GE GSD3301JBB Bruksanvisning
GE
tvättmaskin
GSD3301JBB
Läs gratis den bruksanvisning för GE GSD3301JBB (32 sidor) i kategorin tvättmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om GE GSD3301JBB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/32
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
Installation Instructions
Built-In Dishwasher
If you have questions, call 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com
IMPORTANT – The dishwasher MUST be
installed to allow for future removal from the
enclosure if service is required.
If you received a damaged dishwasher, you should
immediately contact your dealer or builder.
Optional Accessories – See the Owner’s Manual for
available custom panel kits.
FOR YOUR SAFETY
Read and observe all CAUTIONS and WARNINGS
shown throughout these instructions. While
performing installations described in this booklet,
gloves and safety glasses should be worn.
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
IMPORTANT – Observe all governing codes
and ordinances.
• Note to Installer – Be sure to leave these
instructions for the consumer and local inspector’s
use.
• Note to Consumer – Keep these instructions with
your Owner’s Manual for future reference.
• Skill Level – Installation of this dishwasher requires
basic mechanical, electrical and plumbing skills.
Proper installation is the responsibility of
the installer. Product failure due to improper
installation is not covered under the GE
Appliance Warranty. See warranty information.
• Completion Time – 1 to 3 Hours. New installations
require more time than replacement installations.
31-31547-1 02-15 GE
In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca
GE Appliances
TOOLS YOU WILL NEED:
• Safety glasses
• 1/4" and 5/16" nutdrivers
• Flashlight
• Gloves
• Adjustable wrench (6”)
• Phillips-head screwdriver
• Measuring tape
• Level
• Carpenter’s square
• Bucket to catch water when flushing water
line
• Tubing cutter
• 15/16" socket wrench
FOR NEW INSTALLATIONS:
• Hole saw set
• Drill and appropriate bits
PARTS SUPPLIED IN INSTALLATION
PACKAGE:
• Two 8-18 x 5/8" Phillips-head wood screws
• Junction box cover and #10 hex head screw
• Drain hose (78" long) and hose clamp
• Cord protector (Power Cord Models Only)
• Conversion leads (Power Cord Models Only)
• Literature, product samples and/or coupons
MATERIALS YOU WILL NEED:
• WX09X70910 or WX09X70911 power cord
if applicable to your installation
• UL-Listed wire nuts (3)
• Thread seal tape
• Depending on model, 90° elbow (¾” hose
internal thread on one end, opposite end
sized to fit water supply) -OR- ferrule,
compression nut and 90° elbow (3/8” NPT
external thread)
• GPF65 Side-mount bracket kit for use with
granite countertops
FOR NEW INSTALLATIONS:
• Electrical cable
• Water line–3/8" minimum copper tubing
(including ferrule and compression nut)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• GPF10S drain hose (10' long), if needed
• Screw-type hose clamps
Hose Clamp
78" Drain Hose
Thread
Seal Tape
3 Wire Nuts Hot Water Line–3/8"
Minimum Copper
Tubing
Electrical Cable
or WR09X70910
or WX09X70911
Power Cord
Air
Gap
Screw-Type
Hose Clamps
Strain Relief
Phillips-Head
Screwdriver
Level Carpenter’s
Square
Measuring Tape
Safety Glasses Flashlight
Gloves
Hole Saw Set
Drill and
Bits
6KXW2ȹ
Valve
1/4" and 5/16" Nutdrivers
Adjustable
Wrench
Tubing
Cutter
GPF65 Side-Mount
Bracket Kit
#8
Phillips-Head
Wood Screws
5/8" long
Screw Kit
#10
Hex Head
Junction Box Screw
1/2" long Junction Box Cover
2
Cord Protector
(Power Cord Models Only)
Conversion Leads
(Power Cord Models Only)
15/16"
Socket Wrench
Bucket
Optional 10'
Drain Hose
GPF10S
Waste Tee
Coupler for
optional drain
hose
90° Elbow or Ferrule
and Compression Nut
(depending on model)
Installation Preparation – Enclosure
PREPARE DISHWASHER ENCLOSURE
Figure A
To reduce the risk of shock, fire, or injury
to persons, the installer must ensure that
the dishwasher is completely enclosed at
the time of installation.
• The rough cabinet opening must have a minimum
width and depth of 24" and height of 34-1/2" ± 1/4"
IURPWKHÀRRUWRWKHXQGHUVLGHRIWKHFRXQWHUWRS
• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to
HQVXUHDJRRG¿W5HIHUWR)LJXUH$
• For a corner installation, allow 2" minimum
clearance between the dishwasher and the
adjacent wall.
• Provide at least 27" in front of the dishwasher to
allow the dishwasher door to open fully. Refer to
Figure B.
0DNHVXUHWKHÀRRULVOHYHOLQVLGHWKHRSHQLQJDQG
HYHQZLWKWKH¿QLVKHGÀRRURIWKHNLWFKHQ7KLVZLOO
facilitate removal of the dishwasher at a later date
for service, if needed.
3
Figure B
• The dishwasher must be installed no more than
10 feet from sink for proper drainage.
• The dishwasher must be fully enclosed on the top,
sides and back.
• The dishwasher must not support any part of the
enclosure.
2" Minimum
Countertop
Dishwasher
27" Minimum
Clearances:
In a corner installation, provide
at least 2" clearance between
the dishwasher and the adjacent
cabinet, wall or other appliance.
Provide at least 27" of clearance
in front of the dishwasher.
Para reducir el riesgo de choque, incendio
o lesión a personas, el instalador se
debe cerciorar de que la lavadora esté
completamente cerrada en el momento
de la instalación.
ADVERTENCIA
WARNING
Produktspecifikationer
| Varumärke: | GE |
| Kategori: | tvättmaskin |
| Modell: | GSD3301JBB |
Behöver du hjälp?
Om du behöver hjälp med GE GSD3301JBB ställ en fråga nedan och andra användare kommer att svara dig
tvättmaskin GE Manualer
2 April 2025
13 Januari 2025
8 Januari 2025
17 December 2024
15 Oktober 2024
14 Oktober 2024
8 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
tvättmaskin Manualer
- Vox
- Fisher Paykel
- High One
- BEKO
- Mabe
- Winia
- PolyJohn
- Panasonic
- Summit
- Nodor
- Consul
- Ardo
- Primus
- Indesit
- AEG
Nyaste tvättmaskin Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025