GE ZXR7510C Bruksanvisning

GE Inte kategoriserad ZXR7510C

Läs gratis den bruksanvisning för GE ZXR7510C (12 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10 recensioner. Har du en fråga om GE ZXR7510C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com

Installation

Instructions

ZXR758 and ZXR7510

Recirculating Accessories

For Model ZV750, Vent Hood

Mon

ogram

Installation Preparation

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRICAL

SHOCK OR INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

A. Use this unit only in the manner intended by the

manufacturer. If you have any questions, contact the

manufacturer.

B. Before servicing or cleaning unit, switch power off

at the service panel and lock service panel to prevent

power from being switched on accidentally. If the

service panel cannot be locked, fasten a tag or

prominent warning label to the panel.

For general ventilating use only. Do not use to

exhaust hazardous or explosive materials or vapors.

Structural framing, installation work and electrical

wiring must be done by qualified person(s). In

accordance with all applicable codes and standards

including fire-rated construction.

Sufficient air is needed for proper combustion

and exhausting of gases through the flue (chimney)

of fuel burning equipment to prevent back drafting.

Follow the heating equipment manufacturer’s

guideline and safety standards such as those

published by the National Fire Protection Association

(NFPA), and the American Society for Heating,

Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

Local codes vary. Installation electrical connections

and grounding must comply with applicable codes.

In the absence of local codes, the vent should be

installed in accordance with National Electrical

Code ANSI/NFPA 70-1990 or latest edition.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

• IMPORTANT – Save these instructions for

local inspector’s use.

• IMPORTANT – Observe all governing

codes and ordinances.

• – Be sure to leave these instruc-Note to Installer

tions with the Consumer.

• Note to Consumer – Keep these instructions with

your Owner’s Manual for future reference.

• Skill Level – Installation of this appliance requires

basic mechanical and electrical skills.

• Completion time – 1 to 3 hours.

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not

covered under the Warranty.

For Monogram local service in your area,

1.800.444.1845.

For Monogram service in Canada, call

1-.888.880.3030.

For Monogram Parts and Accessories, call

1.800.626.2002.

CAUTION:

Due to the weight and size of this vent hood and to

reduce the risk of personal injury or damage to the

product, TWO PEOPLE ARE REQUIRED FOR

PROPER INSTALLATION.

WARNING:

To reduce the risk of fire or electrical shock, do not use

this hood with any external solid-state speed control

device. Any such alteration from original factory wiring

could result in damage to the unit and/or create an

electrical safety hazard.

CONTENTS

Installation Preparation

Required Accessories .................................................. 3

Product Dimensions ................................................... 3

Duct Cover Accessories .............................................. 4

Power Supply .............................................................. 4

Tools and Materials Required .................................... 4

Remove Packaging, Check Contents ......................... 5

Installation Instructions

Step 1, Determine Installation Location ................... 6

Step 2, Install Mouning Brackets ............................... 6

Step 3, Install the Hood ............................................. 7

Step 4, Size Duct Piece ............................................... 7

Step 5, Install Air Deflector Assembly ....................... 7

Step 6, Connect Electrical .......................................... 8

Step 7, Install Duct Covers and Utility Bars .............. 8

Step 8, Install Filters ................................................... 9

Step 9, Finalize Installation ........................................ 9

Installation Preparation

REQUIRED ACCESSORIES

This book provides step by step instructions to install the

Monogram ZV750 wall mounted hood for recirculating

operation.

• One of the following accessory kits is required for

non-vented wall mounted installations of model ZV750.

Choose the correct kit according to ceiling heights:

ZXR758 – For 8 to 9 ft. ceiling height.

ZXR7510 – For 9 to 10 ft. ceiling height.

• Order the required accessory at the same time as the

vent hood and have on site before installation.

• Each kit includes decorative duct cover, air deflector

and charcoal filters.

PRODUCT DIMENSIONS

The vent hood must be installed 24" min. and 30" max.

above the cooking surface. 25-1/2" is recommended for

best performance and to insure that the duct cover

meets the ceiling. The cooking surface should be at least

36” above the floor. Installation will be easier if the vent

hood is installed before the cooktop and countertop is

installed.

* ZXR758

26-1/4" for 8 ft. Ceiling

38-1/4" for 9 ft. Ceiling

ZXR7510

34-1/4" to 50-1/4" for

9 ft. to 10 ft. Ceiling

* The distance between the cooking surface and the bottom of the

hood must be at least 24” and up to 30” The 25-1/2” recommended

installation height, above the standard 36” countertop, will insure

duct cover fit to the ceiling.

*25-1/2" Recommended

36" Min.

*Height

to Ceiling

8-1/4"

34-5/8"

21-5/8"

Produktspecifikationer

Varumärke:	GE
Kategori:	Inte kategoriserad
Modell:	ZXR7510C
Färg på produkten:	Grijs
Vikt:	1876 g
Bredd:	67 mm
Djup:	337 mm
Höjd:	140 mm
Förpackningens vikt:	2816 g
Typ av förpackning:	Doos
Processorfrekvens:	- MHz
Vormfaktor:	Full-Height/Full-Length (FH/FL)
Maximal upplösning:	7680 x 4320 Pixels
Antal HDMI-portar:	1
HDCP:	Ja
HDMI-version:	2.1a
Integrerad TV-tuner:	Nee
Antal DisplayPorts:	3
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Ja
Antal fans:	3 ventilator(en)
Färg på belysningen:	Multi
Grafikminne:	16 GB
DisplayPort-version:	1.4a
Typ av anslutning:	PCI Express 4.0
HDCP-version:	2.3
Typ av kylning:	Actief
Grafikprocessorfamilj:	NVIDIA
Grafikprocessor:	GeForce RTX 4080
ANNORLUNDA:	Ja
Grafikadapter, minnestyp:	GDDR6X
Minnesbandbredd (max):	22.4 GB/s
Minnesbuss:	256 Bit
OpenGL version:	4.6
DirectX version:	12 Ultimate
Minsta systemströmförsörjning:	750 W
Strömförbrukning (typiskt):	320 W
Exponering:	Ja
Stöd för parallell bearbetning:	Niet ondersteund
Dual Link DVI:	Nee
Maximalt antal visningar per grafikkort:	4
CUDA-kärnor:	9728
Processorn ökar klockhastigheten:	2595 MHz
Ytterligare strömkontakter medföljer:	1x 16-pin
Koeltechniek:	MSI TORX FAN 5.0