GE JXS37WW Bruksanvisning
Sidor 1 Engels Ugn
Läs bruksanvisningen för GE JXS37WW gratis online eller ladda ner PDF:en. 21 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
Installation Instructions
Backsplash Kit
Tools Required:
#2 Phillips screw driver
Installing the Kit
Attach the assembly to rear of the range to the five holes above the louvers using the 5 screws
located in the pack. See Figure 1
A
A1
A2
Attach the backsplash assembly to the rear of the range prior to installing the range in the
countertop opening.
A3
Pub. No. 31-10452
229C4053P426
If the backsplash is being attached to a Drop-In range, the anti-tip bracket must be moved to
position 5 and proper attachments to the wall must be made to assure that the anti-tip bracket
engages below the attachment. The attachment must be able to withstand 200 lbs of force at the
engagement point. Refer to the Figure 2 below.
A4 Refer to the range Installation Instructions to place the range in the countertop opening and
perform all tests required.
The purpose of the backsplash kit is to fill the gap between the back of the range and the wall, when
the countertop opening is cut to a 25” depth.
NOTE: This kit supplies a spacer that is used when a body side kit is used in conjuction with this kit.
Keep this part for that type of application.
1/4” Hex head Driver
Parts Supplied:
Backsplash Assembly
5 Screws
1 Spacer
Fig. 1
Fig. 2
1
2
3
4
5
Anti-Tip Bracket Location
( Rear of Range )
Glass Cooktop
Move
Anti-Tip bracket
from Position 1
(as supplied)
to Position 5
Interior Wall
BACKSPLASH ANTI -TIP INSTALLATION
DROP - IN ONLY
Backsplash
Attachment
Anchored to
Wall Stud Is
Recommended
Anti-Tip
Bracket
Attachment
To Engage
Bracket By 1/2"
Position #5
NonKit
Applications
1-1/2"
10 - 3/8"
Attachment
*
Wire
Cover
Wall
Stud
Glass MaintopCountertop
Surface
Cook Top
Wire Cover
Backsplas
Backsplas
Backsplas
Backsplas
Backsplash
Move Anti-Tip Brac
Move Anti-Tip Brac
Move Anti-Tip Brac
Move Anti-Tip Bracket
ket
ket
ket
for Dr
for Dr
for Dr
for Drop-IN with this
op-IN with this
op-IN with this
op-IN with this
Move Anti-Tip Bracket
(See Fig. 2)
5-Screws Supplied
(2 - each end
1 - in the middle)
Drop-In Only
Produktspecifikationer
| Varumärke: | GE |
| Kategori: | Ugn |
| Modell: | JXS37WW |
Behöver du hjälp?
Om du behöver hjälp med GE JXS37WW ställ en fråga nedan och andra användare kommer att svara dig
Ugn GE Manualer
GE JBP21BHCT Bruksanvisning GE JXFILLR1DD Bruksanvisning GE EGR3000ELBB Bruksanvisning GE JX27RBK Bruksanvisning GE JGP328BEKBB Bruksanvisning GE JXS77WW Bruksanvisning GE JXHC1 Bruksanvisning GE JBP66WHWW Bruksanvisning
Populära i Ugn
Ugn Manualer
Nyaste Ugn Manualer
Hotpoint HOM 258H X UK Bruksanvisning Moffat Turbofan E32D5 Bruksanvisning Hotpoint HO 458CF B UK Bruksanvisning AEG TE8PB731AB Bruksanvisning Hotpoint SI4S 854 C BL Bruksanvisning Hotpoint HOI4S8CM0XUK Bruksanvisning Bosch HUA716EA0I Bruksanvisning Unox EVEREO XEEC-0611-EPRS Bruksanvisning Siemens HJ852GYB0T Bruksanvisning Siemens HB578GES7 Bruksanvisning