GoldAir GPORD02-24 Bruksanvisning

GoldAir element GPORD02-24

Läs gratis den bruksanvisning för GoldAir GPORD02-24 (9 sidor) i kategorin element. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om GoldAir GPORD02-24 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
General Care and Safety Guide
TECHNICAL SPECIFICATION
Model : GPORD - GPORD - GPORD -No 02 18 02 24 02 30
Supply: - / - / - /220 240 50VAC 60 220Hz 240 50VAC 60 220Hz 240 50VAC 60Hz
Wattage: W W W1800 2400 3000
Thank you for choosing a Goldair product. This Goldair has been designedunit
and manufactured high standards engineering and with proper and care,to of use
as described this leaet, will give you years useful service.in of
Please read these instructions carefully and retain them for future use.
the unit.
2. Keep all objects least 1 metre from the front andat
150 ends and ofmm from the sides the heater.
for commercial industrial use.or
4. asUse this unit only described this manual. Anyin
other use not recommended the manufactureris by
and ormay cause re, electric shock injury.
dust uthe unit. Ensure these deposits areor in
removed regularly turning othe unit andby
vacuum cleaning the unit.around
6. Always unplug unit when use.not in
7. When the unit has been unpacked, check forit
transport damage ensure all parts have beenand
delivered. parts are missing the unit has beenIf or
damaged, contact the Goldair Customer Services
Team.
properly, contact the place purchase theof or
Goldair Customer Services Team.
9. Do not connect the unit mains supply untilto
completely assembled adjusted.and
main unit.
11. Do not locate the unit directly below any power
socket outlet.
12. on heatEnsure heater is a stable -resistant surface.
build likely, which could sufcientup is be to
become a hazard.
14. Carry out regular checks the supply cordof to
ensure damage evident.no is
15. Do not operate this unit with a damaged cord, plug
or after the unit malfunctions has been droppedor
or damaged any manner. Return a qualiedin to
electrical person for examination, electrical service
or repair.
16. orDo not twist, kink wrap the cord around the unit,
as this may cause the insulation weaken andto
split. Always ensure that all cord been removedhas
from any cord storage area and unrolled beforeis
use.
17. It is isrecommended that this heater plugged
directly into the wall socket installed aor by
registered electrician accordance with AS/NZSin
3000 2007: .
18. Do not remove plug from power socket until the
unit switched o.has been
19. Do not remove plug from power socket pullingby
cord; always grip plug.
20. beArrange the cord so cannotit tripped over.
21. not heatDo place unit close radiantto source.
22. dryNever use the unit to clothes.
23. orDo not insert allow foreign objects enter anyto
ventilation exhaust opening, this causeor as may
an orelectric shock, re damage the unit.to
24. not onDo sit the unit.
25. onDo not use abrasive cleaning products this
unit. Clean with a damp cloth (not wet) rinsed in
hot soapy water only. Always isolate the unit from
the mains supply before cleaning.
26. Do innot operate areas where petrol, paint or
other ammable liquids used stored.are or
27. This unit not intended for use personsis by
(including children) with reduced physical, sensory
or of andmental capabilities lackor experience
knowledge, unless they supervised haveare or
been given instruction concerning the use theof
unit a person responsible for their safety.by
28. beChildren should supervised ensure that theyto
do not play with the unit.
29. Do innot use this unit the immediate surrounds of
a bath, a shower, a swimming pool otheror or
liquids. The unit must not immersedbe in any
liquids.
30. There are user serviceable parts installedno in
the unit.
31. Do innot place the unit wardrobes otheror
enclosed spaces this may cause re hazards.as
32. This unit not supposed used aroundis to be in or
locations where foodstus, works delicateof art or
articles science, etc stored.of are
33. WARNING you must not cover this heater.
Covering this heater presents re risk willand
activate the safety fuse; permanently disabling the
unit.
34. Do not use this heater with a programmer,
remote-control system, separate timer anyor
other device that switches the heater on
automatically since a re risk exists the heaterif is
covered positioned incorrectly.or
Before Installing Your Radiant Heater
It is recommended that these heaters are installed aby
registered electrician accordance with AS/NZS :2007.in 3000
The GPDOR - (3000 model must either hardwired02 30 W) be or
tted with a amp plug (not supplied) a registered15 by
electrician.
Always choose a safe location for the heater, keeping mindin
the safety precautions outlined.
WARNING: Keep all objects least 1 metre from the front andat
150mm from the ends the heater.of
Ensure all packaging has been removed from the unit before
use.
WARNING: In order to avoid overheating, do not cover the
heater.
WARNING: Never leave this heater unattended when powered
on.
Unit Measurements
Model : GPORD - L x W x H 7.5kgNo 02 18 1200 150 65mm
Model : GPORD - L x W x H 9.0kgNo 02 24 1500 150 65mm
Model : GPORD - L x W x H .0kgNo 02 30 1800 150 65 12mm
SUPPORT AND TECHNICAL ADVICE
Goldair New Zealand
Monday Friday 8am 5pm-
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair Australia
Monday Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au


Produktspecifikationer

Varumärke: GoldAir
Kategori: element
Modell: GPORD02-24

Behöver du hjälp?

Om du behöver hjälp med GoldAir GPORD02-24 ställ en fråga nedan och andra användare kommer att svara dig