Fluke 1AC II Bruksanvisning
Fluke
Inte kategoriserad
1AC II
Läs gratis den bruksanvisning för Fluke 1AC II (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13.5 recensioner. Har du en fråga om Fluke 1AC II eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
PN 686953
March 1998 Rev.1, 9/01
1998-2001 Fluke Corporation. All rights reserved. Printed in U.S.A. Product names are trademarks of their respective companies.
T5-600/T5-1000
Electrical Tester
Service Information
Introduction
This service information sheet provides the following information for the T5-600 and T5-1000 Electrical
Testers (hereafter referred to as "the tester").
• Safety information
• Parts and service information
• Specifications
• Cleaning procedure
• Required equipment
• Performance tests
• Parts and accessories list
• Battery replacement procedure
For operating instructions, refer to the T5-600/T5-1000 Electrical Tester Instruction Sheet.
Safety Information
Warning
To avoid possible electric shock or personal injury, follow these guidelines:
• Do not use the tester if it is damaged or operating abnormally. Protection
may be impaired.
• Before each use:
• Make sure the battery door is closed and latched.
• Inspect the tester and test leads. Look for cracks, missing plastic, exposed
metal, or damaged insulation. Replace damaged test leads before using the
tester.
• Verify the tester’s operation by measuring a known voltage.
• Replace the batteries as soon as the low battery indicator (M) appears.
• Do not use the tester around explosive gas, vapor or dust.
• Do not apply more than the rated voltage, as marked on the tester, between
terminals or between any terminal and earth ground.
• Refer servicing to qualified personnel.
• Use caution when working above 30 V ac rms, 42 V ac peak, or 60 V dc.
• When using the probes, keep your fingers behind the finger guards on the
probes.
• Connect the common test lead before you connect the live test lead.
Disconnect the live test lead first.
• The display will not display hazardous voltages in display hold. The voltage
indicator LED (
) continues to operate.
®
Produktspecifikationer
| Varumärke: | Fluke |
| Kategori: | Inte kategoriserad |
| Modell: | 1AC II |
Behöver du hjälp?
Om du behöver hjälp med Fluke 1AC II ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Fluke Manualer
12 Mars 2025
9 Oktober 2024
7 Oktober 2024
5 Oktober 2024
1 Oktober 2024
29 September 2024
26 September 2024
24 September 2024
23 September 2024
22 September 2024
Inte kategoriserad Manualer
- Bebob
- Ankarsrum
- Summit
- GameDay
- Totolink
- Triangle
- Ergie
- ViewZ
- HeadRush
- Chrome-Q
- Sweex
- Akai
- Werma
- PcDuino
- Pengo
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025