GRE CIKPCOR60 Bruksanvisning

GRE Inte kategoriserad CIKPCOR60

Läs gratis den bruksanvisning för GRE CIKPCOR60 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 55 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 28 recensioner. Har du en fråga om GRE CIKPCOR60 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/7

ASSEMBLY SUGGESTIONS: WINTER COVERS

wooden pool container/composite pool container

Image of hooks

on the surface

Contents of the package: Canvas, Fixings, Perimeter fastening cable

Installation advice:

1- Place the cover on the pool:

- Unroll the cover along the pool container and centre it.

- Extend the cover over the pool container, holding it in the corners.

2- Pass the fastening cable through the eyelets.

3- Screw the hooks at a distance of about 30 cm below the edge and between the eyelets on the

cover.

Pass the cable through the hooks and adjust the tension by balancing the tensile forces of the

fixing panels.

Do not stretch the cable too much, leave it loose.

* If the cover is rectangular, ﬁx the corners ﬁrst; if it is not, start on a cut panel.

Installation advice:

1- Place the cover on the pool:

- Unroll the cover along the pool container and centre it.

- Extend the cover over the pool container, holding it in the corners.

2- Pass the fastening cable through the eyelets.

3- Stretch the cable so that it passes under the edge that surrounds the pool.

Remove the excess cable by sliding it through the hook (see image).

Stretch the cable and leave some slack.

* If the cover is rectangular, ﬁx the corners ﬁrst; if it is not, start on a cut panel.

Accessories for

wooden pool

Accessories for

composite pool

Eyelet

~ 80 cm

Rainwater

drainage

holes

Produktspecifikationer

Varumärke:	GRE
Kategori:	Inte kategoriserad
Modell:	CIKPCOR60
Bredd:	6560 mm
Djup:	3760 mm
Form:	Rektangulär
Material:	PVC
Användarvänlig:	Ja
Produktens färg:	Grå