GE JX1827SB Bruksanvisning

GE Magnetron JX1827SB

Läs gratis den bruksanvisning för GE JX1827SB (4 sidor) i kategorin Magnetron. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 13.5 recensioner. Har du en fråga om GE JX1827SB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
PART QUANTITY
Trim Frame 1
Bottom Duct 1
Side Duct 1
1” Screws 6
(4 required, 2 extra)
1/2” Screws 15
(11 required, 4 extra)
Anti-Tip Bracket 1
Bottom Bracket 1
Upper Duct 1
Template 1
PARTS INCLUDED
Questions? Call GE Answer Center at 800.626.2000
or Visit our Website at:
www.GEAppliances.com
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
Installation Built-In Trim Kits
Instructions
JX1827 and JX1830
Read these instructions completely and carefully.
IMPORTANT Save these
instructions for local inspector’s use.
IMPORTANT Observe all
governing codes and ordinances.
Note to Installer Be sure to leave these
instructions with the Consumer.
Note to Consumer Keep these
instructions for future reference.
BEFORE YOU BEGIN
Unplug the microwave oven before attempting
installation of this kit.
Skill level Installation of this appliance requires basic
mechanical and electrical skills.
Completion time 1-3 hours
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
This kit is UL listed for installation alone or over any
General Electric/Hotpoint/RCA single electric wall
oven.
TOOLS YOU WILL NEED
Phillips screwdriver
Pencil
Tape measureAwl or punch
Drill with 764bit or #35
1
FOR YOUR SAFETY:
WARNING Before beginning the
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.


Produktspecifikationer

Varumärke: GE
Kategori: Magnetron
Modell: JX1827SB
Färg på produkten: Zwart
Vikt: 300 g
Snäll: AV-zender
LED-indikatorer: Ja
Nuvarande: 0.06 A
Videolägen som stöds: 1080p
Maximal upplösning: 1920 x 1200 Pixels
Ljudsystem: Stereo
VGA (D-Sub) port(ar): 1
Anslutning för nätadapter: Ja
Ljudingångar: 1
Grafikupplösningar som stöds: 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
VGA (D-Sub) ingångsportar: 1
Extern anpassning: Ja
RJ-45 utgångsportar: 1
Mått (B x D x H): 121 x 71.8 x 24.2 mm
Driftspänning: 12 V
Maximal-räckvidd: 100 m
Kabeltyper som stöds: Cat5

Behöver du hjälp?

Om du behöver hjälp med GE JX1827SB ställ en fråga nedan och andra användare kommer att svara dig