Festo SAMH-S-N8-S-MK Bruksanvisning
                    Festo
                    
                    Inte kategoriserad
                    
                    SAMH-S-N8-S-MK
                
                                
    Läs gratis den bruksanvisning för Festo SAMH-S-N8-S-MK (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Festo SAMH-S-N8-S-MK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/1
                    
                    
                    
Translation of the original instructions
© 2020 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product  www.festo.com/sp.è
Document Product Contents
Instructions Proximity sensors Operating
Instructions Actuator Operating
Tab. 1 
2 Safety
2.1 Safety instructions
– Only assemble the product on components that are in a condition to be safely
operated.
2.2 Intended use
The mounting kit is used for tamper-proof, captive and positive-locking mounting
of specific proximity sensors.
3 Additional information
Accessories and products  www.festo.com/catalogueè
– Mounting kit SAMH-S-N8-...-MK
– Covering SAMH-S-N8-...-SC
– Proximity sensor for mounting kit SAMH-S-N8 -...- MK
– Actuator
4 Product range overview
4.1 Scope of delivery
Mounting kit SAMH-S-N8-...-MK:
1
Covering(1x)
SAMH-S-N8 -...- SC
– can only be dismantled for
destruction
– can be ordered separately
2
Terminal block(1x)
Fig. 1 
4.2 Not in scope of delivery
3
Proximity sensor(1x)
Fig. 2 
5 Assembly
– The mounting kit increases the length of the proximity sensor.
– When using the mounting kit, minimum strokes are required for certain actu-
ators   3 Additional information.è
Fig. 3 
• Mount the proximity sensor  in the sensor slot   1 Applicable documents.3è
Fig. 4 
1. Position terminal block  flush with the proximity sensor .2 3
2.
Tighten the screw[A]. Tightening torque:   0.6 Nm£
Fig. 5 
1. Place covering  on the cable of the proximity sensor .1 3
2. Push covering  over the proximity sensor .1 3
Fig. 6 
• Press the covering  into the terminal block .1 2
Ä
Covering  snaps into place.1
8127946
SAMH-S-N8
Mounting kit
8127946
2020-01b
[8127948]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Produktspecifikationer
| Varumärke: | Festo | 
| Kategori: | Inte kategoriserad | 
| Modell: | SAMH-S-N8-S-MK | 
Behöver du hjälp?
Om du behöver hjälp med Festo SAMH-S-N8-S-MK ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            
                        
                         30 Mars 2025
                        
                    
                                                            Inte kategoriserad Manualer
- Chipolino
- Noveen
- Blaze
- Shindaiwa
- Doona
- Fulgor Milano
- Algo
- Optoma
- Hard Head
- Crimson
- Omega Altise
- Natuzzi
- Advance
- Saki
- BOYA
Nyaste Inte kategoriserad Manualer
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025