Franke KEPWEBQ Bruksanvisning


Läs gratis den bruksanvisning för Franke KEPWEBQ (28 sidor) i kategorin vatten dispenser. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 2 recensioner. Har du en fråga om Franke KEPWEBQ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/28
Installation Instructions
QUASAR Contactless Bottle Filler
Models UV-C LED WATER TREATMENT:
KEPWEBQ
KEP*EBQ Family of Drinking
Fountains/Bottle Filler combo
The Contactless Bottle Filler mounts directly above Versacooler
® I and II
products.
If installed onto a refrigerated cooler, chilled water can be dispensed through
the Bottle Filler. Otherwise, room temperature water will be dispensed.
The Bottle Filler is shipped partially assembled.
On the combo units, the cooler is plumbed and ready to attach to the Bottle
Filler.
When completed, the finished assembly will look like this:
1
OR
1
07/25 | FRANKE 0365865-081 (B)
Whats Included:
Section 1: Getting Started
Rubber
Gasket
Installation
instructions
Quick connect tee
tting
Snap bushings 7/8”
and 1½”
Top Cap
Optional
Versalter III
38” of ¼ OD plastic
tubing with 38” of
sponge tubing
insulation
Quick connect
elbow tting
Quasar Hands-Free
Bottle Filler
3/8” pilot drill and either a step drill bit up to 7/8” diameter that will drill
through SS top or 7/8” diameter punch die (retrot version only)
Electric drill; wrench for punch die
Small tubing cutter for copper tube
1/4“ nut driver
# 2 Phillips screwdriver
#15 torx bit driver
Tools required:
2
07/25 | FRANKE 0365865-081 (B)


Produktspecifikationer

Varumärke: Franke
Kategori: vatten dispenser
Modell: KEPWEBQ

Behöver du hjälp?

Om du behöver hjälp med Franke KEPWEBQ ställ en fråga nedan och andra användare kommer att svara dig