Flymo Easicut 420 Bruksanvisning

Flymo Häcksax Easicut 420

Läs gratis den bruksanvisning för Flymo Easicut 420 (80 sidor) i kategorin Häcksax. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 12 recensioner. Har du en fråga om Flymo Easicut 420 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/80

Carton Contents

IMPORTANT !

lease check the contents of the carton are correct

BEFORE

ssembling your new product.

IF ANY PARTS ARE MISSING CONTACT:-

Husqvarna UK Ltd. Customer Service Department direct

Telephone : 0344 844 4558 UK 1800 882 350 ROI Fax : 01325 302530

If not used properly this product can be dangerous! This product can cause serious injury to the

perator and others, the warnings and safety instructions must be followed to ensure reasonable

safety and efficiency in using this product. The operator is responsible for following the warning

nd safety instructions in this manual and on the product.

Explanation of Symbols on your product

Warning.

Read the user instructions carefully to make

ure you understand all the controls and

hat they do.

Remove plug from the mains immediately if

the cable is damaged or cut.

o not expose to rain.

Do not leave the product outdoors while it

is raining.

Always wear eye and hearing protection.

instruction

manual

blade cover

5054534-06

Service Recommendations

1. We strongly recommend that your product is serviced

at least every twelve months, more often in a profes-

sional application.

2. Always use genuine Flymo Spare Parts.

3. Pre-packed spares are available from most Flymo Ap-

proved stockists.

4. Your product is uniquely identified by a silver and

black product rating label

5. If you have a problem with your machine contact your

local Approved Service Centre ensuring you have full

details of your product as described on the product rat-

ing label.

Should it be necessary for work to be carried out by your Serv-

ice Centre, it is important to take your complete machine in-

cluding cable and any extension cables used.

A network of specialist dealers can be found in your local Yel-

low Pages. To obtain service on your product simply tele-

phone or visit your local Service Centre. Should you require

service under the terms of our guarantee the Service Centre

will require proof of purchase.

All of the centres listed stock genuine Flymo Spare Parts.

NOTE: Our Service Repairers act on their own behalf and are

not empowered to commit or legally bind Husqvarna UK Ltd.

in any manner whatsoever.

EC Declaration of Conformity

Handguard

EasiCut 420/EasiCut 450/

EasiCut 500/EasiCut 510

EasiCut 600XT

EasiCut 420/450/500/510

EasiCut 600XT

belt clip

instruction

manual

blade cover

Handguard

belt clip

EasiCut 420/450/500/510

EasiCut 600XT

Safety

usqvarna AB, S-561 82 Huskvarna, Sweden

Declare under our sole responsibility that the product(s);

Designation............................

Hedgetrimmer

Designation of Type(s)...........

EC420, EC450, EC500, EC510, EC600

dentification of Series...........

See Product Rating Label

Year of Construction..............

See Product Rating Label

Conforms to the essential requirements & provisions of the following EC Directives:

2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU

based on the following EU harmonized standards applied:

EN60745-1, EN60745-2-15

The maximum A weighted sound pressure level L

at the workstation, measured according to EN60745-2-15 is

iven in the table.

The maximum hand / arm vibration weighted value a

, measured according to EN60745-2-15, on a sample of the

above product(s) is given in the table

The declared vibration tool value has been measured in accordance with a standard test method and may be used

for comparing one tool with another.

The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning:

The vibration emission during actual use of the power tool can differ from the declared total value depending on the

ways in which the tool is used.

Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the

actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched

off and when it is running idle in addition to the trigger time).

2000/14/EC: The Measured Sound Power L

& Guaranteed Sound Power L

values are according to the tabulated

figures.

Conformity Assessment Procedure............... Annex V

Huskvarna 17/01/2013

P. Lameli

Chief Technical Officer

Keeper of technical documentation

Type

Blade length (cm)

Power (kW)

Measured Sound Power L

(dB(A))

Guaranteed Sound Power L

(dB(A))

Sound Pressure L

(dB(A))

Uncertainty K

(dB(A))

Hand / arm vibration a

(m/s

)

Uncertainty K

(m/s

)

Weight (Kg)

EC420

0.42

2.5

5.56

1.5

2.8

EC450

0.45

106

2.5

5.53

1.5

2.8

EC510

0.50

106

2.5

2.23

1.5

2.9

EC600

0.50

2.5

3.30

1.5

3.0

Original Instructions

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instruc-

tions

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious

njury.

Save all warnings and instructions for future reference.

The term ‘“power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

Keep work area clean and well lit.

Cluttered or

dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

ower tools

create sparks which may ignite the dust or fumes.

Keep children and bystanders away while

operating a power tool.

Distractions can cause

you to lose control.

2) Electrical safety

)

Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adaptor plugs with earthed

(grounded) power tools

Unmodified plugs and

matching outlets will reduce risk of electric shock.

)

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of

electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet

conditions.

ater entering a power tool will

ncrease the risk electric shock.

Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use

Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply

Use of an RCD

reduces the risk of electric shock.

3) Personal safety

Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication

A moment of inattention while

operating power tools may result in serious

personal injury.

Use personal protective equipment. Always

wear eye protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard had, or

hearing protection used for appropriate conditions

will reduce personal injuries.

)

Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool

Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

Remove any adjusting key or wrench before

turning the power tool on

A wrench or a key

left attached to a rotating part of the power tools

may result in personal injury.

)

Do not overreach. Keep proper footing and

balance at all times.

his enables better control

of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes,

ewellery or long hair can be caught in moving

parts.

If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly

used

Use of dust collection can reduce dust-

related hazards.

4) Power tool use and care

Do not force the power tool. Use the correct

power tool for your application

The correct

power tool will do the job better and safer at the

rate for which it was designed.

Do not use the power tool if the switch does

not turn it on and off

Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools

Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are

dangerous in the hands of untrained users.

Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation. If

damaged, have the power tool repaired before

use.

Many accidents are caused by poorly

maintained power tools.

EC500

0.50

104

2.5

5.22

1.5

2.8

0344 844 4558

1800 882 350

Please register your

product warranty on line.

To register your warranty and for all

your parts requirements please visit

www.flymo.com

For all other enquiries

Husqvarna AB

S-561 82

Huskvarna

Sweden

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

of Flymo S.A.

12/15

5054534-06 Easicut 420-450-510-600XT UK.qxp_Layout 2 14/12/2015 13:33 Page 1

Produktspecifikationer

Varumärke:	Flymo
Kategori:	Häcksax
Modell:	Easicut 420
Motoreffekt:	420 W
Produktens färg:	Orange
Strömkälla:	AC
Blade tand avstånd:	16 mm
Bladstorlekt:	420 mm
Typ av blad:	Dubbla blad