GE Profile JBP79TDWW Bruksanvisning

GE Ugn Profile JBP79TDWW

Läs gratis den bruksanvisning för GE Profile JBP79TDWW (12 sidor) i kategorin Ugn. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om GE Profile JBP79TDWW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
Skill Level: High Average Low
Completion Time: 1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty. See the Owners Manual for warranty
information.
CAUTION: Before you begin
Read these instructions carefully and
completely.
IMPORTANT- Save these instructions for
local inspectors use.
IMPORTANT- Observe all governing codes
and ordinances.
Self Cleaning Free-Standing
Electric Range
Installation
Instructions EER2000, EER3000 JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP65,
JBP66, JBP67, JBP70, JBP78, JBP79, JBP85, JB940, JB960, JB965
NOTE TO INSTALLER- Be sure to leave
these instructions with the consumer.
OWNER- Keep these instructions for future
reference.
WARNING- This appliance must be
properly grounded.
Parts Included
Tools You Will Need
Pub. No. 31-10463
229C4053P447-3 1
“If you have questions, Call 800-GE-CARES or visit our website at:
www.GEAppliances.com”
1/4”Nut
driver
Adjustable wrench
Pencil
Materials Needed
Lag Bolts Anchor Sleeves
4- Wire Cord
4’long
3 -Wire Cord
4’long
(For Concrete Floors Only)
( UL Approved 40 AMP)
OR
Drill with
1/8” Bit
Anti-Tip Bracket and leg leveler
Safety
Glasses Tape Measure
Level 5/16 Hex Head
Nut driver
Phillips
Screwdriver
Flat-Bladed
Screwdriver
1
2
3
4


Produktspecifikationer

Varumärke: GE
Kategori: Ugn
Modell: Profile JBP79TDWW

Behöver du hjälp?

Om du behöver hjälp med GE Profile JBP79TDWW ställ en fråga nedan och andra användare kommer att svara dig