Gerni 5000 Bruksanvisning

Gerni Högtryckstvätt 5000

Läs gratis den bruksanvisning för Gerni 5000 (4 sidor) i kategorin Högtryckstvätt. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 9 recensioner. Har du en fråga om Gerni 5000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

HIGH PRESSURE WASHER SAFETYGENERAL POWER TOOL SAFETY ELECTRICAL SAFETY

5000 - 1885PSI

SAFETY

1-23 LETCON DRIVE, BANGHOLME, VICTORIA, AUSTRALIA 3175. 0820

5000

HIGH PRESSURE WASHER

SPECIFICATIONS

VOLTAGE: 230-240V~50Hz

POWER: 1800W

MAX. PRESSURE: 13 MPa (1885psi)

RATED PRESSURE: 10.5 MPa (1522psi)

MAX. INLET PRESSURE: 1 MPa (145 psi)

RATED FLOW: 5.8L/min

MAX. FLOW RATE: 8.7L/min

HOSE LENGTH: 8m

MAX. WATER INLET TEMP.: 40°C

IP RATING: IPX5

WEIGHT: 8.7kg

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings

refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the

risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will

reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your

ﬁnger on the switch or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

h. Do not let familiarity gained from frequent use of tools allow you to become complacent and

ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power

tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack from the power tool before

making any adjustments, changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous in the

hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualiﬁed repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

WARNING! The appliance is not to be used by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction. Young children should be

supervised to ensure that they do not play with the appliance.

WARNING! High pressure injection injuries are considered to be medical emergencies. In the

event of a high pressure injection injury occurring, seek medical advice immediately.

WARNING! It is prohibited to use Pressure Washers on materials containing asbestos (Cement

sheet roofs, Fences, Walls etc.). Large numbers of asbestos ﬁbres may be released into the air,

posing a serious health hazard. If unsure about the materials you are spraying, it is recommended

that you contact your local council or government authority.

• Before connecting a tool to a power source (mains switch power point receptacle, outlet, etc.) be sure

that the voltage supply is the same as that speciﬁed on the nameplate of the tool. A power source

with a voltage greater than that speciﬁed for the tool can result in serious injury to the user, as well as

damage to the tool. If in doubt, do not plug in the tool. Using a power source with a voltage less than the

nameplate rating is harmful to the motor.

• Unsafe operation of your high pressure cleaner could lead to serious injury or death to you or others.

• The spray gun/wand is a powerful cleaning tool that could look like a toy to a child.

• Improper control of gun/wand can result in injuries to self, others and property damage. Reactive

force from the spray can result in gun/lance movement, potentially causing the operator to slip, fall or

misdirect the spray.

• Become familiar with the operation and controls of the pressure cleaner.

• Keep children away from the pressure cleaner at all times.

• Never modify or remove the safety features of this product.

• Do not operate the machine with missing, broken or unauthorized parts.

• Never leave wand unattended while unit is running.

• Keep work area free of obstacles.

• Stand on stable surface and grip gun/lance ﬁrmly. Expect the gun to kick back when engaged

• Do not use to pump ﬂammable or explosive liquids such as gasoline, fuel oil, kerosene,solvents or

thinners. Pump should only be used with liquids compatible with pressure washer component materials.

Failure to follow to this warning can result in serious personal injury, death and/or property damage.

• Only use cleaning agents designed for pressure washers. The use of other cleaning agents or chemicals

may adversely affect the safety and/or operation of the appliance.

• Do not use the appliance within range of persons unless they wear protective clothing.

• High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons,

animals, live electrical equipment or the appliance itself.

• Do not direct the jet against yourself or others in order to clean clothes or foot-wear.

• To ensure appliance safety, use only original spare parts from the manufacturer or approved by the

manufacturer.

• High pressure hoses, ﬁttings and couplings are important for the safety of the appliance. Use only hoses,

ﬁttings and couplings recommended by the manufacturer.

• Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. safety

devices, high pressure hoses, trigger gun.

• Water that has ﬂowed through a back ﬂow preventer is considered to be non-potable.

• Depending on the application, shielded nozzle can be used for high pressure cleaning, which will reduce

the emission of hydrous aerosols dramatically. However, not all applications allow the use of such a

device. If shielded nozzles are not applicable for the protection against aerosols, a respiratory mask of

class FFP 2 or equivalent may be needed, depending on the cleaning environment.

• The electric supply connection shall be made by a qualiﬁed electrician and comply with IEC60364-1. It

is recommended that the electric supply to this machine should include either a residual current device

that will interrupt the supply if the leakage current to earth exceeds 30mA for 30ms or a device that will

prove the earth circuit.

• Never touch the mains plug or power outlet with wet hands

• Always disconnect the product from the power outlet when leaving the machine unattended.

• This product must not be connected to the potable water mains without back ﬂow prevention. Check

local and national plumbing regulations before connecting the machine to the potable water mains.

• Do not operate the machine at temperatures below 0 degrees.

• If an extension cord is used, it shall be suitable for outdoor use, and the connection has to be kept dry

and off the ground. It is recommended that this is accomplished by means of a cord reel which keeps

the socket at least 60 mm above the ground.

• It is recommended that a reinforced garden hose (with minimum diameter of 12mm) is used for the inlet

connection.

• During use of high pressure cleaners, aerosols may be formed. Inhalation of aerosols can be hazardous

to health.

WARRANTY

2 Year Standard

+3 Ye ar Online Extension

WARRANTY

GPW-5000

GERNI Warranty Process

Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods

fail to be of acceptable quality and the failure does not amount to a major failure.

GERNI – 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 provides the following warranty in

relation to your Gerni Pressure Washer machine.

DOMESTIC WARRANTY

Deﬁnition; A machine purchased for domestic household use.

Gerni warrants that, subject to the exclusions and limitations below, the product will be free from

defects in the materials and workmanship for the duration of the warranty period from the date of

purchase.

2 YEAR STANDARD WARRANTY

Machines & accessories included are as follows: Gerni 3300*, 3600*, 5000*, 9000

*Subject to an additional 3 year extended warranty with online registration at www.gerni.com.au

5 YEAR STANDARD WARRANTY

Machines included are as follows: Gerni 5300*, 7000*, 7300*

*Subject to an additional 2 year extended warranty with online registration at www.gerni.com.au

2 YEAR STANDARD WARRANTY

All Gerni accessories are subject to a 2 year standard warranty, to qualify for an exchange of your

product you must have proof of purchase*.

*Extended warranty is not applicable to Gerni accessories, only pressure washer machines.

GERNI Warranty Claims

Equipment defects covered by the warranty will be repaired or replaced by one of our Authorised

agents within the Gerni organisation. Find your local service agent here: www.gerni.com.au

• If a fault occurs, the user must ﬁrst take their pressure washer machine to the closest Gerni

Authorised Agent to be diagnosed for fault. It is important that you have the pressure washer

serial number accompanied with your proof of purchase receipt and a copy of your Gerni online-

registration certiﬁcate to ensure your pressure washer is covered under warranty.

• If a fault is diagnosed and your machines is inside stated warranty period, then your machine will

be repaired or replaced at no cost. If your machine is diagnosed faulty but your machine has fallen

outside the stated warranty period, the cost of diagnosis or repair will be covered by the user.

Exclusions:

• The product has been modiﬁed, repaired, or serviced by someone other than a Gerni authorised

service centre.

• The product has been used other than for the purpose to which it is designed.

• The product has been exposed to user abuse such as knocks, bumps and extreme temperatures

conditions.

WARNING! When using mains-powered tools, basic safety precautions, including the following,

should always be followed to reduce risk of ﬁre, electric shock, personal injury and material

damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before

operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

The electrical motor has been designed for 230V and 240V only. Always check that the power supply

corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Gerni tools are interchangeable for Australia and New Zealand.

This tools is double insulated; therefore no earth wire is required.

Note: Double insulation does not take the place of normal safety precautions when operating

this tool. The insulation system is for added protection against injury resulting from a possible

electrical insulation failure within the tool.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid

a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not

suitable for the power input of the tool or which is damaged or defective may result in a risk of ﬁre and

electric shock.

Residual Current Device (RCD)

The pressure washer must be protected by a residual current device (rated at 30mA or less). A residual

current device reduces the chance of electric shock.

1-23 LETCON DRIVE, BANGHOLME, VICTORIA, AUSTRALIA 3175.

Produktspecifikationer

Varumärke:	Gerni
Kategori:	Högtryckstvätt
Modell:	5000
Färg på produkten:	Zwart
Barnlås:	Ja
Förpackningens vikt:	8000 g
Förpackningens bredd:	795 mm
Djuppackning:	154 mm
Förpackningshöjd:	555 mm
Blåtand:	Nee
Typ av förpackning:	Doos
Skärm diagonal:	32 "
Upplösning:	1366 x 768 Pixels
Inkluderar operativsystem:	Niet ondersteund
Ethernet LAN:	Ja
Skärmform:	Flat
Ljusstyrka:	250 cd/m²
Antal USB 2.0-portar:	1
Antal HDMI-portar:	2
Antal Ethernet LAN (RJ-45)-portar:	1
Smart TV:	Ja
Genomsnittlig effekt:	12 W
Strömförbrukning (i standby):	0.5 W
Antal högtalare:	2
HDR-stöd:	Nee
HD typ:	HD
Displayteknik:	DLED
Respons tid:	- ms
VESA montering:	Ja
Panelmonteringsgränssnitt:	200 x 100 mm
Djup (utan bas):	89 mm
Höjd (utan bas):	437 mm
Bredd (utan bas):	735 mm
Skärmdiameter i centimeter:	80 cm
PC-ingang (D-Sub):	Nee
Typ av tuner:	Analoog & digitaal
Digitalt signalformat:	DVB-C, DVB-S2, DVB-T2
Internet-TV:	Nee
Hybrid Broadcast Broadband TV (HbbTV):	Ja
Video-appar:	Amazon Prime Video, Freeview Play, Netflix, YouTube
Fungerar med Amazon Alexa:	Ja
Ljudlägen:	Classic, Flat, Movie, Music, Speech
Energiförbrukning (HDR) per 1000 timmar:	- kWu
Energiförbrukning (SDR) per 1000 timmar:	32 kWu
Energieffektivitetsklass (HDR):	Niet beschikbaar
webbläsare:	Ja
Rullbar skärm:	Nee
Enhetsbredd (med stativ):	735 mm
Djupenhet (med stativ):	189 mm
Enhetshöjd (med stativ):	471 mm
Vikt (med stativ):	6000 g
Inbyggd subwoofer:	Nee
Maximalt ljusstyrkaförhållande:	72 procent
Text-TV:	Ja
Equalizerinställningar:	Ja
Hybrid Broadcast Broadband TV (HbbTV) version:	2.0.2
Elektronisk TV-guide:	Ja
Automatisk kanalsökning:	Ja
Mobile High-Definition Link (MHL):	Nee
USB-inspelning:	Nee
Antal tuners:	1 tuner(s)
USB-kloning:	Ja
Grundläggande hotellläge:	Ja
Antal band equalizer:	5
Fjärrkontroll ingår:	Ja
Wifi:	Ja
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 Hz
Strömförbrukning (typiskt):	- W