GE Profile JVM1661BB Bruksanvisning

GE Magnetron Profile JVM1661BB

Läs nedan 📖 manual på svenska för GE Profile JVM1661BB (24 sidor) i kategorin Magnetron. Denna guide var användbar för 26 personer och betygsatt med 4.6 stjärnor i genomsnitt av 13.5 användare

Ladda ner PDF

Sida 1/24

Questions? Call GE Answer Center at 800.626.2000

or Visit our Website at:

www.GEAppliances.com

READ CAREFULLY.

KEEP THESE INSTRUCTIONS.

Installation Over the Range

Instructions Microwave Oven

Read these instructions completely and carefully.

•IMPORTANT –Save these

instructions for local inspector’s use.

•IMPORTANT –Observe all

governing codes and ordinances.

• Note to Installer –Be sure to leave these

instructions with the Consumer.

BEFORE YOU BEGIN

• Note to Consumer –Keep these

instructions for future reference.

•Skill level – Installation of this appliance requires

basic mechanical and electrical skills.

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not

covered under the Warranty.

For a Spanish version of this manual, visit our Website at www.GEAppliances.com.

Para consultar una version en español de este manual de instrucciones, visite nuestro sitio

de internet www.GEAppliances.com.

Recirculating ........................................ 19–22

Attach Mounting Plate to Wall ............19

Preparation of Top Cabinet ................19

Check Microwave Assembly ................20

Adapting Microwave Blower

for Recirculation ..........................20–21

Mount the Microwave

Oven..............................................21–22

Installing the Charcoal Filter ..............22

Before You Use Your Microwave .......................... 23

CONTENTS

General information

Important Safety Instructions .................................. 3

Electrical Requirements .......................................... 3

Hood Exhaust ...................................................... 4–5

Damage – Shipment/Installation ............................ 6

Parts Included .......................................................... 6

Tools You Will Need ................................................ 7

Mounting Space ...................................................... 7

Step-by-step installation guide

Placement of Mounting Plate.............................. 8–10

Removing the Mounting Plate ...................... 8

Finding the Wall Studs .................................. 8

Determining Wall Plate Location .................. 9

Aligning the Wall Plate................................ 10

Installation Types ............................................ 11–22

Outside Top Exhaust ............................ 12–14

Attach Mounting Plate to Wall ............12

Preparation of Top Cabinet ................13

Checking for Proper Damper

Operation............................................13

Mount the Microwave Oven ................13

Adjust the Exhaust Adaptor ................14

Connecting Ductwork..........................14

Outside Back Exhaust ............................ 15–18

Preparing Rear Wall for

Outside Back Exhaust ....................15–16

Attach Mounting Plate to Wall ............16

Preparation of Top Cabinet ................16

Adapting Microwave Blower

for Outside Back Exhaust......................17

Mount the Microwave Oven ................18

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

This product requires a three-prong grounded

outlet. The installer must perform a ground continuity

check on the power outlet box before beginning the

installation to insure that the outlet box is properly

grounded. If not properly grounded, or if the outlet

box does not meet electrical requirements noted

(under ELECTRICAL REQUIREMENTS), a

qualified electrician should be employed to

correct any deficiencies.

CAUTION: For personal

safety, remove house fuse

or open circuit breaker

before beginning installation

to avoid severe or fatal

shock injury.

CAUTION: For personal safety, the mounting surface

must be capable of supporting the cabinet load, in

addition to the added weight of this 63-85 pound

product, plus additional oven loads of up to 50

pounds or a total weight of 113-135 pounds.

CAUTION: For personal safety, this product cannot

be installed in cabinet arrangements such as an island or

a peninsula. It must be mounted to BOTH a top cabinet

AND a wall.

NOTE: For easier installation and personal safety, it is

recommended that two people install this product.

IMPORTANT—PLEASE READ CAREFULLY. FOR

PERSONAL SAFETY, THIS APPLIANCE MUST BE

PROPERLY GROUNDED TO AVOID SEVERE OR

FATAL SHOCK.

The power cord of this appliance is equipped with a

three-prong (grounding)

plug which mates with a

standard three-prong

(grounding) wall receptacle

to minimize the possibility

of electric shock hazard

from this appliance.

You should have the wall receptacle and circuit checked

by a qualified electrician to make sure the receptacle is

properly grounded.

Where a standard two-prong wall receptacle is

encountered, it is very important to have it replaced

with a properly grounded three-prong wall receptacle,

installed by a qualified electrician.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT,

DEFORM, OR REMOVE ANY OF THE PRONGS

FROM THE POWER CORD. DO NOT USE WITH

AN EXTENSION CORD.

ELECTRICAL

REQUIREMENTS

Product rating is 120 volts AC, 60 Hertz, 15 amps, and

1.58 kilowatts. This product must be connected to a

supply circuit of the proper voltage and frequency.

Wire size must conform to the requirements of the

National Electrical Code or the prevailing local code

for this kilowatt rating. The power supply cord and

plug should be brought to a separate 15 to 20 ampere

branch circuit single grounded outlet. The outlet box

should be located in the cabinet above the microwave

oven. The outlet box and supply circuit should be

installed by a qualified electrician and conform to the

National Electrical Code or the prevailing local code.

Insure proper

ground exists

before use

Installation Instructions

Produktspecifikationer

Varumärke:	GE
Kategori:	Magnetron
Modell:	Profile JVM1661BB
Färg på produkten:	Zwart
Vikt:	66000 g
Bredd:	1928 mm
Djup:	76 mm
Höjd:	1099 mm
Förpackningens vikt:	89000 g
Förpackningens bredd:	2224 mm
Djuppackning:	373 mm
Förpackningshöjd:	1427 mm
Skärm diagonal:	86 "
Upplösning:	3840 x 2160 Pixels
Pekskärm:	Nee
Original bildförhållande:	16:9
USB uttag:	Ja
Placeringsstöd:	Binnen
Ethernet LAN:	Ja
Monteringsmetod:	Muur
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Medföljande kablar:	AC
Typiskt kontrastförhållande:	1200:1
Ljusstyrka:	500 cd/m²
Antal HDMI-portar:	2
Audio-ingan (L, R):	2
DVI-port:	Ja
Antal Ethernet LAN (RJ-45)-portar:	2
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	20 W
Antal inbyggda högtalare:	2
Strömförbrukning (i standby):	0.5 W
Antal USB-anslutningar:	2
Display, antal färger:	1.073 biljoen kleuren
RS-232C:	Ja
HDCP:	Ja
Strömförbrukning (när avstängd):	0.3 W
HD typ:	4K Ultra HD
Displayteknik:	IPS
Respons tid:	8 ms
Panelens livslängd:	50000 uur
VESA montering:	Ja
Panelmonteringsgränssnitt:	600 x 400 mm
Rambredd (nederst):	15.2 mm
Rambredd (sida):	15.2 mm
Rambredd (överst):	15.2 mm
Modell:	Horizontaal/Verticaal
Avsedd för:	Universeel
Drifttider (timmar/dagar):	24/7
DVI-D-portar:	1
Antal HDMI-ingångsportar:	2
Fjärrkontroll (IR) ingång:	1
Kontrastförhållande (dynamisk):	50000:1
Antal DisplayPorts:	2
VGA (D-Sub) ingångsportar:	1
Ljud (L,R) ut:	1
Antal högtalarutgångar:	2
Skärmdiameter i centimeter:	217.4 cm
Ethernet LAN, dataöverföringshastigheter:	10, 100 Mbit/s
DisplayPorts in:	1
DisplayPorts ut:	1
Förvaringstemperatur:	-20 - 60 °C
LED backlight-type:	Edge-LED
Förvaringsfuktighet:	20 - 80 procent
Multidisplay stöds:	Ja
Fjärrutgång (IR).:	1
Aktivt visningsområde (bxh):	1895 x 1065.9 mm
HDCP-version:	2.2
Fjärrkontroll ingår:	Ja
Produktdesign:	Digitale signage flatscreen
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50/60 Hz
Strömförbrukning (typiskt):	480 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent
Batterier-ingår:	Ja