Foster F300 97.1,5V.STD Bruksanvisning

Foster Sjunka F300 97.1,5V.STD

Läs gratis den bruksanvisning för Foster F300 97.1,5V.STD (5 sidor) i kategorin Sjunka. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 10.5 recensioner. Har du en fråga om Foster F300 97.1,5V.STD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Foster spa

via M.S. Ottone, 18/20

42041 Brescello (RE) - Italy

tel. +39.0522.687425 - tel. Servizio Assistenza +39.0522.684450

fax +39.0522.686019 - fax Servizio Ricambi +39.0522.962166

e-mail: service@fosterspa.com

www.fosterspa.com

IN CTIONS FOR TION AND I TENANCESTRU INSTALLA MA N

Stainless steel sinks

Istructions for the installation,

use and maintenance of

kitchen stainless steel sinks

Sinks’ material: austenitic stainless steel AISI 304 - 18/10

UNI EN 13310:2004

(kitchen sinks for domestic use, functional features and tests’ methods)

INSTALLATION

Standard and at (3 mm bended) edge

Before making any cut-out on the worktop, we suggest to verify and lay the sink on the

worktop itself and/or on the cabinets in order to verify that the external dimensions of the

bowls are compatible with the cabinets themselves, in order to avoid making cut-outs for

sinks that cannot be installed.

We also recommend to verify the possibility to install taps and other accessories, by

checking the place they need and the place that remains. Also verify the possibility to

accede to the water main tap under the sink, and that the positioning of the siphon is

feasible. To install the sink, one must make a cut-out on the worktop according to the

template included in the packing.

Once the cut-out is made, one must position the gasket around the perimeter of the

hole. Before installing the sink, please position the waste-fitting and overflow pipe (when

present); when available, also the command of the autiomatic waste-fitting must be

installed at this stage. Make

sure that the external edge

of the sink is positioned

upon the gasket, so as to

create a barrier preventing

the infiltration of water

and dirt between sink and

worktop.

'PTUFS

After having positioned the sink on the worktop, fix it by tightening the screws of

the brackets which are provided (the screws must be tightened just enough to have

the brackets clamp down on the worktop).

Afterwards, remove the excess gasket with a

cutter. The taps can be installed before or after

the positioning of the sink.

After having installed the sink, connect the

waste-fitting with the siphon. Check the water-

tightness by closing the basket of the waste-

fitting, open the tap and wait until the water

level reaches the overflow; shut the tap, and

wait several minutes, verifying that the water

does not drain away. Empty the sink.

Flush-mount edge

For a correct installation of the flush-mount sinks, please follow strictly the technical

sheet (template) provided with the sink; only qualified personnel should make the cut-

out, and a computer-operated machine is necessary. It is advisable to accurately clean

the seat for the cut-out, and to insert the gasket which is provided, between the sink and

the worktop, so as to avoid possible water infiltration into the worktop or the cabinets.

The work must be carried out by experienced personnel.

Do not use electric screwdrivers to tighten the brackets.

The tightening torque must not exceed 60 N/cm.

It is advisable to install the flush-mount sinks on hydro

repellent materials, in order to avoid eventual deformations

of the material itself.

Produktspecifikationer

Varumärke:	Foster
Kategori:	Sjunka
Modell:	F300 97.1,5V.STD
Bredd:	970 mm
Djup:	500 mm
Höjd:	250 mm
Förpackningens bredd:	1070 mm
Produktens färg:	Rostfritt stål
bruksanvisning:	Ja
Låddjup:	570 mm
Vikt inkl. förpackning:	8000 g
Installationsfack, bredd:	950 mm
Installationsfack, djup:	480 mm
Typ av diskho:	Toppmonterat handfat
Diskhons form:	Rektangulär
Diskhons material:	Rostfritt stål
Antal diskhoar:	2 hoar
Första diskhons form:	Rektangulär
Första skål mått (BxL):	340 x 400 mm
Första skål djup:	185 mm
Andra diskhons form:	Rektangulär
Andra skålen mått (BxL):	150 x 300 mm
Andra skålen djup:	165 mm
Tappa storlek:	3.5 "
Hål för kran:	Ja
Antal hål för kranar:	1
Diskställ:	Ja
Diskställets placering:	Höger
Faucet ingår:	Nej