Festo DAMH-L8-32-P-1 Bruksanvisning
                    Festo
                    
                    Inte kategoriserad
                    
                    DAMH-L8-32-P-1
                
                                
    Läs gratis den bruksanvisning för Festo DAMH-L8-32-P-1 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9 recensioner. Har du en fråga om Festo DAMH-L8-32-P-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/1
                    
                    
                    
Assembly instructions (Original instructions) 
8070332 
2017-07 
[8070334] 
†‡
Profile mounting 
DAMH-L8-...-P-1 
Festo SE & Co. KG
Ruiter Straße 82 
73734 Esslingen 
Germany 
+49 711 347-0 
www.festo.com 
1. Further applicable documents 
All available documents for the product  www.f
esto.com/pk 
 Operating instructions of the linear actuator 4 
2. Safety
Switch off power supply and compressed air before mounting work. 
Observe further applicable documents. 
Comply with tightening torques ( Table). 
3. Intended use 
Fastening of the linear actuator   to vertical mounting surface. 4
4. Scope of delivery 
18445d_1 
 1  Profile mounting 
2  Fitting bolt 
3  Screw 
(1x)
 (1x)
(1x)
5. Not in scope of delivery
18445d_2 
4  Linear actuator  
DLGF 
5  Screw 
(1x)
(4x)
6. Mounting 
Determine the mounting points ( Further applicable documents). 
18445d_3 
Place the profile 
mounting 1 at the 
determined mounting 
points of the actuator 4. 
18445d_4 
Lightly clamp the profile 
mounting 1 to the 
actuator 4 using the 
fitting bolt 2. 
Mount the profile 
mounting 1 to the 
actuator 4 using the fitting 
bolt 2 and screw 3. 
18445d_5 
Mount profile mounting 1
to the mounting surface 
with four screws 5. 
7. Screw sizes and tightening torques M
A
1)
Information 
Select screws   suitable for the installation situation. 5
DAMH-L8-...-P-1 20 25 32 40
2  Fitting bolt  [Nm]  2.2 5.0 8.5 9.0
3  Screw  M4x25  M5x30  M6x35  M6x40 
[Nm]  2.2 5.0 8.5 9.0
5  Screw   M4 M5 M6 M6
1)
 Tolerances for tightening torques M
A
 without indication of tolerance 
M
A
 . 3 Nm:   ± 10 % 
M
A
 , 3 Nm:   ± 20 % 
4
3
4
5
5
1
2
3
4
1
2
1
Produktspecifikationer
| Varumärke: | Festo | 
| Kategori: | Inte kategoriserad | 
| Modell: | DAMH-L8-32-P-1 | 
Behöver du hjälp?
Om du behöver hjälp med Festo DAMH-L8-32-P-1 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            Inte kategoriserad Manualer
- Belanger
- Bopita
- KED
- Millenium
- Formuler
- Ankarsrum
- Singer
- Omnitronic
- Mauser Sitzkultur
- FeinTech
- Adidas
- OXI Instruments
- Chrome-Q
- Byron
- Ocean Matrix
Nyaste Inte kategoriserad Manualer
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025