GARDE 181ONSLC316 Bruksanvisning
GARDE
Skärmaskin
181ONSLC316
Läs gratis den bruksanvisning för GARDE 181ONSLC316 (4 sidor) i kategorin Skärmaskin. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om GARDE 181ONSLC316 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
USER MANUAL
1/4”
Item #181ONSLIC14
3/16”
Item #181ONSLC316
07/2020
Onion Slicers
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades. When not in use, use the ring pin to secure the machine in the lockdown posion.
Operation
1) Remove ring pin from lockdown posion hole and place in the hole on the handle.
2) Use the handle to raise the push plate to the upright posion.
3) Carefully place produce on the blade surface. Make sure the produce isn’t larger than the blade surface.
a. Note: For proper funconality and slice size make sure the two appropriate blade cartridges are set
on top of one another.
4) Make sure hands/ngers are clear of the cung area.
5) With one rm, swi moon bring the handle down unl the push plate pushes the produce completely
through the blade cartridges.
Cleaning and Maintenance
1) To remove pusher assembly, remove the ring pin and use the handle to li the pusher assembly o of the
guide rods.
2) Carefully remove both blade assemblies from the main frame one at a me
3) Thoroughly clean the frame, blade assemblies, and pusher assembly.
4) Dry all components then replace the blade assembly, pusher assembly, and ring pin.
5) If necessary lubricate the guide rods with food grade mineral oil. Do NOT use cooking or vegetable oil.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
3/16” Blade Set
#181ONBLD316
1/4” Blade Set
#181ONBLD14
3/16” Pusher Plate
#181ONPUSH316
1/4” Pusher Plate
#181ONPUSH14
Chain Pin Assembly
#181CHAINPIN
Non-Skid Foot
#181NSKIDFEET
Replacement Parts
USER MANUAL
Bushing
#181BUSHING2
Bumper
#181BUMPER2
Produktspecifikationer
| Varumärke: | GARDE |
| Kategori: | Skärmaskin |
| Modell: | 181ONSLC316 |
Behöver du hjälp?
Om du behöver hjälp med GARDE 181ONSLC316 ställ en fråga nedan och andra användare kommer att svara dig
Skärmaskin GARDE Manualer
9 September 2024
8 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
Skärmaskin Manualer
- Siemens
- Bron-Coucke
- Russell Hobbs
- Ozito
- Proline
- Clas Ohlson
- Brother
- Hobart
- Ferm
- Primo
- Dremel
- Ovela
- Avantco
- Fagor
- Vox
Nyaste Skärmaskin Manualer
27 Mars 2025
27 Mars 2025
18 Februari 2025
13 Februari 2025
10 Februari 2025
8 Februari 2025
1 Februari 2025
31 Januari 2025
7 Januari 2025
6 Januari 2025