Flashforge Finder 3.0 Bruksanvisning
Flashforge
3D-skrivare
Finder 3.0
Läs gratis den bruksanvisning för Flashforge Finder 3.0 (72 sidor) i kategorin 3D-skrivare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Flashforge Finder 3.0 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/72
FlashForge Corporation
Finder User Guide | www.flashforge.com 0086- 0579-82273989
FlashForge Finder 3D Printer
User Guide
Finder User Guide | www.flashforge.com 400-699-1063
2
Content
Content............................................................................................................................ 2
Preface.............................................................................................................................3
Introduction..................................................................................................................... 4
Notice.............................................................................................................................. 5
Chapter 1: 3D Printing Technology.................................................................................8
Chapter 2: About Finder................................................................................................10
2.1 About Your Finder............................................................................................10
Chapter 3: Unpacking....................................................................................................23
Chapter 4: Hardware Assembly.....................................................................................27
4.1 Filament Installation........................................................................................ 27
4.2 Printer Start-up.................................................................................................28
4.3 Loading Filament............................................................................................. 28
4.4 Unloading Filament.........................................................................................30
Chapter 5: Build Plate Leveling.................................................................................... 32
Chapter 6: About Software............................................................................................34
6.1 Software Installation........................................................................................ 34
6.2 Exploring FlashPrint........................................................................................35
Chapter 7: Basic Printing.............................................................................................. 58
7.1 Generate a Gcode.............................................................................................58
7.2 Print Methods...................................................................................................61
Chapter 8 Supports and Service.................................................................................... 72
Finder User Guide | www.flashforge.com 400-699-1063
3
Preface
Note: Each device must be tested before leaving factory. If there are some residues in extruder
or some tiny scratches on the build tape, it is normal and won’t affect the printing quality.
On the completion of this User Guide, thanks all FlashForge engineers and the
FlashForge 3D printer users for their unremitting efforts and sincere assistance.
The FlashForge Finder User Guide is designed for the Finder users to start their
printing journey with FlashForge Finder. Even if you are familiar with earlier
FlashForge machines or 3D printing technology, we still recommend that please read
this guide, as there is lots of important information about the Finder for you to get a
better 3D experience.
For a better and more successful printing experience, you can refer to the following
materials:
(1) Quick Start Guide
Users will find the Quick Start Guide together with the printer accessories. The Quick
Start Guide will help you start your print journey as soon as possible.
(2) Official FlashForge Website:http://www.flashforge.com
The official FlashForge website contains the up-to-date information concerning
FlashForge software, firmware, device maintenance and so on. Users are also able to
get the contact information from there.
Produktspecifikationer
| Varumärke: | Flashforge |
| Kategori: | 3D-skrivare |
| Modell: | Finder 3.0 |
Behöver du hjälp?
Om du behöver hjälp med Flashforge Finder 3.0 ställ en fråga nedan och andra användare kommer att svara dig
3D-skrivare Flashforge Manualer
27 September 2024
21 September 2024
14 September 2024
11 September 2024
11 September 2024
25 Augusti 2024
25 Augusti 2024
24 Augusti 2024
22 Augusti 2024
20 Augusti 2024
3D-skrivare Manualer
- Artillery
- HP
- Easy Threed
- Snapmaker
- PP3DP
- Zortrax
- LulzBot
- Weller
- Dimension
- Raise3D
- Creality
- Anker
- Weistek
- GooVer
- Wanhao
Nyaste 3D-skrivare Manualer
2 Mars 2025
27 Januari 2025
25 Januari 2025
17 Januari 2025
17 Januari 2025
31 December 2025
27 December 2024
27 December 2024
27 December 2024
27 December 2024