GAO EMW100D Bruksanvisning
GAO
Inte kategoriserad
EMW100D
Läs gratis den bruksanvisning för GAO EMW100D (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 8 recensioner. Har du en fråga om GAO EMW100D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
English
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Ver. 201103
Extra Receiver with Dimmer
Art.no. 18-2039 Model EMW100D-UK
36-2347 EMW100D
Please read theentire instruction manual before use and save
it for future reference. Wereserve theright for any errors in text
or images and for making any necessary technical changes to
this document. Ifyou should have any questions concerning
technical problems please contact our Customer Services.
Product description
• Remote control socket receiver with dimmer function.
• Range up to 70 metres if unobstructed.
• A red LED on thereceiver comes on when it has been
turned on by thetransmitter. TheLED goes off when
thereceiver is turned off.
• The programmed channel is permanently saved in
thememory.
• Dimmer function memory. Thereceiver retains thelight
intensity setting for thenext time thereceiver is turned on.
Functions
Programming
1. Connectthereceiver to awall socket.
2. Press[ON/OFF/Dimmer/Learning code] twice in quick
succession until theLED on thereceiver starts flashing.
3. Holdin [OFF] on thetransmitter for 2 seconds (until theLED
on thereceiver goes off) for thechannel you wish to use on
thereceiver. If[OFF] is released too early, theprogramming
will not work.
Note: Do not press thebuttons on thetransmitter too hard; light
pressure (just enough to light up theLED on thetransmitter) is all
that is needed. Ifyou press too hard theprogramming will not work.
Operation
• Press [ON] or [OFF] on thetransmitter to turn thedevice
plugged into thereceiver’s socket on or off.
• Press [ON/OFF/Dimmer/Learning Code] on thereceiver to
turn thedevice plugged into thereceiver’s socket on or off.
Dimmer switch
• Press and hold in [ON] on thetransmitter to increase
thelight intensity. Releasethebutton when thedesired
lightlevel has been reached.
• Press and hold in [OFF] to decrease thelight intensity. Release
thebutton when thedesired light level has beenreached.
• The light intensity can also be adjusted by holding in [ON/OFF/
Dimmer/Learning Code] on thereceiver. Thelight intensity will
increase and decrease alternatively. Releasethebutton when
thedesired light level has been reached.
• When thelight intensity has been programmed, thereceiver
will remember thesetting even when it has been switched
off using the[OFF] button. Thememory will, however, be
erased if thereceiver is unplugged from thewall socket.
Connection
• Set thepower switch of theelectrical device that is to be
connected to thereceiver to . OFF
• Connect theelectrical device to thereceiver before it is
connected to apower point.
• Turn thedevice on by setting its power switch to / .ON I
Safety
• Only connect electrical devices rated for thevoltage
specified below.
• Never use thedimmer function on appliances that are
not designed for use with adimmer switch. Onlyuse
thedimmer function with dimmable light bulbs such as
incandescent filament bulbs, etc.
Disposal
Follow local ordinances when disposing of this product. Ifyou
are unsure how to proceed, contact your local authority.
Specifications
Voltage 230 V AC, 50 Hz, 16 A
Max power 50–300 W (incandescent bulbs)
Protection class IP20
Frequency 433.92 MHz
Range Up to 70 metres (unobstructed)
Note:
• Other wireless equipment using thesame frequency can
reduce thetransmission range.
• The range of all wireless equipment depends on
thetype of obstacles located between thetransmitter
and thereceiver (e.g. aconcrete wall will interfere with
thesignal more than aplasterboard wall).
If you experience problems, try thefollowing:
• Turn off any existing wireless equipment to see if that
could be causing theproblem.
• Move thewireless equipment and/or shorten
thedistance and reduce thenumber of obstacles (walls,
furniture, etc) between thetransmitter and receiver.
1. [ON/OFF/Dimmer/Learning Code]
• Press once to switch between
ON OFF and .
• Press twice to enter
theprogramming mode.
• Press and hold in to start
thedimmer function
adjustmentmode.
2. LED
• The LED flashes: The receiver
isready for programming.
• The LED shines steadily:
Thereceiver is switched . ON
• The LED is off: The receiver
isswitched .OFF
1 2
Produktspecifikationer
| Varumärke: | GAO |
| Kategori: | Inte kategoriserad |
| Modell: | EMW100D |
Behöver du hjälp?
Om du behöver hjälp med GAO EMW100D ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad GAO Manualer
29 Augusti 2024
28 Augusti 2024
26 Augusti 2024
26 Augusti 2024
Inte kategoriserad Manualer
- Allnet
- Watson
- Synamodec
- Aruba
- Netis
- Tower
- Nebula
- HPI Racing
- Pro-Lift
- Advantix
- Sera
- DEXP
- Verbos Electronics
- Fimer
- Axxess
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025