GE UPK3 Bruksanvisning
Läs gratis den bruksanvisning för GE UPK3 (12 sidor) i kategorin Ismaskin. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 9 recensioner. Har du en fråga om GE UPK3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
Questions? Call 800.GE.CARES (800.432.2737) or visit our Web site at: GEAppliances.com
Installation Drain Pump
Instructions Kit UPK3
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or hurt you and others.
All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These
words are defined as:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
DANGER
WARNING
CAUTION
BEFORE YOU BEGIN WHAT YOU WILL NEED:
Read these instructions completely and carefully.
• IMPORTANT – Save these instructions for
local inspector’s use.
• IMPORTANT – Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill level – Installation of this appliance requires basic
mechanical skills.
• Proper installation is the responsibility of installer.
• Product failure due to improper installation is not
covered under the Warranty.
3/8” open/box wrench or adjustable wrench
#2 Phillips screwdriver
Slip joint pliers
Side cutting pliers
NOTE: This pump can be installed in a gourmet cube ice
machine or a nugget ice machine.
17-3588-01 31-49092 10-15 GE
5
7
2
3
8
6
10
11
4
1
9
KIT CONTENTS:
1 - Pump and motor with check valve
2 - Switch mounting bracket assembled to
switch assembly
3 - Wire harness
4 - Pressure hose (clear)
5 - Drain hose (white preformed)
6 - Stainless steel shield (for use in cube
models only)
7 - Snap fit clamp
8 - Hose clamp
9 - 2 Screws with lock washers
10- 2 Nuts
11- 2 Washers
Produktspecifikationer
| Varumärke: | GE |
| Kategori: | Ismaskin |
| Modell: | UPK3 |
Behöver du hjälp?
Om du behöver hjälp med GE UPK3 ställ en fråga nedan och andra användare kommer att svara dig
Ismaskin GE Manualer
24 September 2024
24 September 2024
24 September 2024
24 September 2024
16 September 2024
2 September 2024
26 Augusti 2024
25 Augusti 2024
23 Augusti 2024
22 Augusti 2024
Ismaskin Manualer
- Sunbeam
- KitchenAid
- Studio
- Magic Chef
- ProfiCook
- Edgestar
- Magimix
- OneConcept
- Guzzanti
- Silhouette
- Montiss
- Jocel
- Gaggia
- Emerio
- Xsquo
Nyaste Ismaskin Manualer
8 Januari 2025
8 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
3 Januari 2025
1 Januari 2025
31 December 2025
30 December 2025
27 December 2024