE button
8. MEM (memory STEP button)
9. Backlight/ZERO button
10. Test lead inputs
Display Layout
1. SOURCE mode icon
2. ZERO function status icon
3. MEASURE mode icon
4. Loop Power icon
5. Auto Power OFF active icon
6. Battery status icon
7. Measure mode value
8. Measure mode units icon
9. Datalogger memory location
10. Source mode value
11. Source mode units icon
3
4
5
6
7
8
10
9
2
1

Produktspecifikationer

Varumärke: Extech
Kategori: Inte kategoriserad
Modell: PRC10

Behöver du hjälp?

Om du behöver hjälp med Extech PRC10 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Extech Manualer

Extech

Extech CO220 Bruksanvisning

28 September 2024
Extech

Extech 380560 Bruksanvisning

24 September 2024
Extech

Extech 380396 Bruksanvisning

21 September 2024
Extech

Extech HDV600 Bruksanvisning

21 September 2024
Extech

Extech 380395 Bruksanvisning

21 September 2024
Extech

Extech MO57 Bruksanvisning

19 September 2024
Extech

Extech HDV540 Bruksanvisning

17 September 2024
Extech

Extech 380260 Bruksanvisning

17 September 2024
Extech

Extech HD750 Bruksanvisning

13 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer