GE GPF425W Bruksanvisning
GE
Diskmaskin
GPF425W
Läs gratis den bruksanvisning för GE GPF425W (8 sidor) i kategorin Diskmaskin. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7 recensioner. Har du en fråga om GE GPF425W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8

BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT – Save these instruc-
tions for local inspector’s use.
IMPORTANT – Observe all governing
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
Note to Consumer – Keep these instructions
with your Owner’s Manual for future
reference.
Installation
Instructions
1/4" Custom Dishwasher
Door and Access Panel Kit
GPF425 Series Kit
GPF425A-Almond Trim Kit, GPF425B-Black Trim Kit,
GPF425C-Bisque Trim Kit, GPF425W-White Trim Kit
WARNING:
To prevent electric shock, disconnect electri-
cal power supply to dishwasher before
changing panels. Do not operate dishwasher
while changing panels or when lower access
panel assembly is removed.
TOOLS AND MATERIALS REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Electric drill
• 1/8" drill bit
• Masking tape
• Safety glasses
• Gloves to protect against sharp edges
KIT INCLUDES:
• Left, right and bottom door trim
• Top and bottom access panel trim
• Color matched screws
STOP
INSTALLATION OPTIONS
This trim kit is designed to accommodate 1/4"
thick panels. A raised panel screwed or glued to
1/4" thick backing can be used. The raised
portion of the panel must be fabricated to
permit clearances for the trim on all sides.
• “X” Clearance shown at the bottom of the
raised panel must be maintained to prevent
the door from striking the access panel when
opened.
Appearance Total “X”
Panel Backing Thickness Clearance
3/4" 1/4" 1" 2"
1/2" 1/4" 3/4" 1-7/8"
A 3/4" thick custom panel may be installed by
routing the top and sides to 1/4" thickness. The
bottom edge, Dimension “X”, should be 1-1/2"
high and 1/4" thick.
IMPORTANT!
GPF100 Dishwasher Door Spring Kit
MUST BE installed when custom
door panels weigh 4 pounds or more.
18-7/8"
1/4" Min. Clearance
23-9/16"
Appearance
Panel
1/4"
Thick
Panel 1/8" Min.
Clearance
1/8" Min.
Clearance
X
Clearance
3-11/16"
1/4" Min. Clearance
All Sides
29-9/16"
Access Panel
Produktspecifikationer
| Varumärke: | GE |
| Kategori: | Diskmaskin |
| Modell: | GPF425W |
Behöver du hjälp?
Om du behöver hjälp med GE GPF425W ställ en fråga nedan och andra användare kommer att svara dig
Diskmaskin GE Manualer
18 Oktober 2025
22 Februari 2025
31 Januari 2025
29 Januari 2025
28 Januari 2025
31 December 2025
31 December 2025
8 December 2024
8 December 2024
21 Oktober 2024
Diskmaskin Manualer
- Euromaid
- Scholtes
- Dometic
- Barazza
- Ansonic
- Russell Hobbs
- Omega
- Saba
- Sanyo
- Fors
- Blaupunkt
- Hoover
- Caple
- CMA Dishmachines
- New Pol
Nyaste Diskmaskin Manualer
23 Oktober 2025
21 Oktober 2025
21 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025