Fluke PAC 91 Bruksanvisning
Fluke
Inte kategoriserad
PAC 91
Läs gratis den bruksanvisning för Fluke PAC 91 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 13 recensioner. Har du en fråga om Fluke PAC 91 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
LIMITED WARRANTY & LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and
workmanship under normal use and service. The warranty period is
one year and begins on the date of shipment. Parts, product repairs
and services are warranted for 90 days. This warranty extends only to
the original buyer or end-user customer of a Fluke authorized reseller,
and does not apply to fuses, disposable batteries or to any product
which, in Fluke's opinion, has been misused, altered, neglected or
damaged by accident or abnormal conditions of operation or handling.
Fluke warrants that software will operate substantially in accordance
with its functional specifications for 90 days and that it has been
properly recorded on non-defective media. Fluke does not warrant that
software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused
products to end-user customers only but have no authority to extend a
greater or different warranty on behalf of Fluke. Warranty support is
available if product is purchased through a Fluke authorized sales outlet
or Buyer has paid the applicable international price. Fluke reserves the
right to invoice Buyer for importation costs of repair/replacement parts
when product purchased in one country is submitted for repair in another
country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the
purchase price, free of charge repair, or replacement of a defective
product which is returned to a Fluke authorized service center within the
warranty period.
To obtain warranty service, contact your nearest Fluke authorized service
center or send the product, with a description of the difficulty, postage and
insurance prepaid (FOB Destination), to the nearest Fluke authorized
service center. Fluke assumes no risk for damage in transit. Following
warranty repair, the product will be returned to Buyer, transportation
prepaid (FOB Destination). If Fluke determines that the failure was
caused by misuse, alteration, accident or abnormal condition of operation
or handling, Fluke will provide an estimate of repair costs and obtain
authorization before commencing the work. Following repair, the product
will be returned to the Buyer transportation prepaid and the Buyer will be
billed for the repair and return transportation charges (FOB Shipping
Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND
IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF
WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY
OTHER THEORY.
Since some countries or states do not allow limitation of the term of an
implied warranty, or exclusion or limitation of incidental or consequential
damages, the limitations and exclusions of this warranty may not apply to
every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court of competent jurisdiction, such holding will not
affect the validity or enforceability of any other provision.
Fluke Corporation Fluke Industrial B.V.
P.O. Box 9090 P.O. Box 90
Everett 7600 AB Almelo
WA 98206-9090 The Netherlands
USA
®
PAC 91
Print Adapter Cable
Instruction Sheet
Introduction
The PAC 91 is an optically isolated serial to parallel
converter / print adapter cable for use with Fluke test
tools that have an optical interface connector.
Specifications
Battery Type: Alkaline 9 volt, NEDA, IEC6LR61
Battery Life: 20 hour operation
Environmental Specifications:
Meet requirements of:
• MIL-T-28800E, Type III, Class 3
• EN 50081-1, Electromagnetic Compatibility
Generic Emission Standard: EN55022 and
EN60555-2
• EN 50082-1, Electromagnetic Compatibility
Generic Immunity Standard: IEC1000-4 -2, -3, -4,
-5
Temperature:
Operating: 0 °C to +50 °C (32 °F to +122 °F)
Non-operating: -40 °C to +70 °C (-40 °F to +158 °F)
Parallel Output: Connector: 25-pole, D-shell, female.
Output: 8-bit parallel
Protocol: Centronix
Signal levels: TTL compatible
Fixed Serial Interface Settings:
9600 Baud, 8 data bits, no parity, 1 stop bit
Handshake: XON / XOFF
June 1996, Rev. 1, 4/10.
© 1996, 2010 Fluke
Corporation.
All rights reserved.
Printed in The
Netherlands.
All product names are trademarks of their respective companies
Produktspecifikationer
| Varumärke: | Fluke |
| Kategori: | Inte kategoriserad |
| Modell: | PAC 91 |
Behöver du hjälp?
Om du behöver hjälp med Fluke PAC 91 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Fluke Manualer
12 Mars 2025
9 Oktober 2024
7 Oktober 2024
5 Oktober 2024
1 Oktober 2024
29 September 2024
26 September 2024
24 September 2024
23 September 2024
22 September 2024
Inte kategoriserad Manualer
- Samlex
- Inglesina
- BMAX
- Ordex
- MuxLab
- Suunto
- Everdure
- Apc
- CYP
- Hasselblad
- Absima
- Aviom
- Jungle Gym
- Jabsco
- Nvidia
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025