GE JGP326BEVBB Bruksanvisning

GE Ugn JGP326BEVBB

Läs gratis den bruksanvisning för GE JGP326BEVBB (32 sidor) i kategorin Ugn. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om GE JGP326BEVBB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/32
30" Sealed Gas Cooktop
Installation
Instructions
CAUTION: Before you begin, read these
instructions completely and carefully.
IMPORTANT—Save these instructions for
local inspector’s use.
IMPORTANT—OBSERVE ALL
GOVERNING CODES AND ORDINANCES.
Note to Installer—Be sure to leave these
instructions with the Consumer.
Note to Consumer—Keep these
instructions for future reference.
•Note—This appliance must be properly
grounded.
PARTS INCLUDED
1/8" Drill Bit &
Electric or
Hand Drill
Phillips
Head
Screwdriver
Pencil
Ruler or
Straightedge
Saber Saw
2 screws
TOOLS YOU WILL NEED
229C4053P463-2
31-10504-2 (04-03 JR)
1
2 Hold
Down
Brackets
Questions? Call GE Answer Center at 800.626.2000 or visit our
Website at: www.geappliances.com
MATERIALS NEEDED
Foam
Tape
Pipe Wrench
JGP336, JGP930, JGP326
Pipe Fittings
T
e
f
l
o
n
T
a
p
e
F
o
r
U
s
e
W
i
t
h
G
a
s
Pipe Sealant
Shut Off Valve
IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturers instructions.
In the Commonwealth of Massachusetts:
This product must be installed by a licensed
plumber or gas fitter.
When using ball-type gas shut-off valves,
they shall be the T-handle type.
A flexible gas connector, when used,
must not exceed 3 feet.
WARNING!!
If the information in this manual
is not followed exactly, a fire, explosion
or gas leak may result, causing property
damage, personal injury or death.
Installation of this cooktop must conform
with local codes or in the absence of local
codes with the National Fuel Gas Code,
ANSI Z223. 1-Latest edition.
Be sure your cooktop is installed properly
by a qualified installer or service technician.
To eliminate reaching over surface burners,
cabinet storage above burner should be avoided.
Do not install the unit near an outside door or
where a draft may affect its use.
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance!
STOP!
STOP!
Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR SAFETY
Do not try to light any appliance. Do not touch
any electrical switch; do not use any phone in
your building.
Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
If you cannot reach your gas supplier, call the
fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
This cooktop has been design certified by CSA
International. You’ll find safety precautions in
your Owner’s Manual. Read them carefully.
2
This appliance must be electrically
grounded. Check with your local codes
which apply in your area. If no local codes
apply, the National Electrical Code, ANSI/
NFPA No. 70-Latest Edition must be
followed. Write to:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
Be sure the installation of this cooktop
in a mobile home conforms with the
Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280.
If this standard does not apply, you must
follow the standard for Manufactured Home
Installations, ANSI A225.1 and Manufactured
Home Installations, Sites and Communities
and ANSI/NFPA 501A or with local codes.
You can get a copy of the Federal Standard
by Writing:
Office of Mobile Home Standards
HUD Building
451 7th Street, S.W.
Washington, D.C. 24010
ELECTRICAL
REQUIREMENTS
WHAT TO DO IF YOU SMELL
GAS:
Remove Installation Instructions
from literature pack and read them
carefully before you begin.
Be sure to place all literature,
Owner’s Manual, Installations, etc.
in a safe place for future reference.
Make sure you have all the tools and
materials you need before starting the
installation of the cooktop.
Your home must provide the adequate
electrical service needed to safely and
properly use your cooktop. (Refer to
section on electrical requirements.)
Remove packaging materials and
literature package from the cooktop
before beginning installation.
When preparing cooktop opening,
make sure the inside of the cabinet
and the cooktop do not interfere with
each other. (See section on preparing
the opening.)
When installing your cooktop in your
home, make sure all local codes and
ordinances are followed exactly as
stated.
Pre-Installation Checklist
3
EASY INSTALLATION OF YOUR NEW
30" COOKTOP
Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector's use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).
Before you begin-Read these
instructions completely and
carefully.
IMPORTANT- Save these
instructions for local inspector's use.
IMPORTANT- OBSERVE ALL
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave
these instructions with the consumer.
OWNER- Keep these instructions
for future reference.
Note- This appliance must be
properly grounded (if applicable).
FOR YOUR SAFETY
Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector's use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).
Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector's use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).
ELECTRICAL REQUIREMENTS
Before you begin-Read these
instructions completely and
carefully.
IMPORTANT- Save these
instructions for local inspector's use.
IMPORTANT- OBSERVE ALL
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave
these instructions with the consumer.
OWNER- Keep these instructions
for future reference.
Note- This appliance must be
properly grounded (if applicable).
Before you begin-Read these
instructions completely and
carefully.
IMPORTANT- Save these
instructions for local inspector's use.
IMPORTANT- OBSERVE ALL
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave
these instructions with the consumer.
OWNER- Keep these instructions
for future reference.
Note- This appliance must be
properly grounded (if applicable).
Before you begin-Read these
instructions completely and
carefully.
IMPORTANT- Save these
instructions for local inspector's use.
IMPORTANT- OBSERVE ALL
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave
these instructions with the consumer.
OWNER- Keep these instructions
for future reference.
Note- This appliance must be
properly grounded (if applicable).
Installation Instructions
Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by the cooktop.
O
N
H
O
T
Literature Package
Cooktop
Styrofoam
Packaging

Produktspecifikationer

Varumärke: GE
Kategori: Ugn
Modell: JGP326BEVBB

Behöver du hjälp?

Om du behöver hjälp med GE JGP326BEVBB ställ en fråga nedan och andra användare kommer att svara dig