Garmin GHC 10 Bruksanvisning

Läs bruksanvisningen för Garmin GHC 10 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 31 gånger. Fråga om modellen? Ställ en fråga

Printing a Mounting Template

NOTICE

These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the

template and an incorrect cutout (too large or too small) on the mounting surface of your boat.

To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and

width measurements are indicated on the template.

The paper size must be larger than the dimensions of the template. Select the paper size using the button in the Adobe Acrobat print Properties

dialog box.

Select to ensure the template prints in the correct orientation.Auto-Rotate and Center

IMPORTANT:Page Scaling When printing the ush mount template, set in the Adobe Acrobat print dialog box to .None

Page Scaling:

Select :None

Auto-Rotate and Center:

Select with a check mark

for correct orientation

Properties: Select

the paper size.

Paper size (example):

Use appropriate size paper.

NOTICE

After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the

correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any

damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.

Betygsätt denna manual

Produktspecifikationer

Om du behöver hjälp med Garmin GHC 10 ställ en fråga nedan och andra användare kommer att svara dig