FTE Maximal MAX COMBO NET Bruksanvisning

Läs gratis den bruksanvisning för FTE Maximal MAX COMBO NET (188 sidor) i kategorin Digital mottagare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om FTE Maximal MAX COMBO NET eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/188
MAX COMBO NET
USER’S MANUAL
MANUAL DE USUARIO
HANDEILING
MANUAL DE UTILIZAÇÃO
MANUALE D'USO
MAX_COMBO_NET_manual_print REV2.0.pdf 1MAX_COMBO_NET_manual_print REV2.0.pdf 1 31/01/2013 12:51:1831/01/2013 12:51:18
MAX_COMBO_NET_manual_print REV2.0.pdf 2MAX_COMBO_NET_manual_print REV2.0.pdf 2 31/01/2013 12:51:3331/01/2013 12:51:33
MAX COMBO NET
ENGLISH
USER'S MANUAL
MAX_COMBO_NET_manual_print REV2.0.pdf 3MAX_COMBO_NET_manual_print REV2.0.pdf 3 31/01/2013 12:51:3331/01/2013 12:51:33
1
GENERAL SAFETY 2
GENERAL INFORMATION 3
I. UNPACKING
3
II. FEATURES
3
III. REMOTE CONTROL UNIT (RCU)
4
IV. HOW TO SETTING RCU FOR TV
6
V. FRONT PANEL
8
VI. REAR PANEL
9
INSTALLING EQUIPMENT 10
CHANNEL LIST GUIDE 11
MENU GUIDE 13
MAIN PAGE 13
I. CHANNEL MANAGER
13
II. INSTALLATION
15
III. OPTIONS
20
IV. UTILITY
22
V. ACCESSORY
23
PVR Guide 24
TROUBLESHOOTING 31
SPECIFICATIONS 32
BRAND LIST 178
TABLE OF CONTENTS
To disconnect the apparatus from the mains, the plug must be pulled out
from the mains socket, therefore the mains plug shall be readily operable.
MAX_COMBO_NET_manual_print REV2.0.pdf 5MAX_COMBO_NET_manual_print REV2.0.pdf 5 31/01/2013 12:51:3331/01/2013 12:51:33
2
GENERAL SAFETY
Please read the following recommended instructions carefully to avoid the risk of
your physical Injury before the product is operated.
Do not cover the receiver and keep clear space around the receiver for sufficient.
Check the receiver’s operation voltage 90~250V, 50Hz~60Hz, 12V 2.5A Adaptor
Keep liquid away from the receiver.
The receiver shall not be exposed to dripping or splashing and no objects that filled
with liquid shall not be placed on the receiver.
Unplug the receiver from the wall outlet before cleaning.
Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
Do not block the receiver’s ventilation slots which are provided for ventilation and
protection from overheating.
Please maintain the receiver in a free airflow.
Do not allow the receiver to be exposed to hot, cold or humid condition.
Do not use any cable and attachment that are not recommended as these may
damage your equipment.
Please unplug the receiver from the wall outlet and disconnect the cable between
the receiver and the antenna when you will not use it for long time.
Do not remove the cover to reduce the risk of electric shock.
Do not attempt to service the receiver yourself.
Refer all serving to qualified service personnel.
Manual may be updated as new features.
WARNING
MAX_COMBO_NET_manual_print REV2.0.pdf 6MAX_COMBO_NET_manual_print REV2.0.pdf 6 31/01/2013 12:51:3531/01/2013 12:51:35
3
GENERAL INFORMATION
Please ensure that the following items are included with the receiver in your pack-
ing.
1) Remote Control Unit (RCU)
2) Batteries (2EA)
3) CD with user manual
4) 12V 2.5A Adaptor
½Supports MPEG-2, MPEG-4, H.264 and fully DVB compliant
½Satellite & Terrestrial receiver
½2 Slot smart card
½DiSEqC 1.0, 1.1 1.2 and
½Aspect ratio adjustment 4:3 (16/9 crop), 4:3 (16/9 letterbox), 16:9 (4/3 pillar box)
½User friendly OSD and operation
½Total 10,000 Channels Programmable
½Multi-language audio support / Multi-language menu text support
½Favorite channel selections
½Parental Guide and rating control
½EPG(Provider Electronic Program Guide) for On Screen Channel Information
½On-Screen Display with 65,536 Color
½Blind scan(Power Scan) & Powerful EPG
½Zoom Function in Pause
½Dolby Digital Bitstream Out through S/PDIF(Optical)
½Seletable output for 1080p, 1080i, 720p,576p and 576i format
½USB 2.0 Host (Access to HDD, USB memory, Others etc)
½Upgrade Software & Update Channel Database through USB 2.0 Port and RS232
½MP3 File Play by USB 2.0
½PVR Ready via USB
½Recorded file play on PC
½Reservation Recoding by EPG function
½Multimedia file play by USB 2.0
½Home streaming
I. UNPACKING
II. FEATURES
(2012 11 05) manual.indd 7 2012-11-05 8:48:08
MAX_COMBO_NET_manual_print REV2.0.pdf 7MAX_COMBO_NET_manual_print REV2.0.pdf 7 31/01/2013 12:51:3631/01/2013 12:51:36
4
GENERAL INFORMATION
III. REMOTE CONTROL UNIT (RCU)
MAX_COMBO_NET_manual_print REV2.0.pdf 8MAX_COMBO_NET_manual_print REV2.0.pdf 8 31/01/2013 12:51:3731/01/2013 12:51:37
6
GENERAL INFORMATION
IV. HOW TO SETTING RCU FOR TV
4
3
2
5
1
MAX_COMBO_NET_manual_print REV2.0.pdf 10MAX_COMBO_NET_manual_print REV2.0.pdf 10 31/01/2013 12:51:3831/01/2013 12:51:38
7
GENERAL INFORMATION
IV. HOW TO SETTING RCU FOR TV
I. Manual Search
At first, Turn on the TV
1) Press Device LED Key ( STB or TV or VCR or DVD ) + "OK" key at the same time during 2 or 3 seconds.
Then the Device LED Lamp will be on Setting Mode.
2) Find the 3-Digit code of Device in brand list and input 3-Digit code accordingly one by one. - The Device LED
will be twinked ontime one by one also. When you finish inputting 3-Digit, the Device (TV or VCR or DVD) will be
turned off one time.
3) Then click OK to finish setting. (The Device LED will be turned off after twinkling 2 times.)
*NOTE : If you are not able to find the TV code which you are watching currently, please perform the below "Auto
Search". Then RCU will find the proper code automatically and it will work properly.
II. Auto Search (Using Up or Down key)
1) Press Device LED Key ( STB or TV or VCR or DVD ) + "OK" key at the same time during 2 or 3 seconds.
Then the Device LED Lamp will be on Setting Mode.
2) Press Up or Down Key of RCU to find out equivalent device. At the moment of RCU matching to the equiva-
lent device, the device will be turned off.
3) Then click OK to finish setting. (The Device LED will be turned off after twinkling 2 times.)
III. Factory Reset
1) Press TV LED + REC button at the same time during more than 5 seconds.
2) Device LED will be turn off/on "TV DVD VCR STB" 3 times one by one and RCU will go to default mode.
MAX_COMBO_NET_manual_print REV2.0.pdf 11MAX_COMBO_NET_manual_print REV2.0.pdf 11 31/01/2013 12:51:3831/01/2013 12:51:38
9
GENERAL INFORMATION
VI. REAR PANEL
1. AERIAL Connect to Terrestrial antenna cable.
2. LOOP OUT Connect to another STB.
3. SAT IN Connect to Satellite antenna cable.
4. LOOP OUT Connect to another STB.
5. TV SCART Connect to TV SCART cable.
6. HDMI Connect to HDMI jack of TV.
7. RS 232 Connect to personal computer for software upgrade.
8. Ethernet Connect to Lan cable.
9. USB Connect to USB device.
10. OPTICAL Output for connecting to a amplifier.
11. ADAPTOR Connect to Adaptor.
12. POWER BUTTON Turn On/Off.
3
4 8 9
11
56
7
10 12
1
2
MAX_COMBO_NET_manual_print REV2.0.pdf 13MAX_COMBO_NET_manual_print REV2.0.pdf 13 31/01/2013 12:51:3931/01/2013 12:51:39
10
INSTALLING EQUIPMENT
This section explains several ways of connecting the receiver to your existing
TV, VCR and Hi-Fi system.
You can choose one of the following setups that we recommend.
If you have any problem or need help, consult your dealer or service provider.
Please ensure that the following items are included with the receiver in your packing.
I-1. Connecting the receiver to TV with the SCART cable
Connect one end of the SCART cable to the TV SCART socket on the rear panel of the
receiver and the other end to a SCART socket on the TV.
I. CONNECTING THE RECEIVER TO TV
(2012 11 05) manual.indd 14 2012-11-05  8:48:10
MAX_COMBO_NET_manual_print REV2.0.pdf 14MAX_COMBO_NET_manual_print REV2.0.pdf 14 31/01/2013 12:51:3931/01/2013 12:51:39
11
CHANNEL LIST GUIDE
1. Normal Live Mode
a) When you select one channel, information bar appears
automatically on the screen for few seconds. This bar
provides you the current channel information.
b)Press INFO button to see the information during normal
live mode.
2. Simple Channel List
a) Press OK on the normal live mode to go to the channel
list.
b)When detail channel list is displayed on screen press
RED button to go to simple channel list.
3. Detail Channel List
a) Press OK on the normal live mode to go to the channel
list.
b)When simple channel list is displayed on screen press
RED button to go to detail channel list.
c) Press and to sort by Alphabet.
d)Press SAT button to sort by Satellite and FAV
button for Favorite 1~8.
e) Press GREEN button to return to All Channel or EXIT to
return to the current live channel.
f)Press the SAT key to show Satellite Pop-UP Window then
select satellite. Channel list of selected satellite will be
displayed.
g) Press the FAV key to show Favorite Pop-UP Window then
select FAV list. Channel list of selected FAV will be dis-
played.
h)Press the Green key then all searched channel list will
be displayed.
MAX_COMBO_NET_manual_print REV2.0.pdf 15MAX_COMBO_NET_manual_print REV2.0.pdf 15 31/01/2013 12:51:3931/01/2013 12:51:39
12
CHANNEL LIST GUIDE
4.EPG (Electronic Program Guide)
a) Press EPG button on the live mode.
b)EPG of the current channel appears on the screen.
c) Select the channel that you want to watch program.
d)It will be appear like rightside picture.
5. ZOOM IN/OUT
a) By pressing ZOOM key in a normal live mode, you
can use Zoom In/Out fuction.
b)You can select zoom size with RED/GREEN key.
c) You can select the start position with   key.
d)After select Zoom size and pisition, you can start
zoom function with OK key.
e) With   key, you can move zooming screen.
MAX_COMBO_NET_manual_print REV2.0.pdf 16MAX_COMBO_NET_manual_print REV2.0.pdf 16 31/01/2013 12:51:4031/01/2013 12:51:40
13
MAIN PAGE
MENU GUIDE
I. CHANNEL MANAGER
Press the MENU button on the RCU to open Main
Page on the screen. Main Page will be displayed.
1. You can move into the main page using  
on the RCU.
2. Press OK to confirm your selection.
3. Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
I. Channel Manager
II. Installations
III. Options
This section may help you to organize channels according to your preference.
1. Select Channel Manager in the Main Page with  and press OK.
2. TV Channel Manager Page displays on the screen.
3. Select the mode that you want using .
4. To see the channel that you choose, go to the channel and then press RED botton.
5. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
I-1. Favorite
I-2. Rename
I-3. Move
I-4. Lock
I-5. Delete
I-1. Favorite
1. Using go to the Favorite mode then press
YELLOW button to choose Favorite 1~8.
2. Press OK on the channel that you want to add
or delete.
3. will be marked at the end of selected channel
name bar. To delete press OK again.
4. Selected channels will be automatically saved.
5. If you want to check the saved Favorite Channel List
go to other mode(Rename~Delete) except Favorite
and then press FAV button to check Favorite 1~8.
6. Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
7. Press BLUE button to rename Favorite.
IV. Utility
V. Accessory
MAX_COMBO_NET_manual_print REV2.0.pdf 17MAX_COMBO_NET_manual_print REV2.0.pdf 17 31/01/2013 12:51:4031/01/2013 12:51:40
14
I. CHANNEL MANAGER
MENU GUIDE
I-2. Rename
1. Using

go to the Rename mode.
2. Select the channel that you want to rename using

and
then press OK.
3. Keypad Dialog displays on the screen.
4. Edit the name entering NUMBERS and / or WORDS in the
Keypad Dialog.
5. Press EXIT to return to the previous menu or press MENU to
go to the current live channel.
I-3. Move
1. Using

go to the Move mode.
2. Select channels which you want to move by pressing OK key.
3. Move cursor that you want to place on than press GREEN but-
ton.
4. Press EXIT to return to the previous menu or press MENU to
go to the current live channel.
I-4. Lock
1. Using

go to the Lock mode.
2. Select the channel that you want to lock and then press OK.
will be marked at the end of the selected channel name bar.
To delete press OK again.
3. Press EXIT to go to Main Page or press MENU to go to the
current live channel.
I-5. Delete
1. Using

go to the Delete mode.
2. Select the channel that you want to delete and then press OK.
will be marked on the selected channel number.
To delete press Blue button again.
3. Press YELLOW button to delete TP. Select one channel and
press Blue button.
All channels of that TP will be automatically selected.
4. Press YELLOW button to delete Satellite. Select one channel
and press Blue button. All channels of that the Satellite will
be automatically selected.
5. Press EXIT to return to the previous menu or press MENU to
go to the current live channel.
6. Message Box displays on the screen.
7. Select OK on the Message Box and then press OK to delete
the markedchannels.
MAX_COMBO_NET_manual_print REV2.0.pdf 18MAX_COMBO_NET_manual_print REV2.0.pdf 18 31/01/2013 12:51:4031/01/2013 12:51:40
15
MENU GUIDE
This section may help you to set up antenna and
scan satellite or transponder, etc. Select Installations
in Main Page using

and press OK.
Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
II-1. Satellite Search
II-2. DiSEqC Switch
II-3. Motor Setup
II-4. Terrestrial Search
II-5. Home Streaming
II-6. Factory Default
II-1 Satellite Search
1.You can move the cursor using  and press OK
when you select the value that you want.
a) Satellite
- Press OK to display the Satellite List Box.
- Select the proper Satellite and then press OK.
b) DiSEqC
- Press OK to display the DiSEqC Port List.
- Select the proper DiSEqC port and then press OK.
c) LNB
- Press OK to display the LNB Frequency List.
- Select the proper LNB Frequency and then
press OK.
- You can also input directly the numbers using
NUMBER KEY on the RCU.
d) 22KHz Tone
- Select the one among None, 0 KHz or 22 KHz
depending on the user’s antenna switch box.
e) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then
press OK.
II. INSTALLATION
f) Search
- Press Search to start scan channels.
- SAT Rename : To rename SAT, Press the
Green button on the RCU.
TP EDIT : To Edit TP, Press the RED
button on the RCU.
MAX_COMBO_NET_manual_print REV2.0.pdf 19MAX_COMBO_NET_manual_print REV2.0.pdf 19 31/01/2013 12:51:4031/01/2013 12:51:40
18
MENU GUIDE
II. INSTALLATION
II-5. Home Streaming
1. PC setting
***Execute 'Home Streaming' program.
a) Go to ‘Preference’ Tab.
b) Select ‘Default URL’ check-box and assign the down-
load folder by using “Browse” button It is assigned to
“c:\download” but must specify the destination folder
personally to be able to receive movie files in PC.
Note: Only default server available currently.
2. STB setting
a) Go to Home streaming menu ( Menu Accessory
Network Home streaming ) and Click Home
Streaming.
b) IP-Name Edit Pad will appear & Input Server IP by
numeric buttons of RCU.
c) The IP address must be same as IP address shown in
preference tap of Home Streaming program.
II-4. Terrestrial Search
1. Select Channel Search in Installation using

and press OK.
2. 1) Select the region where you are using .
2) You can select searching type which you want among
Auto and Manual using.
3) Auto
a) Select ‘Search’on the Screen and pres OK button to scan
channels.
b)Press Exit or Menu after finishing scanning.
4)Manual
a) Select Mux Channel which you want using .
b) Frequency will be displayed automatically according to
selected Mux Channel.
MAX_COMBO_NET_manual_print REV2.0.pdf 22MAX_COMBO_NET_manual_print REV2.0.pdf 22 31/01/2013 12:51:4231/01/2013 12:51:42
19
MENU GUIDE
II-6. Factory Default
Use Factory Default function only when you want
to return the receiver to the condition of factory
default. All settings and channels will be deleted.
1. Select Factory Default in Installations using  and press
OK.
2. Message box displays on the screen.
3. Select OK to return the receiver to the condition of factory
default and then press OK.
4. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
II. INSTALLATION
3. Playing the Movie File by Home Streaming
a) Press “Fn” key of RCU in normal view of STB and then the
movie file list in PC will be appeared in TV Screen.
b) Select the file which you want to see by using navigation
keys of RCU and press “OK” buttons to play the movie file.
Please see the right picture for better
understanding.
MAX_COMBO_NET_manual_print REV2.0.pdf 23MAX_COMBO_NET_manual_print REV2.0.pdf 23 31/01/2013 12:51:4231/01/2013 12:51:42
22
MENU GUIDE
IV
. UTILITY
This section may help you to use USB, etc.
Select Utility in Main Page using ̵̷ and press OK.
½IV -1. System Information
½IV -2. Timer
½IV -3. Calendar
IV
-1.
System Information
This option help you to know the current S/W and
H/W version. Also provides you the product name.
1. Select System Information in Options using ̵̷and
pres OK.
2. Press EXIT to return to the previous menu.
IV
-2.
Timer
T
Use ▲▼ buttons to move to Calendar and press OK
button. Will appear calendar on screen Use ◀▶▲▼
buttons to move between dates in a month or / buttons
to go previous or next Month.
Press Exit buttons to exit.
he Unit(Set top box) will be turned off/on automatically
after a specified time
IV
-3.
Calendar
(2012 11 05) manual.indd 26 2012-11-05  8:48:16
MAX_COMBO_NET_manual_print REV2.0.pdf 26MAX_COMBO_NET_manual_print REV2.0.pdf 26 31/01/2013 12:51:4331/01/2013 12:51:43
23
ME NU GUIDE
V
. ACCESSORY
This section may help you to use USB, etc.
Select Utility in Main Page using and press OK.
·
V -1. USB
·
V - 2. Smart Card
·
V - 3. Network / Videoclub
V-1 USB
The receiver is equipped with host.
1. Select USB in Utility with and press OK.
2. If you want to save Sofware or Database, press Green
button on the R CU.
3. S elect the file which you want to s ave us ing and OK
button.
4. After downloading the selected file, the receiver will
reboot automatically.
V- 2 Smart Card
The receiver is equipped with two slots of various Smart Card
which have access to the scrambled the pay per view services.
The programs that can be descrambled are determined by the
smart card that you use.
1. Select Smart Card in ACCESSORY menu with and press OK.
2. Insert Smart Card into Slot 1 or 2, then STB displays
Smart card name on the screen.
4. Press EXIT to return to the previous menu or press MENU to
go to current live channel.
V- 3 Network / Videoclub
This menu support multiple functions such as below:
1. SW downloading by Web.
2. Home-Streaming.
3. Youtube.
4. VideoClub.
5. RSS feed / Twitter / Weather information.
6. Downloading channel Data.
MAX_COMBO_NET_manual_print REV2.0.pdf 27MAX_COMBO_NET_manual_print REV2.0.pdf 27 31/01/2013 12:51:4331/01/2013 12:51:43
24
PVR GUIDE
PVR GUIDE
This section may help you how to use PVR function on
this STB.
I.
Recommended Devices
If you want to use PVR function, you need to prepare
equipment as below.
- External USB Hard Disk Drive.
- Flash memory stick
- Format Type: FAT16/32 (System does not support NTFS
and other file system)
II. Record Function
II-1 Reserved Recording
1. Time Reserved Recording
: Set desired recording time- in “Utility Timer” to
record at set time.
NOTE : How to set up before you startTime Record”
- STB set up in default.
- Please change “OFF” to “Recording” in Active menu.
- Once you set “Recording” in Active menu, you will see
the detail menu for PVR. ( Cycle, Channel Type, Channel
name, Start Time, Duration).
- Press the “Ok” button to select Channel Name.
2. EPG Reserved Recording
: Used to record a selected event from EPG.
- Press the EPG button to go into EPG menu while watch-
ing a program on screen.
- To select event play on time: Move from the EPG to
select the event and press the “RECORD button” on RCU.
- If you want cancellation, press more “RECORD button”
once.
- If you want several reserved recording, move and press
the “RECORD button” on RCU.
MAX_COMBO_NET_manual_print REV2.0.pdf 28MAX_COMBO_NET_manual_print REV2.0.pdf 28 31/01/2013 12:51:4431/01/2013 12:51:44
25
PVR GUIDE
PVR GUIDE
II. Record Function
II-2 Instant Recording
- Press “RECORD button” on RCU to start recoding program.
- While Recoding program
- Press “PAUSE” key to execute “Time Shift”
- You can use “LEFT/RIGHT button” to view desired time while
recoding program.
- Press “OK button” on RCU to display Recording file list
During Recording you can watch also other channels which
are located in same TP. In case of watching other channels
during recording, You should come back to the recording
channels in channel list to stop recording.
- If you press “STOP button” on RCU, current program you are
watching will stop and Live TV will be stored in USB memory
space.
MAX_COMBO_NET_manual_print REV2.0.pdf 29MAX_COMBO_NET_manual_print REV2.0.pdf 29 31/01/2013 12:51:4431/01/2013 12:51:44
26
PVR GUIDE
PVR GUIDE
III. Playback Function
- To play previously recorded program, press “Play button”on
RCU.
- Use the arrow buttons to select the file which you want to
play and press “OK button” to play.
- While Playing program.
- If you press “LEFT/RIGHT button” on RCU button while
recoding live TV or recorded file play, current program you
ware watching will stop and picture will re-restart from
where it was moved by “LEFT/RIGHT button” on RCU.
IV. Trick Mode Function
- If you want to play other recorded file during Playback,
press “Play” button.
- If you press “FF(Fast Forward) button” during Timeshift or
Playback, the file will be played at 2X speed and if you press
the “FF button” one more time, the file will be played to 8X
speed.
- If you press the “REW(Rewind) button” during Timeshift or
Playback, the file will rewind at 2X speed and if you press
the “REW button” one more time, the file will rewind to 8x
speed.
- FF/REW function will back to normal play if you press "PLAY
button”.
MAX_COMBO_NET_manual_print REV2.0.pdf 30MAX_COMBO_NET_manual_print REV2.0.pdf 30 31/01/2013 12:51:4531/01/2013 12:51:45
27
PVR GUIDE
PVR GUIDE
V. Time Shift Function
- If you want to execute “Time Shift” in Live mode You should
set “On” of Time Shift In PVR Option (Accessory
˧
PVR
˧
TimeShift “ON”).
- To star Time Shift in Live mode, press “PAUSE” to start.
- Time shift will played during 30 minutes in Live Mode.
- To start “Play back” during Timeshift press “PLAY” key.
- You can move “play position” using LEFT/RIGHT button dur-
ing Time Shift.
VI. Format
- You can do FAT32 Format the HDD formatted by FAT32 and
NTFS also.
- You can do Format also the multi partitioned HDD.
- When NTFS formatted HDD is inserted, POPUP message
will appear.
- Press “OK” button to move to “C:, D:, E:, F: NEXT°” in case
of Multi partitioned HDD.
- In case of NTFS multi partitioned HDD, you must format by
FAT 32.
MAX_COMBO_NET_manual_print REV2.0.pdf 31MAX_COMBO_NET_manual_print REV2.0.pdf 31 31/01/2013 12:51:4531/01/2013 12:51:45
28
PVR GUIDE
PVR GUIDE
VII. MP3 Play
- Select MP3 file which you want to play in USB menu.
- After you select MP3 file, MP3 play window will be executed.
VIII. JPG View
- Select JPG file which you want to see in USB menu.
- Press OK to see the JPG which you want to.
- You can rotate the image by using LEFT/RIGHT button.
IX. Software Upgrade
- Select * UAD file which you want to upgrade in USB menu.
MAX_COMBO_NET_manual_print REV2.0.pdf 32MAX_COMBO_NET_manual_print REV2.0.pdf 32 31/01/2013 12:51:4631/01/2013 12:51:46
30
PVR GUIDE
PVR GUIDE
X-3 How to Convert the file by Divx Manager
A) Play Divx Manager.
1) Setting
Model
Rapsody RSH-250/350
B) Select the folder where the file that you want to convert is.
Then the file's information will appear.
C) And select the file which you want to convert and select
“Convert”.
D) Select “Encoding Start”

It starts “Converting”.
NOTE: Web site for downloading
1. Kmplayer
1) Enter this site : http://2bwithu.tistory.com/245.
2) Download 2 files to 1 folder and unzip the archived file.
After unzip, you can install only click exe file.
2. Divx Manger
1) Enter this site :
http://www.modix4u.co.kr/upboard/view.asp?fcprimkey=44
2) Click below for English version.
MAX_COMBO_NET_manual_print REV2.0.pdf 34MAX_COMBO_NET_manual_print REV2.0.pdf 34 31/01/2013 12:51:4631/01/2013 12:51:46
29
PVR GUIDE
PVR GUIDE
X. How to play the record by PVR of 'HD-XXX' in
PC or Divx Player
X-1 How to play in PC
A) Play KM Player.
B) Select Language.
1) Click right button of Mouse Language your lan-
guage.
C) Change the extension name of the recorded file to
*.mpg”.
Example : Welcome to A_131821 Welcome to
A_131821.mpg
D) Select the file which you want to play.
1) Click right button of Mouse Open Files(S) Select.
X-2 How to Play in “Divx Player”
A) The file format must be changed to “.avi” format to play in
DivX Player.
B) Select a destination folder where to be saved the file which
will be changed to *.avi.
1) Click right button of Mouse
Capture
Select Capture
Folder.
C) Repeat A)
B)
C)
D) of No.1 how to play in PC.
D) Capture the fie which is being played currently to convert
into *.avi.
1) Click right button of Mouse
Capture
Video Quick
Capture.
2) Then the playing file is saved in designated folder by *.avi
format.
E) If the playing file is STB SD channel, it is saved by SD and If
the file is HD or H.264 it saved by HD or H.264. If user does
not have DivX player which can play HD or H.264 (at least
CPU sigma8634), he must convert the file SD so that the
general SD DivX player (CPU sigma8511) can play the file.
MAX_COMBO_NET_manual_print REV2.0.pdf 35MAX_COMBO_NET_manual_print REV2.0.pdf 35 31/01/2013 12:51:4731/01/2013 12:51:47
33
SPECIFICATIONS
Item
HDMI HD Video/Audio Output
TV SCART Output RGB, CVBS, L, R Output with Volume control
SPDIF Dolby Digital Bitstream Out (Optical)
- RS-232, Bit Rate : 115,200baud
Data Interface Connector : 9-pin D-sub Male type
- USB : USB 2.0, Type A Connector
- Ethernet : 10/100Mbps, DHCP Supporting
Specification

. A/V & Date In/Out
Item
Input Voltage AC 90V ~ 250V, 50Hz ~ 60Hz
Power 12V 2.5A Adaptor
Specification

. Power Supply
Item
Size(WxHxD) 230mm x 40mm x162mm
Weight 1.4 KG
Specification

. Physical Specification
Item
Operating Temperature 0 °C ~ 40 °C
Storage Temperature -10 °C ~ 50 °C
Operating Humidity Range 10~85% RH, Non-condensing
Storage Humidity Range 5~90% RH, Non-condensing
Specification

. Environmental Condition
Item
Transport Stream 13818-1 MPEG-2, H.264/AVC Transport stream Specification
Profile Level MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Input Rate Max. 90Mbit/s
Aspect Ratio 4:3, 16:9, Letter Box
Frame Rate 25Hz for PAL, 30Hz for NTSC
Video Resolution 576i, 576p, 720p, 1080i
Teletext Through VBI
Audio Decoding MPEG-1 Layer 1 & 2, Dolby Downmix
Audio Mode Single Channel/Dual Channel Joint Stereo/Stereo
Frequency Response 20~20kHz, <+/-2dB or 60Hz ~ 18kHz <+/- 0.5dB
Sampling Rate 32, 44.1, 48KHz
Specification
. MPEG Transport Stream & A/V Decoding
MAX_COMBO_NET_manual_print REV2.0.pdf 37MAX_COMBO_NET_manual_print REV2.0.pdf 37 31/01/2013 12:51:4731/01/2013 12:51:47
MAX_COMBO_NET_manual_print REV2.0.pdf 38MAX_COMBO_NET_manual_print REV2.0.pdf 38 31/01/2013 12:51:4831/01/2013 12:51:48
MAX COMBO NET
ESPAÑOL
MANUAL DE USUARIO
MAX_COMBO_NET_manual_print REV2.0.pdf 39MAX_COMBO_NET_manual_print REV2.0.pdf 39 31/01/2013 12:51:4831/01/2013 12:51:48
MAX_COMBO_NET_manual_print REV2.0.pdf 40MAX_COMBO_NET_manual_print REV2.0.pdf 40 31/01/2013 12:51:4831/01/2013 12:51:48
37
SEGURIDAD GENERAL 38
INFORMACIÓN GENERAL 39
I. DESEMBALAJE
39
II. CARACTERISTICAS
39
III. MANDO A DISTANCIA(RCU)
40
IV. COMO CONFIGURAR EL MANDO A DISTANCIA CON LA TV
42
V. PANEL FRONTAL
44
VI. PANEL TRASERO
45
INSTALACIÓN DEL EQUIPO 46
GUÍA LISTA DE CANALES 47
GUÍA MENÚ 49
MENÚ PRINCIPAL 49
I . GESTOR DE CANALES
49
I I. INSTALACIÓN
51
III. OPCIONES
56
IV. UTILIDAD
58
V. ACCESORIOS
59
PVR Guide 60
SOLUCIÓN DE PROBLEMAS 67
ESPECIFICACIONES 68
Lista de Marca 178
INDICE
Para desconectar el receptor, la toma de corriente debe ser retirada del
enchufe principal.
MAX_COMBO_NET_manual_print REV2.0.pdf 41MAX_COMBO_NET_manual_print REV2.0.pdf 41 31/01/2013 12:51:4831/01/2013 12:51:48
39
INFORMACIÓN GENERAL
Por favor, asegurarse de que los siguientes articulos están incluidos con el receptor.
1) Mando a distancia (RCU)
2) Pilas (2EA)
3) CD con manual de usuario
4) 12V 2.5A Adaptor
½Soporta MPEG-2, MPEG-4, H.264 y toda la Norma DVB
½Receptor Digital HD Combo (Satelite y Terrestre)
½2 Lectores de Tarjetas
½DiSEqC 1.0, 1.1 1.2 y
½Ajuste de aspecto 4:3 (16/9 crop), 4:3 (16/9 letterbox), 16:9 (4/3 pillar box)
½OSD de fácil de manejo
½10.000 canales programables
½Soporta Audio Multi-lenguaje / Soporta Menu Multi-lenguaje
½Lista de favoritos
½Control paterno
½EPG (Guia Electronica de Programas) en pantalla
½Visualización en pantalla con 65.536 colores
½Búsqueda ciega y Potente EPG
½Función Zoom en Pausa
½Dolby Digital Bitstream a través de S / PDIF (óptico)
½Salida seleccionable 1080p, 1080i, 720p, 576p y 576i
½Puerto USB 2.0 (Acceso al disco duro, memoria USB, otros etc...)
½Actualización de software y lista de canales a través del puerto USB 2.0 y RS232
½Reproduce archivos de audio via USB 2.0
½Funciones PVR via USB
½Reproducir ficheros grabados en el ordenador
½Programar una grabación a traves de EPG
½Reproduce archivos de video via USB 2.0
½Home streaming
I.DESEMBALAJE
II. CARATERISTICAS
(2012 11 05) manual.indd 43 2012-11-05 8:48:23
MAX_COMBO_NET_manual_print REV2.0.pdf 43MAX_COMBO_NET_manual_print REV2.0.pdf 43 31/01/2013 12:51:4831/01/2013 12:51:48
40
INFORMACIÓN GENERAL
III MANDO A DISTANCIA (RCU)
MAX_COMBO_NET_manual_print REV2.0.pdf 44MAX_COMBO_NET_manual_print REV2.0.pdf 44 31/01/2013 12:51:4831/01/2013 12:51:48
41
INFORMACIÓN GENERAL
III MANDO A DISTANCIA (RCU)
1. POWER Conmuta al receptor entre operativo y en modo stand by.
2. MUTE Habilita o deshabilita el audio.
3. TV Modo de TV.
4. DVD Modo de DVD.
5. VCR Modo de VCR.
6. STB Modo de STB.
7. TV / RADIO Conmuta entre canales de TV y Radio.
8. RECALL Selecciona el canal que estabamos viendo anteriormente.
9. AV / TV Selecciona el modo TV ó Radio.
10. ˥PR Selecciona el canal que estabamos viendo anteriormente.
11. Fn Administrador de archivos de red / Resetear.
12. V. Format Cambia a Tipo HD.
13. ZOOM Selecciona la opción ZOOM IN/OUT.
14. Fn2 Reservado.
15. Mueve abajo una página en la lista de canales.
16. Mueve arriba un página en la lista de canales (Selecciona el zoom in/out).
17. V+ / V- Sintoniza el volume arriba o abajo.
18. P+ / P- Cambia canales arriba o abajo en el modo normal de canales.
19. ̵̷ Cambia canales o mueve las opciones en el menú
20. ඔඖ Ajusta el volumen ó mueve para la izda. Y dcha. en las del menú.
21. MENU Muestra el menú principal en la pantalla.
22. EXIT Regresa al menu anterior ó a la vista del modo normal desde un menú.
23. INFO Muestra la caja de información del progarama en la pantalla y editar el nombre de
lista de canal favorito.
24. STOP Para la grabación ó la reproducción.
25. PLAY Visualiza la lista de ficheros y reproduce a velocidad normal.
26. PAUSE Hacer Pausa en la imagen ó volver a imagen norma.
27. RECORD Grabar los programas.
28. REWIND Se usa para rebobinar.
29. F / F Se usa para avanzar rápidamente.
30. AUDIO Change the audio languages.
31. E
Subtitles
Teletext
PG Display the TV or Radio program guide.
32. Habilita el modo subtitulos.
33. Habilita el modo teletexto.
34. Numeric buttons Seleccionar canales de TV o Radio y menú individual.
35. FAV Cambia la lista de favoritos seleccionados.
36. SAT Cambia a la lista de satélites seleccionados.
MAX_COMBO_NET_manual_print REV2.0.pdf 45MAX_COMBO_NET_manual_print REV2.0.pdf 45 31/01/2013 12:51:4831/01/2013 12:51:48
42
INFORMACIÓN GENERAL
IV. COMO CONFIGURAR EL MANDO A DISTANCIA A LA TV
4
3
2
5
1
MAX_COMBO_NET_manual_print REV2.0.pdf 46MAX_COMBO_NET_manual_print REV2.0.pdf 46 31/01/2013 12:51:4931/01/2013 12:51:49
I. Búsqueda manual
En primer lugar, encienda su televisor.
1) Pulse el botón ( STB o TV o VCR o DVD ) + "OK" al mismo tiempo durante 2 o 3 segundos. La luz del botón
seleccionado se quedara fija y entrará en modo de programación.
2) Encuentre el código de 3 dígitos en el listado por marcas e insértelo uno a uno. Cuando finalice de introducir
los 3 dígitos, si es el correcto, el dispositivo (TV o VCR o DVD) se apagará.
3) A continuación pulse OK para grabar la configuración. (La luz del botón seleccionado parpadeara dos veces).
*NOTA: Si no son capaces de encontrar el código de TV que es usando actualmente, por favor, realice lo siguiente.
"Búsqueda Autotica". El RCU encontrará el código automáticamente y trabajará correctamente.
II. Búsqueda automática (Usando teclas de canal arriba y canal abajo, CH+ y CH-).
1) Pulse el bon ( STB o TV o VCR o DVD ) + "OK" al mismo tiempo durante 2 o 3 segundos. La luz del botón
seleccionado se quedara fija y entrará en modo de programación.
2) Presiona CH+ o CH- en el mando para encontrar un dispositivo equivalente. En el momento que el RCU
encuentre el código correcto, el dispositivo (TV o VCR o DVD se apagará).
3) A continuación pulse OK para grabar la configuración. (La luz del botón seleccionado parpadeara dos veces).
III. Reseteo de fábrica
1) Pulse Botón TV + REC al mismo tiempo durante más de 5 segundos.
2) El botón seleccionado se apagará y se encenderá "TV, DVD, VCR STB" 3 veces uno a uno y el RCU volverá al
modo por defecto.
43
INFORMACIÓN GENERAL
IV. COMO CONFIGURAR EL MANDO A DISTANCIA A LA TV
MAX_COMBO_NET_manual_print REV2.0.pdf 47MAX_COMBO_NET_manual_print REV2.0.pdf 47 31/01/2013 12:51:4931/01/2013 12:51:49
44
INFORMACIÓN GENERAL
V. PANEL FRONTAL
Nota: No todas las “memorias USB 2.0” son compatibles con nuestro producto.
1. POWER Conmuta el receptor entre encendido y Standby.
2.
LECTOR DE TARJETAS Insertar Tarjeta.
3.
USB Conectar al Puerto USB.
3
489
11
56
7
10 12
1
2
1 2 3
MAX_COMBO_NET_manual_print REV2.0.pdf 48MAX_COMBO_NET_manual_print REV2.0.pdf 48 31/01/2013 12:51:4931/01/2013 12:51:49
45
INFORMACIÓN GENERAL
VI. PANEL TRASERO
1. AERIAL Conectar al cable de antena Terrestre.
2. LOOP OUT Conectar a otro STB (receptor).
3. SAT IN Conectar al cable de antenna de Satélite.
4. LOOP OUT Conectar a otro STB (receptor).
5. TV SCART Conectar al cable EUROCONECTOR TV.
6. HDMI Conectar a la entrada HDMI del TV.
7. RS 232 Conectar al ordenador personal para actualizaciones de software.
8. Ethernet Conectar al cable LAN.
9. USB Conectar al Puerto USB.
10. OPTICA Salida para conectar a un amplificador.
11. ADAPTOR Conectar el adaptador.
12. BOTÓN DE ALIMENTACIÓN Encendido / Apagado.
3
4 8 9
11
56
7
10 12
1
2
MAX_COMBO_NET_manual_print REV2.0.pdf 49MAX_COMBO_NET_manual_print REV2.0.pdf 49 31/01/2013 12:51:4931/01/2013 12:51:49
46
INSTALACIÓN DEL EQUIPO
Esta sección explica varias maneras de conectar el receptor a tu TV, VCR
y sistema HI-FI.
Se puede elegir una de las siguientes configuraciones que recomendamos.
Si tiene algún problema ó necesita ayuda, consulte a su distribidor ó punto de venta.
Por favor comprobar que los siguientes articulos están incluidos con el receptor en su caja.
I-1.Conectar el receptor al TV con cable euroconector
Conectar un extremo del cable euroconector al conector TV SCART del panel trasero
del receptor y el otro extremo al conector SCART del TV.
I. CONECTAR EL RECEPTOR AL TV CON CABLE EUROCONECTOR
MAX_COMBO_NET_manual_print REV2.0.pdf 50MAX_COMBO_NET_manual_print REV2.0.pdf 50 31/01/2013 12:51:4931/01/2013 12:51:49
49
MENÚ PRINCIPAL
GUÍA MENÚ
Presionar la tecla MENU del mando a distancia para abrir la
pantalla de la página principal La página principal será
mostrado.
1. Puede moverse dentro del menú principal presionando
 del mando a distancia.
2. Presionar OK para confirmar la selección.
3. Presionar EXIT ó MENÚ para volver al menú anterior.
I. Gestor de Canales
II. Instalación
III. Opciones
Esta sección ayuda a organizar canales acorde a las preferencia.
1. Seleccionar Gestor de Canales en el menú principal con y presionar OK.
2. Aparacerá en la pantalla la página de gestor de canales T.
3. Seleccionar el modo que se quiere uilizar .
4. Para ver el canal que se quiere elegir, ir al canal y presionar la tecla ROJA.
5. Presionar EXIT para volver al menú anterior ó presionar MENU para ir al canal actual que se estaba viendo.
I-1. Favorito
I-2. Renombrar
I-3.Mover
I-4. Bloquear
I-5. Borrar
I-1. Favorito
1. Utilizando las teclas ir al modo favorito y
presionar la tecla AMARILLA para elegir entre
Favorito 1....8.
2. Presionar OK en el canal que se quiere añadir ó borra.
3. Una marca aparecerá al final del nombre del canal
seleccionado. Para borrar presionar OK otra vez.
4. Los canales seleccionados serán memorizados
automáticamente.
5. Si se quiere comprobar la Lista de Favoritos
memorizada ir al otro modo (Renombrar-Borrar)
excepto Favoritos y presionar la tecla FAV para
comprobar Favoritos 1…8.
6. Presionar EXIT para volver al menu anterior ó presionar MENU
para volver al canal actual que se estaba viendo.
7. Presionar la tecla AZUL para renombrar Favorito.
IV. Utility
V. Accessory
I. Gestor de Canales
MAX_COMBO_NET_manual_print REV2.0.pdf 53MAX_COMBO_NET_manual_print REV2.0.pdf 53 31/01/2013 12:51:5031/01/2013 12:51:50
51
GUÍA MENÚ
Esta sección ayuda a configurar la antena y buscar satélite
ó transpondedores, etc…Seleccionar instalación en el
menú principal y presionar OK. Presionar EXIT para ir al
menú principal ó presionar MENU para volver al
canal actual que se estaba viendo.
II-1.
Satélite
Buscar
II-2. Conmutador DiSEqC
II-3. Configuración de Motor
II-4. Terrestre Buscar
II-5. Home Streaming
II-6. Configuración de Fábrica
II-1 Satélite Buscar
1. Se puede mover el cursor utilizando  presionando
Ok, cunado se seleccione el valor deseado.
a) Satélite
- Presionar OK para visualizar la lista de satélites.
- Seleccionar el satélite deseado y presionar OK.
b) DiSEqC
- Presionar OK para visualizar la lista de los puertos de
DiSEqC.
- Seleccionar el DiSEqC deseado y presionar OK.
c)
LNB
- Presionar OK para visualizar la lista de
frecuencias de LNB.
- Selecionar el LNB deseado y presionar OK.
- Se puede también introducir directamente los números uti-
lizando el teclado numérico en el mando a distancia.
d)
22KHz ToneTono 22KHz
- Seleccionar entre Ninguno, 0 KHz ó 22 KHz
dependiendo de la conmutación de antena.
e)
Opción Búsqueda
- Presionar OK para visualizar la lista de Opciones de
Búsqued.
- Selecionar la opción Búsqueda deseada y presionar OK.
f)
Buscar
- Presionar Buscar para empezar la búsqueda de canales.
- Renombrar SAT: Para renombrar un SAT, presionar la tecla
Verde en el mando a distancia.
II. INSTALACIÓN
Editar : Para Editar un TP, presionar
la tecla ROJA en el mando a
distancia.
MAX_COMBO_NET_manual_print REV2.0.pdf 55MAX_COMBO_NET_manual_print REV2.0.pdf 55 31/01/2013 12:51:5131/01/2013 12:51:51
52
GUÍA MENÚ
II-2. Conmutador DiSEqC
1. Selecionar buscar canales en el modo de instalación
utilizando ̵̷ y presionar OK.
a)Si se presionar DiSEqC Switch y presionar OK en el
menu y aparecerá la página de Conmutación de DiSEqC
en la pantalla.
b)Selecionar el puerto de DiSEqC (A~D) de satélite
deseado utilizando y ඔඖ̵̷y precionar BUSCAR. Se
buscará el satélite deseado automáticamente.
II-3 Conficuración del Motor
1.Se puede mover el cursor utilizando ̵̷ y presionar OK
cuando se seleciona el valor deseado.
a)Tipo de Motor : DiSEqC 1.2, GOTO-X
- Presionar OK para visualizar el Tipo de Motor.
- Seleccionar el Tipo de Motor deseado y presionar OK.
b) Satélite
- Presionar OK para visualizar la lista de Satélites.
- Seleccionar el satélite deseasdo y presionar OK.
c)Conmutación y LNB
- Presionar OK para visualizar la lista de las Frecuencias y
Configuración de Conmutación
-Seleccionar LNB & Conmutación desado.
d)Frecuencia
- Presionar OK para visualizar la lista de las Frecuencias.
- Seleccionar frecuencia deseada y presionar OK.
e)Movimiento de Motor
- Buscar la posición apropiada del satélite seleccionandoඔඖ.
II. INSTALACIÓN
(2012 11 05) manual.indd 56 2012-11-05  8:48:30
MAX_COMBO_NET_manual_print REV2.0.pdf 56MAX_COMBO_NET_manual_print REV2.0.pdf 56 31/01/2013 12:51:5131/01/2013 12:51:51
53
II. INSTALACIÓN
GUÍA MENÚ
f) Control de Motor
Seleccionar la posición utilizando y presionar OK.
Aparecerá en la pantalla una caja de mensaje.
- Memorizar la Posición del motor para el satélite
seleccionado.
- Ir a Posición Satélite : Mover el motor a la posición memorizada
del satélite seleccionado.
- Ir al centro: Ir al centro del motor.
- Limit off: Eliminar los límites Este y Oeste.
- Configurar Límite Este: Configurar la actual posición
como Límite Este.
- Configurar Límite Oeste: Configurar la actual posición
como Límite Oeste.
- Recalcular Posición.
-
Resetear Posición : Resetea todas la posiciones
memorizadas del motor
g) Posición de satélite
- Introducir directamente la posición utilizando el
teclado NUMÉRICO en el mando a distancia.
- Seleccionar la dirección utilizando ( Oeste /
Este).
h) Opción Búsqueda
- Presionar OK para visualizar la lista de Busqueda de
canales.
- Presionar la Opción de Búsqueda que se quiera y
presionar OK.
i) Buscar
- Presionar Buscar para empezar la búsqueda de
canales.
- Presionar OK para empezar la búsqueda.
2. Editar la posición local
- Presionar el teclado VERDE para editar la posición local.
a) Longitud
- Introducir directamente la longitud utilizando el teclado numérico del mando.
- Seleccionar la dirección utilizando (Oeste/Este).
b) Latitud
- Introducir directamente la latitud utilizando el teclado numérico del mando.
- Seleccionar la dirección (Norte/Sur).
3. Presionar EXIT para regresar al menú anterior ó presionar MENU para ir al canal que se
estaba viendo.
TP EDIT : Para Editar TP, presionar el
teclado ROJA en el mando a
distancia.
MAX_COMBO_NET_manual_print REV2.0.pdf 57MAX_COMBO_NET_manual_print REV2.0.pdf 57 31/01/2013 12:51:5231/01/2013 12:51:52
54
GUÍA MENÚ
II. INSTALACIÓN
II-5. Home Streaming
1. Ajustes del PC
***Ejecutar el programa “home streaming”.
a) Ir a ‘Preference”.
b) Seleccionar ‘Default URL’ y asignar la carpeta del PC
usando la tecla “Browse” Por defecto está asignada la
carpeta C:\download, pero debe especificar la carpeta
de destino para poder recibir archivos de película en su
PC.
Nota: solo está disponible el servidor por defecto.
2. Ajustes del STB
a) Ir a Home streaming menu ( Menu Accesorios red
Home streaming ) y click Home streaming.
b) Aparece ventana para editar el nombre de la IP & el
servidor de entrada IP con las teclas numéricas del
mando a distancia.
c) La dirección IP deberá ser igual a la IP de la carpeta
preference en el programa home streaming.
II-4. Terrestre Buscar
1. Seleccionar Buscar Canales en Instalación usando
 y presionar OK
2. 1) Seleccionar la region desde donde se quiere hacer la
búsqueda.
2) Se puede seleccionar el tipo de búsqueda entre Auto y
Manual usando.
3) Auto
a) Seleccionar “Buscar” en el pantalla y presionar la tecla
OK para buscar canales.
b) Presionar Exit ó Menú al termino de la búsqueda.
4) Manual
a) Seleccionar el Canal Mux el cual se quiere buscar
utilizando .
b) La Frecuencia será visualizada automáticamente según
el Canal Mux seleccionado.
MAX_COMBO_NET_manual_print REV2.0.pdf 58MAX_COMBO_NET_manual_print REV2.0.pdf 58 31/01/2013 12:51:5231/01/2013 12:51:52

Produktspecifikationer

Varumärke: FTE Maximal
Kategori: Digital mottagare
Modell: MAX COMBO NET

Behöver du hjälp?

Om du behöver hjälp med FTE Maximal MAX COMBO NET ställ en fråga nedan och andra användare kommer att svara dig