G-Technology CM01 Bruksanvisning
G-Technology
Gräsklippare
CM01
Läs gratis den bruksanvisning för G-Technology CM01 (20 sidor) i kategorin Gräsklippare. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om G-Technology CM01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
Safety and Instruction Manual for
CM01 Cordless Cylinder Mower
IMPORTANT:
READ ALL INSTRUCTIONS
BEFORE USE.
RETAIN INSTRUCTIONS FOR FUTURE
REFERENCE.
WARNING:
THIS PRODUCT CAN CAUSE SERIOUS
INJURIES.
Read all instructions. Failure to follow
all instructions listed below may result in
electric shock, re and/or serious injury.
The term “power tool” in all of the warnings
listed below refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
WARNING:
When using any electrical appliance,
basic safety precautions should always be
observed, including the following, to reduce
the risk of re, electrical shock, or injury.
Work area:
•Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
•Mow only in daylight or good articial light
•Thoroughly inspect the area where
the mower is to be used and move any
object which may jam or be thrown by the
machine.
•Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust and fumes.
•Keep children, bystanders, and pets
away while operating the power tool,
distractions can cause you to lose control.
•Not to be used as a toy. Not to be used
near children.
•Never allow children or people unfamiliar
with these instructions to use the power
tool. Local regulations may restrict the age
of the operator.
•When not in use store the power tool out
of the reach of children.
•Always be sure of your footing on slopes,
do not over-reach or use on excessively
steep slopes.
•Mow across the face of slopes, never up
and down.
•Take extreme caution when changing
direction on slopes.
•Avoid operating the mower in wet grass
where possible.
Electrical safety:
•Power tool plugs must match the outlet.
Never modify the plug in any way.
•Do not use any adaptor plugs with
earthed (grounded) power tools.
Unmodied plugs and matching outlets
will reduce the risk of electric shock.
•Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
•Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
•Do not abuse the charger cord. Never
use the charger cord for carrying the
charger, or pulling and unplugging the
power tool. To disconnect the charger
from an outlet grasp the plug and pull to
disconnect. Damaged or entangled cords
increase the risk of electric shock.
•Keep charger cord away from heat, oil,
sharp edges or moving parts.
•When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
•If the cord becomes damaged during use
disconnect the cord from the power supply
immediately- do not touch the cable
before disconnecting.
•Before use check the power supply and
charger cables for signs of damage or
ageing.
•When charging or operating the power
tool it is recommended that the appliance
Important Safeguards
Produktspecifikationer
| Varumärke: | G-Technology |
| Kategori: | Gräsklippare |
| Modell: | CM01 |
Behöver du hjälp?
Om du behöver hjälp med G-Technology CM01 ställ en fråga nedan och andra användare kommer att svara dig
Gräsklippare G-Technology Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Gräsklippare Manualer
- Qualcast
- Powerblade
- IKRA
- Mac Allister
- Bosch
- Kibani
- Atco
- MacAllister
- Snapper
- LawnMaster
- Valera
- Hikoki
- Gardol
- Flymo
- Craftfull
Nyaste Gräsklippare Manualer
5 April 2025
2 April 2025
1 April 2025
1 April 2025
31 Mars 2025
29 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025
13 Mars 2025