GMG Yepp Easyfit carrier Bruksanvisning
Sidor 2 English Diverse
Läs bruksanvisningen för GMG Yepp Easyfit carrier gratis online eller ladda ner PDF:en. 25 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
Installation instructions for the Yepp® Easyfit carrier
1
Installation instructions for the Yepp® Easyfit carrier
Installation instructions for the Yepp® Easyfit carrier
The YeppEasyfit carrier is suitable for fitting to standard bicycle luggage carriers with a load capacity of
at least 60 lbs. The Yepp Easyfit carrier has a special installation frame for the Yepp Easyfit and the
Yepp Junior rear seat as well as to the GMG Classic 911 model child seats. The maximum width of the
carrier is 6.75 inches.
Installing the Yepp Easyfit carrier
Position the Yepp Easyfit carrier on the luggage carrier and insert the 4 bolts from above into the four
large slots. See the picture below for the proper positioning (pic.1).
Insert the bolts into the 4 clamps positioned under the Yepp Easyfit carrier. Note the proper position
of the clamps (pic.2).
Position the Yepp Easyfit carrier exactly on your luggage carrier and tighten the bolts firmly.
Pic. 1 Pic 2.
Warnings and Safety advices:
WARNING: Check the bolts frequently and tighten them again if necessary.
The Yepp Maxi Easyfit can be quickly and simply fitted after the installation.
The position of the child seat depends on the type and size of the cycle.
WARNING: The centre of gravity of the Yepp Maxi Easyfit model child seat must never be further
than 10cm / 3.75 inches behind the rear axle (see the user instructions for the Yepp Maxi Easyfit).
WARNING The Yepp Easyfit carrier can only be installed on luggage carriers with a load capacity of at
least 60 lbs.
IftheYepp Easyfit carrier is used with the Classic junior 911 model child cycle seat, the luggage carrier
musthave a load capacity of 78 lbs.
If you are installing a Yepp Maxi Easyfit model child seat, please check whether the bicycle
could tip over backwards when the child is in the seat. If so, move the Yepp Easyfit carrier
forwards.
Check frequently to ensure that all fittings are sufficiently tight.
Use the Yepp Easyfit carrier only on a bicycle that is in good working order, of a type suitable
for carrying the additional load, and of proper size and adjustment for the rider.
Check the owner’s manual that accompanied the bicycle or contact the bicycle manufacturer
or distributor to obtain this information.
The Yepp Easyfit carrier must not be used on motorised vehicles (including mopeds, scooters,
etc.) apart from E-bikes.
Never modify the carrier in any way.
Do not use the carrier if any part of it appears damaged.
RECOMMENDATION:
Use a good two-legged bicycle stand.
Produktspecifikationer
| Varumärke: | GMG |
| Kategori: | Diverse |
| Modell: | Yepp Easyfit carrier |
Behöver du hjälp?
Om du behöver hjälp med GMG Yepp Easyfit carrier ställ en fråga nedan och andra användare kommer att svara dig
Diverse GMG Manualer
GMG WINDSCHERM YEPP MINI Bruksanvisning GMG Yepp Junior Easyfit Bruksanvisning GMG Yepp Mini Bruksanvisning GMG Yepp e-bike set Bruksanvisning GMG Yepp Mini Ahead adapter Bruksanvisning GMG Yepp Maxi Bruksanvisning
Diverse Manualer
Nyaste Diverse Manualer
Ideen Welt LED sensor LX-LD-P300 Bruksanvisning Ideen Welt ZF6865 8 LED Camping lamp Bruksanvisning Ideen Welt Muis snoerloos Bruksanvisning Ideen Welt Koffer weegscaal Bruksanvisning Ideen Welt 9162-3 energie meter Bruksanvisning Ideen Welt Vliegenmepper elektrisch FS-801 Bruksanvisning Ideen Welt Lichtboog Kerst XD09-407 Bruksanvisning Ideen Welt Model 0323-2 bewegingsmelder Bruksanvisning Knog QUDOS ACTION - VIDEO LIGHT FOR GOPRO Bruksanvisning Filmer 40.121 Bruksanvisning