Ferm FWS-125KN Bruksanvisning

Sidor 8 Engels Fräs

Läs bruksanvisningen för Ferm FWS-125KN gratis online eller ladda ner PDF:en. 24 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

Ladda ner PDF (1.8 MB) Specifikationer

0310-16

Overheating

-The ventilation slots are blocked with dirt.Clean with

dry cloth.

-The machine does not start when switched on.Check

the mains lead and the fuse/plug.Take to your Ferm

Dealer for repair

-The motor is defective.Take to your Ferm Dealer.

MAINTAIN TOOLS WITH CARE

Keep the tool clean for better and safer performance.

Store the discs properly in accordance with the maker’s

instructions.

Follow instructions for changing accessories.Inspect tool

and extension cables periodically and if damaged,have

them repaired by a qualified person or authorised service

body.Keep handles free from oil or grease.Keep the venti-

lation slots clean to prevent motor overheating.

Check for damaged parts

Do not use a tool with damaged parts,before further use a

damaged tool must be carefully checked by a qualified per-

son to determine that it will operate properly.Check for

alignment of moving parts,binding or breakage of parts,

mounting and other conditions that may affect its opera-

tion.

A damaged part or guard should be properly repaired by

an authorised service centre,unless indicated otherwise

in the instruction manual.Have defective switches repla-

ced by an authorised service centre.Do not use a tool if

the switch does not turn on and off.

Have your tool repaired by an expert

This appliance is manufactured in accordance with rele-

vant safety standards.Only experts must carry out repai-

ring of electrical appliances,otherwise considerable dan-

ger for the user may result.

Storing tools

When not in use tools should be stored in the dry,out of

reach of children.

ELECTRICAL INFORMATION

This product is complete with a pre-wired mains plug,it is

double insulated in accordance with EN 50144 – no earth

wire is required

If the plug needs replacing follow these instructions.

Wire correctly

The wires in the mains lead are coloured in the following

way:

BLUE -Neutral

BROWN -Live

Securing wires

Secure wires carefully and firmly to the correct terminals.

Secure the mains cable in the plug cord grip firmly.

Fit a 13-amp fuse.If a 13amp (BS1363) plug is used a (BS

1362) ASTA approved 13-amp fuse must be fitted.

Recycle/Dispose of old plug and cable

Prevent inadvertent connection to socket and risk of elec-

tric shock.

ENVIRONMENT

Recycle the packaging according to the identification

marks on it.

At the end of the product or its accessories life please re-

cycle where facilities exist - phone the Helpline for cur-

rent advice on recycling.

Helpline

For any questions relating to operational or safety

matters contact:

Ferm Customer Helpline on: 0115 966 1199

Monday-Friday 8am – 6pm

Saturday 9am – 1 pm

GUARANTEE

The guarantee conditions can be found on the separately

enclosed guarantee card.

We declare under our sole responsibility that this

product is in conformity with the following

standards or standardized documents

EN-50144-1,prEN50144-2-3,

EN-55014-1,EN-55014-2,

EN61000-3-2,EN61000-3-3,

in accordance with the regulations:

98/37/EEC

73/23/EEC

89/336/EEC

from 01-12-2001

GENEMUIDEN NL

W. Kamphof

Quality department

DECLARATION OF CONFORMITY(UK)

Blue

(Neutral)

Green & Yellow

(Earth)

Brown

(Live)

Fuse

(13 Amp)

INSTRUCTIONS FOR USE

FWS-125KN

WALL CHASER

Art.nr. WSM4002

Betygsätt denna manual

Produktspecifikationer

Varumärke:	Ferm
Kategori:	Fräs
Modell:	FWS-125KN

Behöver du hjälp?

Om du behöver hjälp med Ferm FWS-125KN ställ en fråga nedan och andra användare kommer att svara dig

Ferm FWS-125KN Bruksanvisning

Produktspecifikationer

Behöver du hjälp?

Fräs Ferm Manualer

Fräs Manualer

Nyaste Fräs Manualer