Fiilex P360S Bruksanvisning

Läs gratis den bruksanvisning för Fiilex P360S (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8.5 recensioner. Har du en fråga om Fiilex P360S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Safety Instructions
Mode Selection
User Guide
Parts Diagram
• DO NOT look into the light source. Be cautious of the high-intensity beam.
• DO NOT disassemble P360S. This will void the warranty.
• DO NOT install P360S in damp or wet locations.
• DO NOT cover/block the fixture’s air vents.
• Mount the P360S with a safety cable. (A safety cable is not included.)
• Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
P360S
201105A1
1. 4-leaf Barndoor
2. Barndoor Slot
3. Accressory Lock
4. Side Vents
5. Yoke Knobs
6. Accessory Lock Release
7. CCT/HUE Knob
8. Light Control Input Jack
9. Yoke
10. Light Stand Adapter
11. OLED Display
12. Rear Vents
13. Intensity / DMX Knob
14. Light Control Output Jack
15. DC Power Input Jack
16. ON/OFF Button
235 4 111
13
12
6
7
9
8
10
14
15
16
Intensity
CCT
HUE (Magenta/Green)
DMX Control
Turn the Intensity Knob (13) to adjust brightness.
Turn the CCT Knob (7) to adjust color temperature.
Double click the HUE Knob (7) to adjust HUE value.
Double click the DMX Knob (13) to set DMX address (Range: 1 - 510).
1689 Regatta Blvd. Richmond, CA 94804 | (510) 620-5155 | fiilex@fiilex.com www.fiilex.com

Produktspecifikationer

Varumärke: Fiilex
Kategori: Inte kategoriserad
Modell: P360S

Behöver du hjälp?

Om du behöver hjälp med Fiilex P360S ställ en fråga nedan och andra användare kommer att svara dig