Fredenstein Artistic MIC-PRE Plus Bruksanvisning
Fredenstein
mottagare
Artistic MIC-PRE Plus
Läs gratis den bruksanvisning för Fredenstein Artistic MIC-PRE Plus (6 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 11 recensioner. Har du en fråga om Fredenstein Artistic MIC-PRE Plus eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
Artistic
MIC-PRE Plus
Operating Manual
Fredenstein Artistic Microphone Preamplifier Plus
The Artistic MicPre Plus features a revolutionary tube type distortion circuit. The variable color
control allows to adjust this feature from very subtle to extremely pronounced . In addition the
Color feature is also level dependent in the same way tube gear behaves.
Variable color enables a myriad of new creative possibilities and prevents cold and stale sounds.
Turning the Color knob all the way counter clockwise, the Color LED turns off and the Color
circuit is completely disabled.
Another key component to achieve best performance levels is the OPA2 discrete audio operational
amplifier. As all Fredenstein products, it is not a copy of an older design, but a proprietary design
manufactured in SMT technology. Matched and integrated dual input transistors guarantee vastly
improved specifications compared to older designs. The OPA2, following the tradition of well
known manufactures, is socketed and can be exchanged without tools. The industry standard pin-
out makes it compatible with many manufactures. The sound is further defined by the American-
made steel-core output transformer, which is known for its smooth vintage sound without being
dark or just “mid-rangy”.
A 2 MOhms high impedance direct input is located on the front-panel, it accepts balanced and
unbalanced signals, the rear microphone input is automatically disconnected when a plug is inserted
in the DI connector.
The Artistic MicPre Plus features a maximum gain of 65 dB, a 20 dB Pad, switchable polarity,
selectable input impedance, and Phantom-Power support. The output level is indicated with a SIG
and a +20dB LED.
As all Fredenstein products, the Artistic MicPre Plus is designed by a German-American team and
manufactured in Taiwan.
Installation:
Please power down your rack or box first before inserting the Artistic Pre Plus. The power
requirements are not very demanding at a maximum of +/-50mA. The Artistic Pre Plus should work
in weaker racks as well.
Fredenstein Artistic MicPre Plus Manual V1.0 DEC 17, 2018 Page 1
Fredenstein Artistic Microphone Preamplifier Plus
Overview:
Indicators:
COLOR LED: indicates that the color
circuit is active
Output Peak Level Indicators:
+20 dB
SIG output level greater than
-30 dB
Rotary Controls:
COLOR : Intensity control of the Color
circuit
GAIN : Gain Control, minimum +20 dB
maximum +65 dB
Switches:
POL : reverse Output Polarity when lit
PAD : -20 dB Input Attenuator when lit
LOW Z : 300 Ohm Input Impedance when
lit
P48 : +48 Volt Phantom Power when lit
Connector:
DI : 2 M Ohm high Impedance
balanced or unbalanced TRS
input
Fredenstein Artistic MicPre Plus Manual V1.0 DEC 17, 2018 Page 2
Produktspecifikationer
| Varumärke: | Fredenstein |
| Kategori: | mottagare |
| Modell: | Artistic MIC-PRE Plus |
Behöver du hjälp?
Om du behöver hjälp med Fredenstein Artistic MIC-PRE Plus ställ en fråga nedan och andra användare kommer att svara dig
mottagare Fredenstein Manualer
10 September 2024
22 Augusti 2024
21 Augusti 2024
19 Augusti 2024
3 Augusti 2024
24 Juli 2024
mottagare Manualer
- SIIG
- Cisco
- DLS
- KanexPro
- Omnitronic
- Rockford Fosgate
- Crestron
- A-NeuVideo
- Modelcraft
- Kanto
- Max
- Maxview
- SSL
- Lab Gruppen
- Lectrosonics
Nyaste mottagare Manualer
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025