Festo EAHF-E24-60-P-S Bruksanvisning
Festo
Inte kategoriserad
EAHF-E24-60-P-S
Läs gratis den bruksanvisning för Festo EAHF-E24-60-P-S (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 10.5 recensioner. Har du en fråga om Festo EAHF-E24-60-P-S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
EAHF-E24-...-P-S
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8203075
2023-12
[8203077]
8203075
Translation of the original instructions
© 2024 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Axis ELGD –
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The profile mounting attaches an axis ELGD to a mounting surface by the basic
profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
Fig. 1: Scope of delivery
1
Profile mounting (2x)
4.2 Not in scope of delivery
2
3
Fig. 2: Not included in the scope of
delivery
2
Axis ELGD (1x)
3
M6 screw (2x)
5 Assembly
Fig. 3: Determine support spacings and mounting points
• Determine the required support spacingsL and the mounting points of the
axis Other applicable documents.è
1
2
A
B
Fig. 4: Positioning profile mountings
• Position the profile mountings[1] at the mounting points.
ÄThe lug[A] lies in the slot[B] of the axis[2].
1
3
2
Fig. 5: Installing profile mountings
1. Select the suitable screws[3] for the installation situation.
2. Press the profile mounting[1] against the axis[2].
ÄThe profile mounting[1] is flush with the axis[2].
3. Fasten the profile mountings[1] on the mounting surface with the screws[3].
Maximum tightening torque:7.6Nm
4. Repeat the mounting steps for all mounting points.
Produktspecifikationer
| Varumärke: | Festo |
| Kategori: | Inte kategoriserad |
| Modell: | EAHF-E24-60-P-S |
Behöver du hjälp?
Om du behöver hjälp med Festo EAHF-E24-60-P-S ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
Inte kategoriserad Manualer
- Ankarsrum
- Gigabyte
- Itho-Daalderop
- Kwantum
- IDIS
- Cambo
- Singer
- Xuma
- GAMO
- Nuna
- Draper
- Axis
- Velbus
- SHX
- On-Stage
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025