Festo EAHT-E9-FB-3D-30 Bruksanvisning
Festo
Inte kategoriserad
EAHT-E9-FB-3D-30
Läs gratis den bruksanvisning för Festo EAHT-E9-FB-3D-30 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 7.5 recensioner. Har du en fråga om Festo EAHT-E9-FB-3D-30 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Assembly instructions (Original instructions)
8079181
2017-09a
[8079183]
†‡
Mounting kit
EAHT-E9-FB-3D-30
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Further applicable documents
All available documents for the product www.festo.com/pk
Observe further applicable documents:
Description of the planar surface gantry 4 and actuator 5
Assembly instructions of profile mounting attachment 6 and
connection kit 7
2. Safety
Switch off power supply before mounting work.
Comply with tightening torques ( Table).
3. Intended use
Mounting of a Z-axis 5 to the Y-axis of the planar surface gantry 4.
4. Additional information
Centring sleeve (B) www.festo.de/catalogue
5. Scope of delivery
2227
6d_1 1 Mounting kit
2 Screw
3 Cylindrical
dowel pin
(1x)
(2x)
(2x)
6. Not in scope of delivery
2227
6d_2 4 Planar surface
gantry
EXCM-30
(1x)
2227
6d_3 5 Z-axis1)
DGSL-8/-10/-12
EGSC-25/-32
2)
EGSK-20/-26
EGSL-35
(1x)
2227
6d_4 6 Profile mounting
attachment
EAHF-L2-25-P
7 Connection kit
EAHT-AE-3D
(1x)
(1x)
7. Mounting
7a. Interface to planar surface gantry 4
4
4
44
22276d_5
Place the mounting kit 1
with cylindrical dowel
pins 3 at slide unit (A)
of the Y-axis of the planar
surface gantry 4.
Tighten the screws 2.
7b. Interfaces of Z axis 5
5
5
55
Mounting components and tightening torques ( Table).
For DGSL-8/-10
22276d_6
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For DGSL-12
22276d_7
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
1 2
1) Mounting components are not included in the scope of delivery of Z-axis 5.
2) In case of EGCS-25/-32 with a stroke of 25, mounting is not possible.
For EGSC-25
22276d_13
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSC-32
22276d_12
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSK-20
22276d_9
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
3)
3) Tolerances for tightening torques MA without specification of tolerance
MA = 1.2 Nm: ± 10 %
MA , 1.2 Nm: ± 20 %
For EGSK-26
22276d_10
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For EGSL-35
22276d_8
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
7c. Interface to connection kit 7
7
7
77
2227
6d_1
1
Observe assembly
instructions for connection
kit 7 ( Further applicable
documents).
8. Screw sizes and tightening torques M
A
3)
EAHT-E9- 2
2
2
22 [Nm]
FB-3D-30 M4x10 2.5
Not in scope of delivery:
Z-axis 5
5
5
55 Centring sleeve (B) (C) Screw ISO 4762 [Nm]
DGSL-8/-10 ZBH-7 (2x) M4x10-8.8 (2x) 2.0
DGSL-12 ZBH-7 (2x) M5x12-8.8 (2x) 3.0
EGSC-25/-32 – – M4x8-8.8 (4x) 2.0
EGSK-20 – – M3x6-8.8 (4x) 1.2
EGSK-26 – – M4x6-8.8 (4x) 2.5
EGSL-35 ZBH-7 (2x) M4x12-8.8 (4x) 2.5
9. Prior to commissioning
Note
Collision!
The mounting kit reduces the available Y-stroke of the planar surface
gantry 4 by 16 mm.
Check Z-axis 5 for collision.
Set the end stops of the Y-axis at the planar surface gantry 4 ( Further
applicable documents).
4
1
3
2
4
3
1
A
7
1
7
1
5
B
C
1
5
B
C
1
5
B
C
2
6
5
1
5
C
6
1
5
C
6
1
5
C
1
5
C
Produktspecifikationer
| Varumärke: | Festo |
| Kategori: | Inte kategoriserad |
| Modell: | EAHT-E9-FB-3D-30 |
Behöver du hjälp?
Om du behöver hjälp med Festo EAHT-E9-FB-3D-30 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
Inte kategoriserad Manualer
- MB Quart
- DivKid
- Crown
- BISWIND
- Electronics International
- Hoshizaki
- EMSA
- Lofrans
- Leotec
- Eversolo
- Cardiostrong
- Sagitter
- QNAP
- Camec
- FXLab
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025