Frigidaire 5304490728 Bruksanvisning
Frigidaire
kylskåp
5304490728
Läs gratis den bruksanvisning för Frigidaire 5304490728 (3 sidor) i kategorin kylskåp. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4.5 recensioner. Har du en fråga om Frigidaire 5304490728 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
Compression Nut
Brass Nut
Connecting copper
waterline to icemaker
inlet with 90° water
supply adapter
90° Adapter
Ferrule
Compression Nut
Union
Ferrule/Sleeve
Ferrule/Sleeve
Stainless Steel Ice Maker Waterline Kit
5304490728
French
Spanish
Installation
1. Shut off the cold water supply.
2. Connect either end of the stainless steel connector to the water supply valve. Do not overtighten.
3. Connect the other end of the stainless steel connector to the ice maker inlet located on the back of the refrigerator.
5304490728 (March 2022)
IF THE REFRIGERATOR ICE MAKER INLET HAS 1/4" COPPER
TUBE, USE THE 1/4" BRASS COMPRESSION UNION ENCLOSED:
1. Take the nut and sleeve from the end of the compression
union and place the nut, then the sleeve, on the tube from
the refrigerator.
2. Place the tubing squarely into the body of the compression
union, slide the sleeve and nut into position on the threads,
and tighten. Do not overtighten.
3. Remove the nut and sleeve from the other end of the
compression union and discard.
4. Connect the end of the stainless steel connector to the other
end of the brass union. Do not overtighten.
IF THE REFRIGERATOR ICE MAKER INLET HAS A 1/4"
COMPRESSION FITTING, CONNECT THE END OF THE STAINLESS
STEEL CONNECTOR DIRECTLY TO THE REFRIGERATOR FITTING:
1. Coil the excess connector length to allow the refrigerator to
be pulled away from the wall for cleaning.
IMPORTANT: Do not kink the connector. Do not overtighten.
2. Connect the end of the stainless steel connector to the water
supply valve. Do not overtighten.
3. Turn on the cold water supply.
4. Carefully inspect for leaks at all connections.
5. Tighten connections if any leaks are found. Do not
overtighten.
INSTRUCTIONS FOR CONNECTING STAINLESS STEEL WATERLINE TO ICE MAKER INLET WITH
90° WATER SUPPLY ADAPTER
1. Remove brass nut, compression nuts and ferrules from ice maker water supply adapter
and compression union.
2. Apply several turns (clockwise) of thread seal tape to left end of union.
3. Install taped end of union ice maker water supply adapter and tighten.
4. Install stainless steel waterline to other end of union and tighten.
5. Attach ice maker water supply adapter to ice maker inlet valve and tighten.
6. Attach stainless steel waterline to water supply valve and tighten.
7. Turn on water supply and check for leaks: If leaks occur, tighten connection and recheck
for leaks. Do not overtighten.
Icemaker Inlet
Water
Supply Valve
Stainless Steel
Connector
Produktspecifikationer
| Varumärke: | Frigidaire |
| Kategori: | kylskåp |
| Modell: | 5304490728 |
Behöver du hjälp?
Om du behöver hjälp med Frigidaire 5304490728 ställ en fråga nedan och andra användare kommer att svara dig
kylskåp Frigidaire Manualer
5 Oktober 2025
5 Oktober 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
kylskåp Manualer
- Pelgrim
- Medion
- Hansa
- TCL
- Nemco
- Steel Cucine
- SPT
- Miele
- WLA
- Jenn-Air
- Candy
- Dometic
- Smart Brand
- Luxor
- Dunavox
Nyaste kylskåp Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
21 Oktober 2025
21 Oktober 2025
20 Oktober 2025
20 Oktober 2025