Extech VB400 Bruksanvisning
Extech
Mätutrustning
VB400
Läs gratis den bruksanvisning för Extech VB400 (6 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om Extech VB400 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
User's Guide
Pen Vibration Meter
Model VB400
VB400-en-GB_v1.2 11/15 2
Introduction
Congratulations on your purchase of the Extech VB400 Meter. The VB400 is designed to provide
easy and accurate velocity and acceleration measurements on industrial machinery. This meter is
shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Features
Applications for industrial vibration monitoring :
All in one pen type digital vibration meter.
Acceleration, Velocity measurement, RMS measurement value.
Metric & Imperial display unit
Frequency range 10 Hz - 1 kHz, sensitivity designed to meet ISO 2954.
High accuracy and easy to read LCD display.
Complete with the test pin and magnetic base.
Low battery indicator.
IP65 protection.
Safety
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
VB400-en-GB_v1.2 11/15 3
Meter Description
1. Display
2. Power Button
3. Hold Button
4. Function Button
5. Battery Cover/Compartment
6. Vibration Sensor
7. Tip Sensing Head
8. Magnetic Base
Display Icons
HOLD HOLD has been activated
ACC Acceleration with units : m/s
2
, ft/s
2
, g
VEL Velocity with units: mm/s, cm /s, inch/s
Low battery
Magnetic base and Tip sensing head
When measuring non-ferrous materials, place the Tip sensing head onto the vibration sensor.
Unscrew the magnetic base from the sensor and screw on the Tip.
When measuring a ferrous surface, place the magnetic base onto the vibration sensor.
Unscrew the tip from the sensor and screw on the magnetic base.
1
2
3
4
5
6
7
8
Produktspecifikationer
| Varumärke: | Extech |
| Kategori: | Mätutrustning |
| Modell: | VB400 |
Behöver du hjälp?
Om du behöver hjälp med Extech VB400 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Extech Manualer
18 Mars 2025
31 Januari 2025
23 Oktober 2024
23 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Mätutrustning Manualer
- H-Tronic
- Pioneer
- SHX
- Omnitronic
- HOZO Design
- Water-i.d.
- Owon
- Amprobe
- Digitus
- Gossen Metrawatt
- Tempo
- Toolland
- Elgato
- KS Tools
- Soehnle
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025