Genie GAHD-HDMI Bruksanvisning

Genie Audio/video-omvandlare GAHD-HDMI

Läs gratis den bruksanvisning för Genie GAHD-HDMI (3 sidor) i kategorin Audio/video-omvandlare. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 13 recensioner. Har du en fråga om Genie GAHD-HDMI eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

AHD to HDMI/VGA/Composite Video Converter

ITEM NO.: - GAHD HDMI

GAHD- HDMI converts AHD signal to HDMI, VGA, Composite Video or AHD loop out which

enabling users to use cost effective HDMI/VGA/BNC monitor to display AHD . camera

It also It is perfect solution when user supports 3 different output displays at same time.

wants to display AHD AHD camera to different monitor without DVR.

The BNC2 function could works with 3 different function selection: CVBS output or

AHD loop out as a distributor function or second AHD input as a switcher function.

Features:

l Converts AHD signal to HDMI, VGA, Composite Video or AHD loop out.

l Input Support: AHD 1.0 720p@25/30 and AHD 2.0 720@50/60hz,

1080p@25/30Hz.

l Output Support: HDMI, VGA, Composite Video or AHD loop out.

l 3 outputs could be display simultaneously.

l BNC connector function selection: AHD loop output, Composite video output or

second AHD input

l HDMI/VGA output support: 480p,576p,720p,1080i,1080p

l Composite video output support NTSC, PAL.

l Composite built in underscan adjustment. (allow the edges of the picture fit well)

l Built in OSD to display input/output setting.

l HDMI and DVI compliant. (Support DVI monitor by a HDMI to DVI adaptor)

Installation:

AHD LOOPOUT Mode:

3 outputs: HDMI, VGA, AHD loop output as a distributor.

CVBS Output Mode:

3 outputs: HDMI, VGA, CVBS could be display simultaneously

AHD INPUT Mode:

Allow AHD camera 2 inputs with 2 outputs: HDMI, VGA as a Switcher.

Panel View:

GAHD-HDMI

LED Indication:

DC JACK LED:

Green P Power ON

Blue S BNC1 signal received Input signal

Red H HDMI output HDMI linking

BNC2 Connector LED (BNC2 )

：

：：

Green L LOOPOUT mode

Blue S Received Input signal

Red C CVBS OUT mode

Switch, Button Function :

DIP Switch 1 : LOOPOUT / CVBS OUT function selection

DIP Switch 1 (LOOPOUT) ↑

BNC2 connector setting as LOOPOUT mode

▲▼ button for resolution switching, press button to decrease the resolution, press button「」▲「」▼ to

increase output resolution

Resolution for switch sequence will be follow as below :

480p -> 576p -> 720p/60 -> 720p/50 -> 1080i/60 -> 1080i/50 -> 1080p/60 ->1080p/50

NTSC output Resolution setting on 480p 720/60 1080i/60 1080p/60, , ,

PAL output Resolution setting on ,576p 720p/50, 1080i/50 1080p/5, 0

DIP Switch 1 (CVBS OUT) ↓

BNC2 connector setting as CVBS OUT mode

▲▼ button for underscan adjustment, press「」▲decrease underscan, press enlarge CVBS OUT 「」▼

CVBS OUT underscan

CVBS Underscan adjustment is to avoid Overscan situation on CRT screen (Overscan is the

situation in which not all of a televised image is present on a viewing screen) which cause picture

enlarge and could not see the edge of screen. The reduce screen adjustment range could be

from minimum 0% up to 20% based on each time 2% reduced.

DIP Switch 2 : INPUT / OUTPUT Mode Selection

DIP Switch 2 (Output Mode) ↑

BNC2 connector setting as output mode, connector function follow by BNC2 DIP Switch 1 selection.

DIP Switch 2 (Input Mode) ↓

BNC2 connector setting as input mode, connector function as BNC2 AHD Input 2, DIP Switch 1 setting will

be ignored.

▲▼ button as input selection, press「」▲ to display Input 1 (BNC1) picture, press 「」▼ to display Input

2 (BNC2) picture, the current display input will be add 「」* symbol marked.

DIP Switch 3 & 4

System reserved, no need setting

Restore Factory Default

Unplug power and hold to press button until power on, then release button. ▲ ▲

System will restore factory default (Input 1, HDMI & VGA 480p output, CVBS NTSC Underscan 0%)。

Caution

Before switching HDMI/VGA monitor, please make sure your monitor supported resolution. If

the monitor not supports the resolution, then there will be no output.

Specification:

ITEM NO

GAHD- HDMI

Video Input

AHD 1.0 720p@25/30 AHD 2.0 720p@50/60Hz、、1080p@25/30Hz

Video Output

HDMI & VGA (480p、576p、720p/50/60、1080i/50/60、1080p/50/60)、CVBS

(NTSC、PAL)

Input Connector

BNC (75 1Vpp)Ω

Output Connector

HDMI Type-A D- 、SUB 15、BNC

Switch

DIP Switch x 1、Tact Switch x 2

Power Supply

12V 500mA

Power Consumption

350mA

Temperature

Operation: 0 to 55℃, Storage: , Hum-20 to 85℃idity: up to 95%

Dimension mm

88 * 130 * 30

Weight g

250

Produktspecifikationer

Varumärke:	Genie
Kategori:	Audio/video-omvandlare
Modell:	GAHD-HDMI
Vikt:	10600 g
Färg:	Nee
Kabelteknik:	10/100Base-T(X)
Stöder Windows:	Ja
Maximal-upplösning:	360 x 360 DPI
Medeltid mellan fel (MTBF):	20000 uur
Standardgränssnitt:	Parallel, USB 2.0
Sidbeskrivningsspråk:	Epson ESC/P2, IBM ProPrinter
Valfri anslutning:	Serieel (RS-232)
Ljudtrycksnivå (tryck):	52 dB
Skrivhuvud:	24-pin
Mått (B x D x H):	600 x 265 x 200 mm
Buffertstorlek:	- KB
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	7.6 W
Drifttemperatur (TT):	10 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 80 procent
Bitmap-teckensnitt:	Courier, Draft, OCR-B, Prestige, Roman, Sans Serif, Script
Maximal-utskriftshastighet:	680 tekens per seconde
Skrivhuvudets livslängd:	500 miljoen tekens
Ribbon liv:	8 miljoen tekens
Maximal utskriftsbredd (kolumner):	136
Pitch karaktär:	10, 12, 15, 17.1, 20 tekens per inch
Maximal utskriftshastighet (design):	333 tekens per seconde
Maximal utskriftshastighet (LQ):	111 tekens per seconde
Enkelt ark breddstorlek:	76 - 420 mm
Enstaka ark längd storlek:	76 - 599 mm