GARDE 181BASE1PSMA Bruksanvisning

GARDE ej kategoriserat 181BASE1PSMA

Läs gratis den bruksanvisning för GARDE 181BASE1PSMA (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5 recensioner. Har du en fråga om GARDE 181BASE1PSMA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
08/2023
IT IS RECOMMENDED THE KNIFE AND GEAR ARE
REPLACED AT THE SAME TIME FOR OPTIMAL PERFORMANCE.
1. Insert the can opener into the base. The base will be
needed for leverage while removing the gear.
2. Use a at head screwdriver to hold the gear in place by
jamming the head of the screw driver into the teeth of the
old gear. You will need to apply enough pressure to hold
the gear in place.
counter clockwise. You should feel the tension in the
spring ease up and the gear will come loose after a few
turns.
4. Remove the old gear and keep the washer. Insert the
new gear with the washer on top. Turn the handle clock-
wise until the handle connects to the shaft below the gear.
The spring should be tense now and the can opener is
ready to use.
(181CO1GEARMA)
REPLACING THE GEAR
1. Using either a Phillips or at head screw driver to remove
the 2 screws that connect the knife to the opener.
2. Remove and discard the old knife while keeping the
knife support plate.
3. Position the new knife in line with the holes and place the
support plate on top of the knife.
4. Use the screwdriver to tighten the screws.
(181CO1KNIFMA)
REPLACING THE KNIFE
The can openers surface should be cleaned regularly using
a food safe sanitizer.
Recommendation:
Noble Chemicals QuikSan Sanitizer and Disinfectant (147QUIKSAN)
Use a toothbrush-style brush to ensure you are able to reach
the crevices around the knife.
Recommendation:
Scrubble Products 7¼ Utility Brush Stainless Steel Bristles (27140675)
After cleaning, apply a food safe oil to the gear to keep it
turning smoothly.
Recommendation:
Petrol-Gel Food Grade Sanitary Lubricant - 4 oz. Tube (401PETROGEL)
CLEANING / MAINTENANCE
USE CAUTION WHEN CLEANING
ITEM NUMBER DESCRIPTION
181BASE1PSMA Plated Steel Base
181COM1KITMA Knife & Gear Kit
181CO1GEARMA Gear
181BASE1SSMA Stainless Steel Base
181COM1SUPMA Knife Support
181CO1WASHMA Washer
181CO1KNIFMA Knife
181CO1SCRWMA Screw Set
These parts can be purchased from the same location as the can opener.
REPLACEMENT PARTS
1. Position the can you are opening on the counter on top of
the base with the lip of the can touching the can opener.
2. Line up the knife on the inside lip of the can. With the
handle upright, punch down so the knife punctures the
cans lid.
3. Push the handle down so it is parallel with the counter
and begin turning the handle to open the can.
4. Once the lid is separated, safely remove it from the can.
Avoid touching the sharp edges of the lid created while
opening the can.
5. Pull the can opener up and move the can away from the
opener.
USING YOUR NEW CAN OPENER
The Garde Heavy-Duty #10 Can Opener is made of durable
cast iron construction with a rust-resistant coating. It can be
used to open cans of all sizes, including #10 cans.
ABOUT
Please read and comply with the instructions listed on this document. To get the
best service life and performance from your machine, clean it thoroughly before
and after each use by following the instructions listed below. Minimize the use of
alkaline cleaners as they may dull the nish and cause pitting.
181COM1BSSMA - Stainless Steel Base
181COM1BSTMA - Plated Steel Base
181COM1NBMA - No Base
MODELS
HEAVY DUTY #10 CAN OPENERS
QUICK START GU


Produktspecifikationer

Varumärke: GARDE
Kategori: ej kategoriserat
Modell: 181BASE1PSMA

Behöver du hjälp?

Om du behöver hjälp med GARDE 181BASE1PSMA ställ en fråga nedan och andra användare kommer att svara dig




ej kategoriserat GARDE Manualer

ej kategoriserat Manualer

Nyaste ej kategoriserat Manualer