GBC Pinnacle 27 Bruksanvisning
GBC
Lamineringssystem
Pinnacle 27
Läs gratis den bruksanvisning för GBC Pinnacle 27 (44 sidor) i kategorin Lamineringssystem. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 11.5 recensioner. Har du en fråga om GBC Pinnacle 27 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/44
Pinnacle 27/27 EZload
Laminator
INSTALLATION & OPERATION MANUAL
Document Number: CBT10000 Rev B
Do not duplicate without written
permission
from ACCO
Brands
ACCO Brands reserves the right to make changes to this publication and to the products described in it without
notice. All specifications and information concerning products are subject to change without notice. Reference
in this publication to information or products protected by copyright or patent does not convey any license
under the rights of ACCO Brands or others assumes no liability arising from infringements of patents or any
other rights of third parties.
This publication is copyrighted © 2016 by ACCO Brands. All rights reserved.
1. Safety
YOUR SAFETY, AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO GBC. IN THIS INSTRUCTION
MANUAL AND ON THE PRODUCT ARE IMPORTANT
SAFETY MESSAGES. BEFORE YOU INSTALL OR USE
THE MACHINE, READ AND FOLLOW ALL THE SAFETY
NOTICES CAREFULLY IN THIS CHAPTER.
Observe all the safety information provided.
Observe all safety warnings. Never remove safety
warnings or other information from the equipment.
Read all of the instructions and save these
instructions for further use.
The safety alert symbol precedes each safety
notice in this manual. The symbol indicates a
potential personal safety hazard to you or others, as
well as cause product damage or property damage.
This safety alert symbol indicates a potential
electrical shock. It warns you not to open the paper
cutter and expose yourself to hazardous voltage.
THE FOLLOWING WARNINGS ARE FOUND ON THE
ULTIMA 65 LAMINATOR.
This means you can be seariously hurt or killed if you
open the product and expose yourself to hazardous
voltage.
Do not open. No user servicable parts insides. Refer
servicing to qualitfied service personal.
CAUTION Hot Surface: Laminator
rollers can be in excess of 260° Fahrenheit.
Please use caution and do not touch the rollers.
Caution Moving Parts: Laminator
rollers are moving parts, please keep body parts
away from the rollers as they can be trapped
and/or crushed in rollers. Clothing, Jewelry, Long
hair and other wearables could be caught in roller
path and pull you into the
Caution Sharp Point: The laminator
trimmer has a sharp blade. Do not touch the
blade portion of the trimmer and use caution
when operating to prevent injury.
WARNING: Do not attempt to service or
repair the laminator.
WARNING: do not connect the laminator
to an electrical supply or attempt to operate the
laminator until you have completely read these
instructions. Maintain these instructions in a
convenient location for future reference.
General safeguards
• Use this laminator only for its intended
purposes as according to the
specifications outlined in the operating
instructions.
• Keep hands, long hair, loose clothing and
articles such as necklaces or ties away
from the front of the rollers to avoid
entanglement and entrapment.
• Avoid contact with the rollers during
operation or shortly after the laminator
has been turned off. The rollers can
reach temperatures in excess of 300ºF.
Produktspecifikationer
| Varumärke: | GBC |
| Kategori: | Lamineringssystem |
| Modell: | Pinnacle 27 |
Behöver du hjälp?
Om du behöver hjälp med GBC Pinnacle 27 ställ en fråga nedan och andra användare kommer att svara dig
Lamineringssystem GBC Manualer
5 Januari 2025
5 December 2024
7 Oktober 2024
14 September 2024
14 September 2024
24 Augusti 2024
24 Augusti 2024
23 Augusti 2024
18 Augusti 2024
16 Augusti 2024
Lamineringssystem Manualer
- Lervia
- Konig
- SEAL
- Powerfix
- Rexel
- Quigg
- Aurora
- Marquant
- DESQ
- Genie
- United Office
- Brother
- Q-CONNECT
- Hama
- Sencor
Nyaste Lamineringssystem Manualer
2 Mars 2025
9 Februari 2025
8 Januari 2025
5 Januari 2025
21 Oktober 2024
30 September 2024
29 September 2024
27 September 2024
25 September 2024
25 September 2024